See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: 2020 Winchester 250r meet up.
the count me in
February 13, 2020, 11:46:01 PM |
2 |
|
Re: Who are you close to?
30 min to taylor honda 1 hr to LED 1 hr 15 min to Full bore and thats all i know, but if your in the area go to taylor Honda its in woodburn oregon. i have come to them with some weird parts and they always know exactly where they are and they always have them. like throttle pivot bushings and they had them and knew where they were. also they were relatively cheap. February 14, 2020, 11:36:26 PM |
1 |
|
my R
had this thing for about 6 months now and ive ridden it once due to trying to do a restoration on it but then got a powder coating gun and had to do it all over again. then broke the drain plug hole. then had to rebuild the motor. needed the cylinder bored new piston new hot rods crank, complete hinson cr125 clutch, repair the broken cases and then put it together, LED is doing all of this. but i dont have the motor back yet. and im sure im forgetting something. but i powder coated the front end red and black. i have officially named this bike Satan because the only time ive ridden it was the day before my foot surgery and i fell off and ran over my feet. and also this 1500 dollar rebuild that i will have to run race gas in.
February 17, 2020, 12:32:06 PM |
1 |
|
Re: my R
the reason i call it satan is because it because it is a pain, every time i go to work on it something else breaks and its just generally being a pain. and The Norm expect to see this bike at the winchester bay ride in august.
February 17, 2020, 10:41:03 PM |
1 |
|
Re: how to paint cylinder
i think you might be missing something to ride it starts with c and ends with hain.
February 20, 2020, 10:29:18 PM |
1 |
|
Re: 2020 Winchester 250r meet up.
i wanted to go super bad but i have to go with a parent to be legal(even though i am over decible level, no spark arrester and will be wearing a super old helmet.) and they were confused why i wanted to go ride with a bunch of people i dont know, never seen them in my life and ride my pos with them. i did eventually convince them to let me go. it took months of convincing them to even let me keep my 250r with me paying for it the gas/oil and finding a way to keep it out of the shop taking up room.
February 24, 2020, 03:02:57 PM |
1 |
|
Re: Bell moto 5
computers being stupid and so here is the helmet that i havent restored yet so its still the same way that my dad left it 20 years ago
March 06, 2020, 10:11:45 PM |
1 |
|
Re: New from PNW
lookin alot like mine
March 08, 2020, 07:39:13 PM |
1 |
|
nobody needs this top end price chart
nobody needs this or wants it but here you go. i was bored. its a comparis on in pricing on all LED ESR and CT topends from 300cc to 330.the bottom section is just for fun you might not want to mix and match different makers pipes for the most power. i wanted to make a list of this for anyone who is buying a BB top end and just for simplicity sake i did this. Big bore engine ideas ideal Esr 330 pv with ESR pipe: $1317 Esr 310 pv kit with ESR pipe” $1430 ESr 310 c.e.o pv with ESR pipe :$1447 LED 300 with LED pipe: $1816 CT 310 with Ct pipe :$ 2025 Ct 330 with inspection and Ct pipe: $2925 With different pipes Esr 330pv with LED or CT pipe : $1545, $1405 Esr 310 pv kit with ESR or with Ct pipe and LED” $1430 originally,$1518 CT $2125 LED ESR 310 CEO pv with LED pipe:$1675, $1535 LED 300 with ESR or CT pipe: $1588, $1677 CT 310 (get rid of pipe) get LED or ESR: $2170, $1937 CT 330 (get rid of pipe )get LED or ESR: $3065,$2837 April 04, 2020, 04:16:41 AM |
1 |
|
Re: Haven't seen your R's
Just got my motor put together without anything in it it is just a skeleton
April 12, 2020, 12:44:21 AM |
1 |
