TRX250r.org

Author Topic: Kick starter spindle collar  (Read 2504 times)

Online The norm

Kick starter spindle collar
« on: September 22, 2020, 12:50:23 AM »
Good evening everyone! I am in search of the 20x27 collar for an 86 kick starter spindle shaft, part number  28283-HA2-010. I can't afford Ebay prices so be gentle lol. If I can't find a collar I suppose I will machine one out of 4140.
Loren


#9

1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline croat1

Re: Kick starter spindle collar
« Reply #1 on: September 22, 2020, 12:45:10 PM »
Loren, I just checked to see if I had a spare....no spares.  I can get one made if you don’t have the time.

Joe

Online The norm

Re: Kick starter spindle collar
« Reply #2 on: September 22, 2020, 03:49:12 PM »
I think I have the time as I am stuck in the shop at work until I get off light duty. The shop I am in has a pretty fantastic machine shop area!!! I just worry about the dimensions. Is it really 20x27? I will machine one and see lol
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline broken1

Re: Kick starter spindle collar
« Reply #3 on: September 22, 2020, 08:47:46 PM »
I txt you the dimensions awhile ago, I take it you deleted that one?lo!

Online The norm

Re: Kick starter spindle collar
« Reply #4 on: September 22, 2020, 09:21:29 PM »
I txt you the dimensions awhile ago, I take it you deleted that one?lo!

I guess I forgot lol. I will scan through my texts. Thanks Kevin
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline broken1

Re: Kick starter spindle collar
« Reply #5 on: September 23, 2020, 12:21:06 AM »
I'll measure the one from the engine I'm rebuilding & txt it to you again.

Offline Pumashine

Re: Kick starter spindle collar
« Reply #6 on: September 24, 2020, 09:17:47 PM »
1.065" OD or 27mm  .803 ID  and 1.178" long, about 30mm long. I think Carlos makes them.
« Last Edit: September 24, 2020, 09:21:17 PM by Pumashine »
Puma 408, Puma 431,  Pilot 412, Puma 431, Mini-tooth 486 Trx450r
89mm  Mini tooth Shearer in frame pipe chromed! With Cascade  Q

Offline Hawaiiysr

Re: Kick starter spindle collar
« Reply #7 on: September 27, 2020, 03:15:47 AM »
I'll push start my R before I ever purchase from him

Online The norm

Re: Kick starter spindle collar
« Reply #8 on: September 27, 2020, 03:31:22 PM »
I'll push start my R before I ever purchase from him

Lmao me too!
Luckily I have a lathe or two at my disposal and a supply of 4140 ready for me to transform in to a collar.
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline 2ndmoto

Re: Kick starter spindle collar
« Reply #9 on: September 27, 2020, 05:54:30 PM »
Make a few and help the community out

Online The norm

Re: Kick starter spindle collar
« Reply #10 on: October 07, 2020, 08:17:51 PM »
Problem solved...... 4140 tgp shaft.

1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline matt250r21

Re: Kick starter spindle collar
« Reply #11 on: October 07, 2020, 08:28:18 PM »
nice job

Offline 2ndmoto

Re: Kick starter spindle collar
« Reply #12 on: October 08, 2020, 12:01:55 AM »
Smoking hotness

Offline Hawaiiysr

Re: Kick starter spindle collar
« Reply #13 on: October 08, 2020, 05:53:26 PM »
right on

Offline desertR

Re: Kick starter spindle collar
« Reply #14 on: October 08, 2020, 07:03:17 PM »
Why 4140 ? If you have it laying around, great, but I probably would have gone with aluminum. The kick starter is not a high load area. I also have lots of aluminum laying around.
desertR

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38