TRX250r.org

Poll

Anyone have advice on whether I should go with a 1988 or 89 front spindle set up so I can buy Lonestar billet Hobbs and new rotors

?
0 (0%)
?
0 (0%)

Total Members Voted: 0

Author Topic: 1986 250r front spindles ?????  (Read 261 times)

Offline Ant1986250r

1986 250r front spindles ?????
« on: January 23, 2019, 05:04:33 PM »
Anyone know which spindle is better to go with 88 or 89? I found Lonestar billet Hobbs and also streamline rotors that will bolt right up to them the only reason why am changing the spindles because I canít find a good set of rotors for my 86 .Iím really not thrilled about converting to a 400 EX front set up.I found a really nice set of spindles on eBay but the guy that selling them doesnít know if they are 88 or 89ís and the guy am ordering the billet lonestar hubs from needs to know if they are 88 or 89 .this is what they look like
« Last Edit: January 23, 2019, 05:10:54 PM by Ant1986250r »

Online croat1

Re: 1986 250r front spindles ?????
« Reply #1 on: January 23, 2019, 05:23:04 PM »
The spindles in the pics you posted are 88ís

Joe

Offline Ant1986250r

Re: 1986 250r front spindles ?????
« Reply #2 on: January 23, 2019, 07:07:02 PM »
Ok thatís what I thought thank you !

Online croat1

Re: 1986 250r front spindles ?????
« Reply #3 on: January 23, 2019, 08:05:12 PM »
The spindles you posted look good. Iíd say the 89ís are the best design (the tapered spindle shaft).  So, since aftermarket hubs are almost non existent for 86 and 87ís...purchase the niceset 88/89 spindles you can find. 

Joe

Offline havinnoj

Re: 1986 250r front spindles ?????
« Reply #4 on: January 23, 2019, 08:12:54 PM »
Yes believe those are 88 spindles.  It's been so long since I've ran anything besides a tapered spindle design but *I believe* you can use the 89 hubs on that spindle AS LONG AS you remove the 89 tapered collar and use the correct bearings.  Memory a little foggy here.

Offline Ant1986250r

Re: 1986 250r front spindles ?????
« Reply #5 on: January 23, 2019, 10:58:44 PM »
Yes they are the nicest ones that Iíve came across and lonestar will make the hubs for the 88 style spindles . I just needed to confirm what I was actually buying because with full overhaul builds sometimes it could take more than a year to complete and by the the time you actually get to assembly the parts were purchased 6-8-10 months prior then your kind of stuck if they are wrong

Offline sameltoe

Re: 1986 250r front spindles ?????
« Reply #6 on: January 23, 2019, 11:09:05 PM »
I have a set of 89 spindles with lsr hubs(3 bolt rotors) good calipers and will send new bearings with them for 250 shipped. Pm me an I will text you pics. I'm not savvy enough to figure out how to post pics. I'm sure plenty of people will vouch for my credibility...
I also have a set of 88 spindles with oem hubs and calipers for 175 shipped.
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline havinnoj

Re: 1986 250r front spindles ?????
« Reply #7 on: January 23, 2019, 11:36:07 PM »
I'm sure plenty of people will vouch for my credibility...
I also have a set of 88 spindles with oem hubs and calipers for 175 shipped.

Yep good guy here!

Offline sameltoe

Re: 1986 250r front spindles ?????
« Reply #8 on: January 24, 2019, 10:08:59 PM »
I'd separate spindles if that's all you want also...
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline Hawaiiysr

Re: 1986 250r front spindles ?????
« Reply #9 on: January 25, 2019, 06:53:10 PM »
Sam's a good guy. Don't hesitate to buy anything from him.

Offline Hawaiiysr

Re: 1986 250r front spindles ?????
« Reply #10 on: January 25, 2019, 06:53:35 PM »
😘 luv u babe

Offline sameltoe

Re: 1986 250r front spindles ?????
« Reply #11 on: January 26, 2019, 11:03:01 AM »
[quote
😘 luv u babe
Happy belated birthday buddy!

Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline Hawaiiysr

Re: 1986 250r front spindles ?????
« Reply #12 on: January 26, 2019, 11:48:00 PM »
Thanks homie

Offline Ant1986250r

Re: 1986 250r front spindles ?????
« Reply #13 on: February 20, 2019, 09:11:31 AM »
@sameltoe , sorry for not getting back to you right away I just logged in and seen this now . YES I definitely would like to get the 89 spindles /lsr hubs from you hereís my cell 954-397-8080 please text or call whenever you have a chance thAnk you !