TRX250r.org

Author Topic: 86 swing arm resto  (Read 296 times)

Offline evaneyeball

86 swing arm resto
« on: April 23, 2020, 10:55:26 PM »
My swingarm needed a powder coat job so I started it and I sandblasted for about 5 hours straight. Before and after blasting
LED built 269

Offline ytman

Re: 86 swing arm resto
« Reply #1 on: April 24, 2020, 10:10:55 AM »
Looks good. Iíve been thinking about getting a HF blasting cabinet myself. Do you have a professional set up?

Offline havinnoj

Re: 86 swing arm resto
« Reply #2 on: April 24, 2020, 12:05:14 PM »
Looks nice. What color are you going with?

Offline evaneyeball

Re: 86 swing arm resto
« Reply #3 on: April 24, 2020, 12:24:57 PM »
i did it last night and it looks awesome but for some reason i cant post pictures oh well its in a flat black. black jack on prismatic powders website.  and i dont have a professional set up i have a hf cabinet with a bottom feeder a eastwood pedal gun and we cut the platform in it down so you have way more room. and as for powder coating i just have a eastwood gun and a homemade cabinet with a regular kitchen oven
LED built 269

Offline desertR

Re: 86 swing arm resto
« Reply #4 on: April 24, 2020, 02:10:43 PM »
HAHAHA When I was a kid, the exhaust paint that we used on our dirt bikes had to be "cured" in a oven at 200*F and moms oven got taken over for our curing. It always smelled "different"  I stopped by that house several years after it was sold and the new owner asked me in to see what he had done, A complete kitchen makeover with a new oven. He said that the oven always had a funny smell, I smiled but didn't tell him. He also said that the ghost (my grandpa) downstairs had left when my folks left. Not sure I believe that.
desertR

Offline evaneyeball

Re: 86 swing arm resto
« Reply #5 on: April 24, 2020, 02:14:22 PM »
i dont use my moms oven got a beater from a junk place and put it in the shop. my mom would be pissed if i did it in her oven but then again the food might actually tast better lol.
LED built 269

Offline evaneyeball

Re: 86 swing arm resto
« Reply #6 on: May 31, 2020, 08:18:39 PM »
I finally got it all finished and put together. I've been working on a banshee for a long time and haven't gotten around to it
LED built 269

Offline 2ndmoto

Re: 86 swing arm resto
« Reply #7 on: May 31, 2020, 09:24:20 PM »
Balla. Looks good

Offline havinnoj

Re: 86 swing arm resto
« Reply #8 on: June 01, 2020, 07:33:33 PM »
Dang man, looks sharp!

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38