Messages

1

Carburetor, Intake, and Exhaust / Starting issues

« on: August 14, 2014, 04:27:20 PM »

Alright ill have to get that checked ASAP and ill get back to you guys thank you

2

Carburetor, Intake, and Exhaust / Starting issues

« on: August 14, 2014, 01:39:02 PM »

I tore it apart yesterday and checked all the connections and they are all good and is getting plenty of spark idk what the air screws are suppose to be at on the carb with the jetting it has but does anyone know how to check to see if the stator is bad or know how to check it? And the reeds on it are also good been trying to have someone who knows what there doing to come look but can't find anyone and don't have the money to take it to a shop just want to ride the quad before winter comes around miss riding lol any help would be great thanks

3

Carburetor, Intake, and Exhaust / Starting issues

« on: August 06, 2014, 08:30:11 PM »

It has a 45 pilot jet in it and a 162 main jet in it and I turn the gas off and it still does the same thing could have to do with the slider adjustment ? The needle position is in the center my dad thinks it has to do with the twist throttle and cable possibly? But does anyone know what the readings should be for the stator so we can test it and see if it's bad or not ? Any help would be great thanks

4

Carburetor, Intake, and Exhaust / Starting issues

« on: August 03, 2014, 08:40:49 PM »

Yea everything is oem it never use to get spark at first but put a new wire harness on and got plenty of spark but seems to be getting to much fuel

5

Carburetor, Intake, and Exhaust / Starting issues

« on: August 03, 2014, 11:35:13 AM »

Yea it seems like it's getting to much fuel and spits out the front of the exhaust flange can never keep it running for more than 3 mins tops and as soon as you let off the gas it stalls out

6

Carburetor, Intake, and Exhaust / Starting issues

« on: August 03, 2014, 10:06:51 AM »

Idk what jets are in now but I'm guessing close to the extra set I have but I have a 162 main jet and a 45 pilot jet and I haven't checked the float level yet but idk how to set those without messing it up if its not leveled

7

Carburetor, Intake, and Exhaust / Starting issues

« on: August 03, 2014, 09:27:40 AM »

All wires and connections are good and not corroded just rebuilt it from ground up and it seems like it's getting to much fuel cuz it's spitting gas out the exhaust flange in the front and i always have to have the throttle kinda turned to keep it running could it have to do with my throttle not being right? I have a twist throttle on it

8

Carburetor, Intake, and Exhaust / Starting issues

« on: August 03, 2014, 12:46:06 AM »

Hi I have a 86 trx250r that has a airstriker carb on it that was done by bdt motorsports I've had a problem with it starting running I've tried setting all the needle pin settings and never stays running as soon as I give it has it Boggs out also tried switching to the stock carb and did the same thing if any help would be great thanks Dustin

9

FAQ's, How-To Guides & Useful Information / 86 trx250r running issue

« on: June 11, 2014, 12:20:45 PM »

Sorry about the confusion that was just when I first bought it and cleaned it and it would do the same with a stock carb as well it's getting plenty of gas and spark plug is getting soaked but doesn't want to stay running tried jetting and setting the needle clip and no difference it just keeps flooding itself out and idk what the air striker carbs are suppose to be set at for a stock 250r

10

FAQ's, How-To Guides & Useful Information / 86 trx250r running issue

« on: June 11, 2014, 02:23:31 AM »

i have an 86 250r i recently just rebuilt since last year it only ran once and after i cleaned ithe bike it wouldnt want to run and barely had spark so i thought it was the carb and got an airstriker carb from bdt motorsports and still didnt run but since a couple days ago i used the other wiring harness i had and the switch cuz it was newer and got alot of spark but still doesnt run all it does is idle until you give it gas and it floods itself out was gonna have someone else look at it but want to see if its an easy fix first any help would be great  THANKS DUSTIN

11

Other ATV's / 86 gusset kit

« on: May 04, 2014, 08:15:50 PM »

What is the best place want it done right and not get messed up that's the only problem I have ppl that weld but want someone who knows hat there doing and you guys know what they charge for welding the gusset on by chance?

12

Other ATV's / 86 gusset kit

« on: May 03, 2014, 11:12:09 PM »

Hi I just bought a 86 complete gusset kit from pumasshine was wondering if anyone could knew where somewhere close that does welding really good on the gusset kits any help would be great thanks dustin

13

Wanted / 86 trx250r frame and swingarm

« on: April 09, 2014, 02:07:42 AM »

i am currently new at this site and i am currently looking for a 86 frame and swingarm i am looking for a straight frame and one that hasn't had any repairs cuz i got ripped off from a guy i bought one from and it was all bent and repaired so hoping i dont run into that again im new at this stuff and its my first time tearing it down to the frame so hoping i can get some help. thanks Dustin