TRX250r.org

Author Topic: 450r to 250r peg adapters  (Read 5975 times)

Offline Cmoss09

450r to 250r peg adapters
« on: April 27, 2019, 10:19:06 AM »
When I ordered my gusset kit from pumashine last year I noticed that he had peg adapters listed, but not in stock. Are there any other places that sell something like this? Thanks

Offline croat1

Re: 450r to 250r peg adapters
« Reply #1 on: April 27, 2019, 07:15:40 PM »
Tony is the only person that I’ve seen make them

Joe

Offline desertR

Re: 450r to 250r peg adapters
« Reply #2 on: April 28, 2019, 01:25:03 AM »
There is nothing that i know of for the'88/89' model years, but the pieces for the '86/87' are easy to fab up. I used 7075 aluminum to make mine and the 450R footpegs cost less then $20.00
desertR

Offline Cmoss09

Re: 450r to 250r peg adapters
« Reply #3 on: April 30, 2019, 01:04:49 PM »
Croat1 do you know if he still makes a batch of these occasionally or are they discontinued?

Offline Tbone07

Re: 450r to 250r peg adapters
« Reply #4 on: May 01, 2019, 07:37:39 AM »
@Pumashine
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline Tbone07

Re: 450r to 250r peg adapters
« Reply #5 on: May 02, 2019, 05:34:04 PM »
Moved this thread to Pumashine's forum section.
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline Pumashine

Re: 450r to 250r peg adapters
« Reply #6 on: May 04, 2019, 04:20:35 PM »
I cut some adapters for the 86-87 models and have to get them to plating. Also did some ATC adapters. I am currently doing physical therapy to get my right hand to function. Should have adapters ready to ship in a couple weeks. Things are just going a lot slower.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Burns363R

Re: 450r to 250r peg adapters
« Reply #7 on: May 06, 2019, 03:26:24 PM »
so is anyone making 86/87 foot pegs. I need some.  $$$
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Online The norm

Re: 450r to 250r peg adapters
« Reply #8 on: May 06, 2019, 08:53:14 PM »
so is anyone making 86/87 foot pegs. I need some.  $$$

I have made a few
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline Burns363R

Re: 450r to 250r peg adapters
« Reply #9 on: May 09, 2019, 09:09:40 AM »
Ah im looking for a round tube peg that goes into a nerf that adapts to 86/87
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline Sand_Blaster

Re: 450r to 250r peg adapters
« Reply #10 on: May 09, 2019, 08:47:21 PM »
Kyle it says out of stock but you could give em a email and check. It's where I got mine.
https://www.walshrc.com/product/frame-foot-pegs-mounts/
87 Trx250r & 99 Banshee

Offline Burns363R

Re: 450r to 250r peg adapters
« Reply #11 on: May 14, 2019, 09:22:47 AM »
is the 450r bolt pattern the same as the 250r?
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

Offline Pumashine

Re: 450r to 250r peg adapters
« Reply #12 on: May 20, 2019, 04:30:29 PM »
Not even close.
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Pumashine

Re: 450r to 250r peg adapters
« Reply #13 on: May 20, 2019, 05:06:50 PM »
Peg adapters
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Burns363R

Re: 450r to 250r peg adapters
« Reply #14 on: May 29, 2019, 11:00:50 AM »
is the 450r frame bolt pattern the same as the 250r frame bolt pattern?  As far as Center to center of the holes?
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, 200w OEM Ignition

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38