TRX250r.org

Author Topic: LED Performance TRX250R Intake for Roll Design No Link Frame  (Read 11574 times)

Offline ledperformance

LED Performance TRX250R Intake for Roll Design No Link Frame
« on: August 15, 2013, 11:44:07 AM »
We have designed a high volume stainless steel intake for Roll Design TRX 250R. Because the stock intake isn't able to flow enough air for big bore cylinders.
[ATTACH=CONFIG]1404[/ATTACH]
This is a view through the air filter end of the intake.
[ATTACH=CONFIG]1405[/ATTACH]
Side view of intake with bolt on frame bracket.
[ATTACH=CONFIG]1406[/ATTACH]
The tube is oval so it clears the shock though out suspension travel.
[ATTACH=CONFIG]1407[/ATTACH]
We are building a limited number of these intakes. If you are interested please contact Arlan at 503-522-2465.

Offline 05450r

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #1 on: August 15, 2013, 11:52:48 AM »
Holy wow,killer job guys!!!
04 450r XC
LNP Like New Parts Powder Coating

Offline Rupp250

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #2 on: August 15, 2013, 11:57:16 AM »
Wow that is nice. Anything for a stock frame set-up?
DRAG- Puma in a Ziggy Chassis
TRAIL -86  250R ported stock cylinder
DUNER -86 250R  Flinstone

Offline rsss396

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #3 on: August 15, 2013, 02:28:51 PM »
Those look awesome!
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline sameltoe

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #4 on: August 15, 2013, 02:57:59 PM »
He had something up on his facebook page awhile ago fora stock frame... pretty fair price too!
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline ledperformance

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #5 on: August 15, 2013, 02:59:28 PM »
We build a hi volume intake for stock frame TRX and for the 4 strokes as well. That is one of our best selling items. It optimizes the intake track length, and improves air flow. On the stock frame 250R intake we form a velocity stack shape after the straight section at the carburetor mouth and then use a cone to step up to a large mouth air filter. This shape gives us a large plenum area to hold filtered air and the divergence of cone broadens the power band. The cone shape helps us maximize the intake volume in the space we have and organizes the air so it is coming straight into the mouth of the carburetor. We always see hp gains with this design. The more hp the engine is making the higher the gains.

Offline ledperformance

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #6 on: August 15, 2013, 03:01:23 PM »
Thank you!

Offline Burns363R

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #7 on: August 15, 2013, 03:14:37 PM »
Do you make one for a laeger framed/ CR500 link combo?

Looks sick.  Id like to have one to replace my stock intake boot.  Unfortunatly i would still want to use some sort of airbox.  running in mud is no bueno on open filters.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Stock frame(gusseted)LRD Sub Fram,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 A/S Carb, CR Ignitio

Offline Michael88R

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #8 on: August 15, 2013, 11:33:56 PM »
Very nice.  Glad to see LED making new products for the TRX250R, especially something that is only for no-link set ups.  Even more impressive.
88 R Esr 330PV, Esr trx7 porting, Esr trx6 pipe
88 R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

Offline enri330r

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #9 on: August 15, 2013, 11:46:18 PM »
arlan very good job! they look great!

Offline Victork

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #10 on: August 17, 2013, 01:10:00 AM »
Wow! Badass

Offline Allison#51

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #11 on: August 17, 2013, 06:35:00 AM »
Wow very cool! I wish I could run without an airbox I'd be all over this.

Offline ledperformance

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #12 on: August 17, 2013, 02:00:31 PM »
We will probably add an air box to the intake this winter when we are not so busy.

Offline sameltoe

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #13 on: August 17, 2013, 03:25:15 PM »
Quote from: ledperformance;8942
We will probably add an air box to the intake this winter when we are not so busy.
Now we're talkin! This IS when I will buy one for sure! I just can't afford the chances of water with no box
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline supernutt

LED Performance TRX250R Intake for Roll Design No Link Frame
« Reply #14 on: August 17, 2013, 03:44:36 PM »
Sign me up for one also for a CR500 link narrow Laeger frame with an airbox
86r 310 pro-x C-Leigh ported TRX5 CR ignition HLS shocks 38pwk
97 Laeger XC narrow CR500 link +4  t-pin
89 trx250r PEP ported ct mid pipe

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38