TRX250r.org

Author Topic: Wanted Trx or Atc Shift shafts damaged, broken, unusable, welded, cut off  (Read 2149 times)

Offline MotoX_Racer07

I’ll buy your old junk, unusable bent, stripped splined, welded or cut off shift shafts. I machined a few new splined shafts for few motors I’m piecing together from all the parts l’ve been accumulating over the years. Just need the actuator on the ends to weld to the shaft. Thanks

Offline Hawaiiysr

I'll have one in the near future. Are you the guy that sells refurbished shafts. If so I been looking for you. I need a few shafts

Offline MotoX_Racer07

No, I just do these for my personal bikes and I’ve done a few of my buddies in the past. Ones I’ve done in previous years back were Cr250 Shafts I cut off machined and tig welded to bad trx250r shafts. The new ones I’m making are comeplete new shafts and splines. I just tig weld the actuator on the end. I made a fixture off a good shaft for proper alignment of splines and the actuator. I’m just trying to make obsolete parts go further and refuse to pay the eBay prices for worn splines.

Offline Hawaiiysr

oh i see. well if you could offer your services here we would be most grateful. off the top of my head i need 2

Offline Pumashine

I will take a look today. You can have my spares for no charge. Always willing to help the brethren.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline MotoX_Racer07

I’m fine paying a fair price for parts & shipping honestly. PayPal works for me, I appreciate it.

Offline Pumashine

I threw the damaged ones out. I have 6 here. I will keep 2 and ship you 4 shift shafts.  PM me your paypal.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline MotoX_Racer07

Pm’d

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38