TRX250r.org

Author Topic: 2Nubs's boondock build  (Read 5332 times)

Offline Action69

Re: 2Nubs's boondock build
« Reply #60 on: November 28, 2018, 11:53:03 AM »
Looks like good times..👍

Offline hickwheeler

Re: 2Nubs's boondock build
« Reply #61 on: November 28, 2018, 11:57:04 AM »
Looks like you guys had fun. Drifting on chip seal roads is so much fun
88 ESR 330 5mil stroke
88 ct350pv (BOF Build)
Puma coming soon

Offline 2Nubs

Re: 2Nubs's boondock build
« Reply #62 on: December 03, 2018, 02:58:53 PM »
Well, it seems the 400ex throttle was going to be a pain to get working properly with my PWK, soooo more dollars. Quad might as well be a stripper the way I keep throwing money at it.

Picked up another polished throttle. This time the correct OEM unit from a 250R. Same guy that I bought the polished brake setup control setup from. Not sure what he used, but it is top notch polishing. Hopefully this one last a long time. They are proud of these old parts.




Offline 2Nubs

Re: 2Nubs's boondock build
« Reply #63 on: December 27, 2018, 10:03:11 AM »
The FourWerx hood has got to be the best mod I've done in the looks department. Excellent quality! Easy to see why so many people run these on their R. Hard to stop staring at it lol.

Over the holiday all the kids of my girl friend's family got their own quads (ages 4-9). It was awesome to see the excitement of a kid when they hopped on and fired up the new toy. We unloaded my quad and me and my girl friend doubled up and putted around letting them all beat me in a race. Good times!


Offline Hawaiiysr

Re: 2Nubs's boondock build
« Reply #64 on: January 03, 2019, 12:20:55 PM »
looking good nubs. Glad to hear quads were a hit at christmas. hopefully new riders for life.

Offline 2Nubs

Re: 2Nubs's boondock build
« Reply #65 on: February 19, 2019, 10:01:16 AM »
I got a little seat time this week on the R. I'm getting back to chipping away at the small to do list I have. Yesterday the clutch cable snapped a few miles from home so I have a new one on the way as well as some rear brake pads. Next will be a poly frame skid and some tires for my Hyper wheels.

I also need to buy a factory style chain slider for the swingarm. I threw the chain off a while back due to a warped sprocket and it got in between the countershaft and swingarm and chewed the TM Designworks chain block up pretty bad. I'm really not a fan of needing to drop the swingarm to replace it. Will add a poly case saver at that time.

I added my bling to the handlebars finally. Very pleased with the fresh factory throttle. No more slack.


Offline 2Nubs

Re: 2Nubs's boondock build
« Reply #66 on: March 25, 2019, 05:04:42 PM »
Bought a new flat hood for the R. Loved the scooped style, but wanted to try the flat one out as I like the original lines of the front end.

Supposedly this is the first one built by Fourwerx. It was sent to a guy for test fitment and was never used after that. I need to pick up a matching tank cover.


Offline croat1

Re: 2Nubs's boondock build
« Reply #67 on: March 25, 2019, 05:06:41 PM »
Nice score Myles

Joe

Offline hickwheeler

Re: 2Nubs's boondock build
« Reply #68 on: March 25, 2019, 05:21:59 PM »
Very nice
88 ESR 330 5mil stroke
88 ct350pv (BOF Build)
Puma coming soon

Offline broken1

Re: 2Nubs's boondock build
« Reply #69 on: March 26, 2019, 12:20:45 PM »
Was that hood from Bear81 on ebay?
overkill is an often underrated achievement

Offline 2Nubs

Re: 2Nubs's boondock build
« Reply #70 on: March 26, 2019, 01:27:47 PM »
Was that hood from Bear81 on ebay?

Yep that's it. Made an offer and he accepted.
86 330

Offline 2Nubs

Re: 2Nubs's boondock build
« Reply #71 on: March 26, 2019, 01:37:04 PM »
I'll be looking into how I want to repair my oil drain here soon. Looks to be using a NPT plug of roughly 15-16mm currently. Little things like this drive me absolutely nuts. Even when they work without issue, I just don't understand why people do things this way. I will hopefully have enough meat to work with and be able to get a proper bolt in there.
86 330

Offline jcs003

Re: 2Nubs's boondock build
« Reply #72 on: March 28, 2019, 09:04:44 AM »
looking good Nubs.  however, I am not seeing a CEO cylinder on this.  you should be ashamed.lol

Offline 2Nubs

Re: 2Nubs's boondock build
« Reply #73 on: March 28, 2019, 10:54:21 AM »
looking good Nubs.  however, I am not seeing a CEO cylinder on this.  you should be ashamed.lol

Needs a 370 CEO asap! Maybe I'll go ahead and buy that big ole pipe as motivation LOL

Offline meathead

Re: 2Nubs's boondock build
« Reply #74 on: April 06, 2019, 02:31:17 AM »
I run a OEM clutch cable, I have an aftermarket zip tied to the OEM one Just in case it breaks.