Tips and tricks

[broken1]

For anyone that wants to replace their Rusty & corroded Rear Master Cylinder rod - the Suzuki (Part#69670-00A00) fit's like a charm!

I recognize that rear MC It's been working 4 years now with the Suzuki push-rod & had no issues.

[atvmxr]

If you lose the discontinued collar that goes with the bolt that holds your front OEM fender in place.....no worries...just replace it with this HONDA Part#90104-MEN-A30.....It has the shoulder built into it!

thank you!  i had a post somewhere where I was talking about how I thought the R came with an encapsulated collar, but no one knew what I was talking about.  guess the previous owner swapped them out

[Langbolt]

If you're looking for the rubber grommets that go on the frame pegs to support the front of the Air Box (Honda Part#  19032-HB9-000 - DISCONTINUED) Item# 28 on the Air Cleaner fiche - Have no fear! YAMAHA has a grommet that works perfectly!

YAMAHA Part# 90480-12053-00

 

[croat1]

John, nice find on the air box grommet and shouldered fender bolt.

Joe

[croat1]

If your exhaust flange has no spring mounts you can use some #428 chain side plates.  Drill and bend as needed.


Joe

[croat1]

Air box filter sheet

[croat1]

Cable operated choke

[croat1]

Oem 8 plate clutch

[croat1]

Another faulty CDI fix is to heat it in the oven.

http://pilotodyssey.com/PO/viewtopic.php?f=24&t=18604