TRX250r.org

Author Topic: Fourwerx Carbon Fiber Radiator Shroud Mounting  (Read 3271 times)

Offline havinnoj

Fourwerx Carbon Fiber Radiator Shroud Mounting
« on: August 07, 2018, 05:01:27 PM »
So FWC doesn't include mounting hardware with their carbon shrouds.  Anybody running a set?  And if so, how are you mounting them?  Can I rob an OMF set of the shoulder bushing and bolt?  Do I need the rubber grommet?  Kind of frustrated they aren't "ready to install" out of the box or I'd have pulled the trigger.

Offline huntertools

Re: Fourwerx Carbon Fiber Radiator Shroud Mounting
« Reply #1 on: August 07, 2018, 05:55:02 PM »
Best I remember mine bolted right up. I will check when I get home tonight.

Offline havinnoj

Re: Fourwerx Carbon Fiber Radiator Shroud Mounting
« Reply #2 on: August 07, 2018, 06:14:06 PM »
Best I remember mine bolted right up. I will check when I get home tonight.

Great thanks!

Offline Hawaiiysr

Re: Fourwerx Carbon Fiber Radiator Shroud Mounting
« Reply #3 on: August 08, 2018, 02:26:37 AM »
It's a must to use a grommet. The carbon will crack over time

Offline huntertools

Re: Fourwerx Carbon Fiber Radiator Shroud Mounting
« Reply #4 on: August 08, 2018, 05:14:15 AM »
Sorry I didn’t get back to you last night. Late night. Checked this morning and mine just bolted up and I used washers only. I agree that it would help to use a small thin grommet or O-ring on the back side and I may just do that this weekend. Mine has not cracked or come loose in three years of hard riding though. Love mine.

Offline havinnoj

Re: Fourwerx Carbon Fiber Radiator Shroud Mounting
« Reply #5 on: August 08, 2018, 03:02:21 PM »
Sorry I didn’t get back to you last night. Late night. Checked this morning and mine just bolted up and I used washers only. I agree that it would help to use a small thin grommet or O-ring on the back side and I may just do that this weekend. Mine has not cracked or come loose in three years of hard riding though. Love mine.

Great, thank you!

Offline Tbone07

Re: Fourwerx Carbon Fiber Radiator Shroud Mounting
« Reply #6 on: August 10, 2018, 10:45:27 AM »
Steve Buschinsky might be able to help you on this. His stainless shrouds are rubber mounted.

Not sure how the Fourwerx are done as I've never seen them. Do they still sell them new?
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline havinnoj

Re: Fourwerx Carbon Fiber Radiator Shroud Mounting
« Reply #7 on: August 13, 2018, 12:32:37 PM »
Steve Buschinsky might be able to help you on this. His stainless shrouds are rubber mounted.

Not sure how the Fourwerx are done as I've never seen them. Do they still sell them new?

Thanks Clay.  FWC still sells them new.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38