TRX250r.org

Author Topic: Stiff clutch  (Read 2219 times)

Offline The norm

Stiff clutch
« on: August 03, 2018, 10:46:44 PM »
I just replaced the clutch springs and cable and the clutch pull is extremely stiff. I had the clutch out and didn't see anything wrong. I need to get this figured out asap. Any ideas?
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline hickwheeler

Re: Stiff clutch
« Reply #1 on: August 03, 2018, 11:43:30 PM »
What springs did you use
88 hybrid 431 puma
88 (BOF Build) stock motor and oem 89 plastics
More in the works

Offline The norm

Re: Stiff clutch
« Reply #2 on: August 04, 2018, 11:09:54 AM »
I ordered what I thought were oem 88-89 springs. The seller used a trick we no too well.... Oem honda packages cut open with unknown brand parts in the bag. I have tried several different springs I had with the same result every time. I guess I will pull the clutch out and see if the rod is bent. I did that when I had the bottom end apart and it looked just fine.
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline 2Nubs

Re: Stiff clutch
« Reply #3 on: August 04, 2018, 12:12:53 PM »
The seller used a trick we no too well.... Oem honda packages cut open with unknown brand parts in the bag.


Man that is dirty right there.

I hope you get it figured out quick.
‘86 330

Offline The norm

Re: Stiff clutch
« Reply #4 on: August 04, 2018, 01:52:43 PM »
I used my phone a friend backup plan.  Thanks broken1......
I just pulled the clutch out and reassemble it. Nothing looks out of spec or in poor condition. It has to be the springs
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline jcs003

Re: Stiff clutch
« Reply #5 on: August 06, 2018, 06:58:23 AM »
while you have it apart you might want to do the Neil clutch mod.

Offline The norm

Re: Stiff clutch
« Reply #6 on: August 06, 2018, 08:25:28 AM »
The 89 update is on the list also
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38