TRX250r.org

Author Topic: Radiator Hose Clamps - What Width OEM?  (Read 282 times)

Offline havinnoj

Radiator Hose Clamps - What Width OEM?
« on: May 16, 2020, 02:53:34 AM »
It dawned on me today Im not sure I even remember what the width of oem radiator hose clamps is - Ive used 9/16 wide and 1/2 wide over the years but anyone know what came factory?  Have been using Tridon 13/27 10s in stainless for years with good luck. 

Offline Hawaiiysr

Re: Radiator Hose Clamps - What Width OEM?
« Reply #1 on: May 16, 2020, 01:54:34 PM »
wasnt there a discussion about clamps? i remember Jerry jumping in on it also

Offline Langbolt

Re: Radiator Hose Clamps - What Width OEM?
« Reply #2 on: May 27, 2020, 08:57:39 AM »
If you want some nice non marring clamps in Stainless.....these are what I use :) 9mm

https://www.belmetric.com/stainless-norma-torro-9-12-c-15_145_1045/cr1320ss-norma-stainless-hose-clamp-9mm-wide-p-5703.html

« Last Edit: May 27, 2020, 09:02:54 AM by Langbolt »

Offline havinnoj

Re: Radiator Hose Clamps - What Width OEM?
« Reply #3 on: May 28, 2020, 06:07:34 PM »
If you want some nice non marring clamps in Stainless.....these are what I use :) 9mm

https://www.belmetric.com/stainless-norma-torro-9-12-c-15_145_1045/cr1320ss-norma-stainless-hose-clamp-9mm-wide-p-5703.html



Yep Norma Torro clamps are great too.
« Last Edit: May 28, 2020, 06:10:32 PM by havinnoj »

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38