LSR Chassis w/ CR250 ignition + wiring harness pictures ?

[Justin4141]

Does anyone have pictures of how they ran there wiring harness with a 01 Cr 250 ignition on a Lonestar chassis ? Looking to clean mine up an need ideas !

[croat1]

I don’t have a Lonestar but I’ll post a CR ignition being used with a Laeger. 

I’ll get pics later today.

Joe

[croat1]

Starting with a CR kill switch.

[croat1]

Pumashine round tube coil mount.  CR cdi mounted where a trx coil would go using the CR rubber cushion.

[croat1]

Sharing that this harness is also available….

https://www.southtexasbanshee.com/product-page/trx-250r-cr250-ignition-harness

[atvmxr]

I thought the pumashine coil mounts were discontinued?  Mine is a hot mess, held in place with zip ties.  coil where stock one is, cdi where stock one is.  but its made it through several MX and arenacross races. 

I need to install my zeel anyway

[Langbolt]

I thought the pumashine coil mounts were discontinued?  Mine is a hot mess, held in place with zip ties.  coil where stock one is, cdi where stock one is.  but its made it through several MX and arenacross races. 

I need to install my zeel anyway

If you can find an ESR coil moint they work great! I used mine along with a couple handlebar clamps to get it to mount up to the round tube of my LAEGER.

[atvmxr]

can you snap a pic of how your rear shocl reservoir and hose is routed?   My LSR has a little cross brace by the front seat mount and its right in the way of my hose.  at least the way I think its supposed to be routed

[havinnoj]

I thought the pumashine coil mounts were discontinued?  Mine is a hot mess, held in place with zip ties.  coil where stock one is, cdi where stock one is.  but its made it through several MX and arenacross races. 

I need to install my zeel anyway

If you can find an ESR coil moint they work great! I used mine along with a couple handlebar clamps to get it to mount up to the round tube of my LAEGER.

Clever using the handlebar mount, I used to drill those ESR mounts and use a "u" bolt with threads to clear the round tube.