Author Topic: Plus 2 gull wings (Read 4781 times)

Wolvman99 · « **on:** July 04, 2013, 04:06:21 PM »

Did or does anyone make plus 2 long travel gull wing A arms that look like the plus 3 arms ? Like the look just don't want the extra width

GO OVRIT · « **Reply #1 on:** July 05, 2013, 08:17:11 AM »

Alba makes +2 arms for the 400ex that should work. I don't know anything about them, just what I read when I was shopping.

motofool250r · « **Reply #2 on:** July 05, 2013, 11:36:29 AM »

Gibson, and herman arms are the only two for 250r's i know of

GO OVRIT · « **Reply #3 on:** July 05, 2013, 12:22:41 PM »

Can you still get Gibson? They're some of the coolest looking arms.

motofool250r · « **Reply #4 on:** July 05, 2013, 12:25:43 PM »

kind of i can get parts for my +3's but if you dont know how/where it would be hard to do.

derby · « **Reply #5 on:** July 05, 2013, 03:22:03 PM »

what about roll design? You can usually pick up a nice set pretty reasonable especially if they are 400ex.

Wolvman99 · « **Reply #6 on:** July 07, 2013, 08:47:25 PM »

Ok thanks do the 400 ex arms fit and handle good with the RITE size spacers ?

derby · « **Reply #7 on:** July 14, 2013, 11:46:19 AM »

I have 400ex roll on mine and they work very well. I found that lsr bushings would press right into the roll a-arms and be the correct width so no spacers were needed. I also hated using heim joints on the top a-arms. So I replaced those with the std ball joint. 250r roll were harder to come by and they were more expensive used.

Deuce · « **Reply #8 on:** July 14, 2013, 01:43:05 PM »

Gibson only came in a +3 for the gullwing I believe. Try calling east coast atv... Dave Gibson (who made the gibson arms) runs the show there. Maybe he can help you out a little more if you want to go that route

Deuce · « **Reply #9 on:** July 15, 2013, 01:06:29 AM »

Actually gibson made a +1 gullwing setup for xc it looks like. I stumbled across this when I was shopping for gibsons for my hybrid. If you're interested I can get you the contact information of the seller who has them. They are for a 400ex but will work fine with spacers.