TRX250r.org

Author Topic: 86 swing arm resto  (Read 1455 times)

Offline evaneyeball

86 swing arm resto
« on: April 23, 2020, 10:55:26 PM »
My swingarm needed a powder coat job so I started it and I sandblasted for about 5 hours straight. Before and after blasting
LED built 86 trx 350 CEO
81 ATC250r
Zero finesse and alot of throttle

Offline ytman

Re: 86 swing arm resto
« Reply #1 on: April 24, 2020, 10:10:55 AM »
Looks good. I’ve been thinking about getting a HF blasting cabinet myself. Do you have a professional set up?

Offline havinnoj

Re: 86 swing arm resto
« Reply #2 on: April 24, 2020, 12:05:14 PM »
Looks nice. What color are you going with?

Offline evaneyeball

Re: 86 swing arm resto
« Reply #3 on: April 24, 2020, 12:24:57 PM »
i did it last night and it looks awesome but for some reason i cant post pictures oh well its in a flat black. black jack on prismatic powders website.  and i dont have a professional set up i have a hf cabinet with a bottom feeder a eastwood pedal gun and we cut the platform in it down so you have way more room. and as for powder coating i just have a eastwood gun and a homemade cabinet with a regular kitchen oven
LED built 86 trx 350 CEO
81 ATC250r
Zero finesse and alot of throttle

Offline desertR

Re: 86 swing arm resto
« Reply #4 on: April 24, 2020, 02:10:43 PM »
HAHAHA When I was a kid, the exhaust paint that we used on our dirt bikes had to be "cured" in a oven at 200*F and moms oven got taken over for our curing. It always smelled "different"  I stopped by that house several years after it was sold and the new owner asked me in to see what he had done, A complete kitchen makeover with a new oven. He said that the oven always had a funny smell, I smiled but didn't tell him. He also said that the ghost (my grandpa) downstairs had left when my folks left. Not sure I believe that.
desertR

Offline evaneyeball

Re: 86 swing arm resto
« Reply #5 on: April 24, 2020, 02:14:22 PM »
i dont use my moms oven got a beater from a junk place and put it in the shop. my mom would be pissed if i did it in her oven but then again the food might actually tast better lol.
LED built 86 trx 350 CEO
81 ATC250r
Zero finesse and alot of throttle

Offline evaneyeball

Re: 86 swing arm resto
« Reply #6 on: May 31, 2020, 08:18:39 PM »
I finally got it all finished and put together. I've been working on a banshee for a long time and haven't gotten around to it
LED built 86 trx 350 CEO
81 ATC250r
Zero finesse and alot of throttle

Offline 2ndmoto

Re: 86 swing arm resto
« Reply #7 on: May 31, 2020, 09:24:20 PM »
Balla. Looks good

Offline havinnoj

Re: 86 swing arm resto
« Reply #8 on: June 01, 2020, 07:33:33 PM »
Dang man, looks sharp!

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38