TRX250r.org

Author Topic: Billet intake  (Read 4077 times)

Online croat1

Billet intake
« on: September 02, 2018, 07:59:14 PM »
another project being worked on by Sonny Fricia and Dave Moore


Offline hickwheeler

Re: Billet intake
« Reply #1 on: September 02, 2018, 08:02:13 PM »
I think it should work well
88 ESR 330 5mil stroke
88 ct350pv (BOF Build)
Puma coming soon

Offline broken1

Re: Billet intake
« Reply #2 on: September 02, 2018, 11:25:54 PM »
Nice looking piece.
overkill is an often underrated achievement

Offline jcs003

Re: Billet intake
« Reply #3 on: September 03, 2018, 10:07:12 AM »
looks nice.  what are the benefits?

Offline havinnoj

Re: Billet intake
« Reply #4 on: September 03, 2018, 07:50:05 PM »
looks nice.  what are the benefits?

Better fitment for those using ESR cylinder.  Maybe ESR cylinder versions have different intake angles but one comparison against a PRO-X showed 1* difference.  Seems like some people have no issue while others do have a problematic carb & air filter fitment. 

Offline havinnoj

Re: Billet intake
« Reply #5 on: September 03, 2018, 07:51:23 PM »
I think it should work well

Looks like it'll fit well.  I've heard some concerns over the added length causing lower signal to carb since it's moved back further relative to other intakes like stock, UPP, etc.

Offline Skeans1

Re: Billet intake
« Reply #6 on: September 03, 2018, 09:03:37 PM »
I think it should work well

Looks like it'll fit well.  I've heard some concerns over the added length causing lower signal to carb since it's moved back further relative to other intakes like stock, UPP, etc.

Going back to what Jerry Hall said before the site change I wonder about carb bowl vibrations with this style of intake.

Offline havinnoj

Re: Billet intake
« Reply #7 on: September 03, 2018, 09:06:39 PM »
Going back to what Jerry Hall said before the site change I wonder about carb bowl vibrations with this style of intake.

The black rubber boot hopefully provides enough insulation

Offline hickwheeler

Re: Billet intake
« Reply #8 on: September 03, 2018, 09:24:54 PM »
Should have a bit more than a rad valve I would think
88 ESR 330 5mil stroke
88 ct350pv (BOF Build)
Puma coming soon

Offline jcs003

Re: Billet intake
« Reply #9 on: September 04, 2018, 12:19:28 PM »
is there a picture of the angle difference of it mounted on a cylinder?

Online croat1

Re: Billet intake
« Reply #10 on: September 06, 2018, 08:50:51 AM »
one pic


Offline 2Nubs

Re: Billet intake
« Reply #11 on: September 06, 2018, 09:12:13 AM »
Looks like a lot of clearance gained.
86 330

Offline jcs003

Re: Billet intake
« Reply #12 on: September 06, 2018, 09:41:53 AM »
is this ready for purchase?

Online croat1

Re: Billet intake
« Reply #13 on: September 06, 2018, 10:18:27 AM »
Purchasing info...

Offline jcs003

Re: Billet intake
« Reply #14 on: September 06, 2018, 10:32:58 AM »
Thanks joe!  I wish to purchase one but do not have facebook?  any other way to get an order placed?

Thank you,

John