TRX250r.org

Author Topic: Roll design chain slider  (Read 2469 times)

Offline Michael88R

Roll design chain slider
« on: November 08, 2018, 09:59:20 PM »
Anyone know where I can get a chain slider like the one pictured for a roll design lobo swingarm?  I’m running stock frame and my chain rubs the front of the swingarm.  Looking for this style slider to protect it.  Any help would be greatly appreciated.  I think Bear81 used to sell them on eBay but I don’t see it listed anymore.
88’ R Esr 350 CEO, Esr trx5 pipe
88’ R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

Offline hickwheeler

Re: Roll design chain slider
« Reply #1 on: November 08, 2018, 10:10:39 PM »
Doesn't TM designworks make one that would work. They have the for different style aftermarket swingarms
88 hybrid 431 puma
88 (BOF Build) stock motor and oem 89 plastics
More in the works

Offline Michael88R

Re: Roll design chain slider
« Reply #2 on: November 08, 2018, 11:00:51 PM »
Thanks, I’ll check with TM.  Roll Design uses a roller.  I’m wanting one that wraps the front of the swingarm.  I’ve already rubbed grooves in my swingarm after two trips.
88’ R Esr 350 CEO, Esr trx5 pipe
88’ R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

Offline 2Nubs

Re: Roll design chain slider
« Reply #3 on: November 09, 2018, 09:34:17 AM »
Crazy that the chain rides up high enough to hit that area. I guess it's rare if you only have the one groove.
‘86 330

Offline Burns363R

Re: Roll design chain slider
« Reply #4 on: November 09, 2018, 02:21:29 PM »
I have a brand new one i will sell.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline Michael88R

Re: Roll design chain slider
« Reply #5 on: November 10, 2018, 09:38:26 AM »
I’ll take it!
88’ R Esr 350 CEO, Esr trx5 pipe
88’ R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

Offline Michael88R

Re: Roll design chain slider
« Reply #6 on: November 10, 2018, 09:46:34 AM »
Crazy that the chain rides up high enough to hit that area. I guess it's rare if you only have the one groove.

My shock set up could have been contributing to the problem but Jed from roll design says it’s common to rub there.  Lobo frames have an extra roller on the bottom that helps.
88’ R Esr 350 CEO, Esr trx5 pipe
88’ R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

Offline Michael88R

Re: Roll design chain slider
« Reply #7 on: November 10, 2018, 09:47:42 AM »
If you zoom, you can see the extra roller.
88’ R Esr 350 CEO, Esr trx5 pipe
88’ R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

Offline Michael88R

Re: Roll design chain slider
« Reply #8 on: November 18, 2018, 11:51:15 AM »
Received my new slider.  Thank you Kyle!
88’ R Esr 350 CEO, Esr trx5 pipe
88’ R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38