TRX250R.ORG
General => Projects => Topic started by: jamieg45 on August 04, 2013, 01:48:46 PM
-
Ok all here is my long term walsh build, here is how she sits now.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0221_zpse8ca6cfd.jpg)(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0222_zpsd5b15b7f.jpg)(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0223_zps89ac94f8.jpg)(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0224_zps3805ee95.jpg)
Ok no pipe rite now it is being cut and re angled to fit the cr500 suspension set up, a great member on here is doing it for me only because he has had to do it to many of his own and a few other members pipes too.
What I actually have left to do is get the shocks set up for my weight, a +2+1 chrome stem and a fat bar clamp, graphics kit, seat cover, tires for the front dwt rock out rims, rear tires and dwt beadlocks, fwc scooped hood, and a few other things I am pry forgetting.
-
Wut cylinder is that Jamie?
-
Sick Walsh,that blue and orange looks really good!!
-
Which pipe you running that is interfering with the CR500 setup?
-
Which pipe you running that is interfering with the CR500 setup?
I am running a lrd team b pipe.
-
Jamie I have your old set of laeger a-arms, I thought the orange looked like a pretty cool colour. Whoever does your powder sure puts on a thick coat as it took a bit of blasting to get it off.
-
Cool man thanks, you didn't want to keep them florescent orange for your ride. Lol
-
Thanksall you guys, my R's are my sweet calming ordeal and I put all into them when I build them.
-
Thanks Jon, since my computer is down, all I got new cv4 blue hoses and a greasable esr blue kicker for a good price.
-
Well I was informed yesterday that my pipe is on its way, finally. So I will be updating my progress and pics for you all, I now need a chain for it and set the front end and check all nuts and bolts and fluids and I can start he'd up.
-
Well I have got a little more done on the Walsh thus week and some today, got the chrommolly rear rotor guard powdered yesterday at work. We do all black powder, I wanted it blue to match the frame but for free who's gonna complain and its gonna get rubbed on a lot since its the closest to the ground. And today I got the new bolts for the swingarm pinch point, now I need to vet the money for the new throttle cable, front tires and a chain. Theset the front end nd ride height and its on, hopefully soon troy and can get on the graphics and then I can order my seat cover also. Then save up to get the shocks set up for me and a new +2+1 stem. Ow yah its finally getting close now.
-
Nice Quad I Like It because it looks light not alot of extra crap... I'm gonna start me a long term build here pretty soon.. where do youall get the graphics kits from can you custom make to sell
-
Talk to troybilt he is doing them for me
-
Thanks Opel and goon, its slowly getting there.
-
Super nice build. How wide are those arms? Is that pretty much the same geometry as a narrow Laeger?
-
I don't remember the measurements on the arms and yes its pretty much the same as a laeger. But if I want to shorten it a inch on the coward to back is flip flop the spacers on the frame and for the bottom shock mount.
-
Well I have one some work to her lately guys, I will post pics of the stuff I have done. New rear rims, bled he front brakes, new pinch bolts for the swinger and a couple of other little things.
-
Sweet looking build
-
Sweet looking build
Thanks man, I appreciate the nice comments and just wish I had the money to drop and have it all done like I see others get too. But its getting there slowly.
-
Just been checking your build out, real nice! Makes mine look like a junkyard dog lol. Any chance you could take a pic for me so I can see how you routed the rear shock resi line? Also where did you get the clamp from?
-
Thanks Vroomy, I will get some pics posted of the rear ressi mount today for yah man and I am gonna take some pics and post of the cr500link and make sure all iIis rite and I am asking if a certain bolt takes a nut and which style.
-
Ok I did some work today on the R, not a whole lot but some. I rerouted the front shock ressis because the hoses were bent to much and I found a better way to run them to my clamps. I got the rear wheels on and the axle nuts tight with new clips, checked some bolts and anti seized some stainless bolts so they wont cross thread.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0337_zps6220f2e7.jpg)
Here is the newly powdered brake rotor guard installed.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0338_zpse987f947.jpg)
I also did some polishing too
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0331_zps370c4a96.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0332_zps407c2524.jpg)
-
Just been checking your build out, real nice! Makes mine look like a junkyard dog lol. Any chance you could take a pic for me so I can see how you routed the rear shock resi line? Also where did you get the clamp from?
Here is the pics of how I routed the rear shock ressi and line, you asked for bud.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0328_zps1dce06e4.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0327_zpsc85cd129.jpg)
Hope this helps man
-
Some more pics
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0279_zpsf73f1c8c.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0278_zpsbb363e51.jpg)
I got good news today, the pipe is actually on its way. He said that he messed up my zip and they never shipped it out, he said it went today though. Now all I have left to do is buy a chain, graphics from troy, new throttle cable, front tires, set the front end and ride height set up, and I will be able to atleast ride it around the yard. Then save up for a fwc seat cover, get the shocks set up for my weight, a +2+1 chrome stem and a fat bar clamp, asv levers, new rear tires.
-
Jamie just get this thing ride ready, then add on the little details as you can! We dont all have years of parts like Marc did to make a perfect build. Pick away at it, but dont let this beaut just sit there! Shoot i stilll dont have my front mowhawks ive been "buying" for over a year now. Priorities man, come up and lets dune!
-
I hear yah man, that's why I said I need the new throttle cable, chain, and front tires and she's ride ready.
-
Lookin good man! Getting real close now.
-
Here you go red, she is all dressed up and almost ready for a ride man.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/IMAG0346_zps8286ddfc.jpg)
-
Well my pipe showed up today from mu buddy Joe H. ( sj281 ) he cut and redid my pipe so it will fit on the cr500 walsh frame. I got that sealed up and installed, and I also got the new throttle cable installed too. No I am just waiting for my esr cool head for the pro-x and I will be getting a chain and front tires to get this young lady ridable very soon. Here is some pics for you all.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0457_zpse4ec6f1c.jpg)
I just tossed it on and checked fitment and to see what spacer I needed for the silencer, much better with a 3/4" spacer compared to about 5" before joe cut and reangled it. It fits beautifully now and is ready to be fired up.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0458_zpsb56eb68f.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0459_zpse8e6a299.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0460_zps405fab3b.jpg)
-
Sweet lookin bike man, you can't just rob the chain off your pink bike to go for a ride I'd be way I anxious
-
No I would if I could, I will get one soon, but the front end is loose still and I have to do my camber and caster and set ride height up also.
-
Thats a nice build the orange was a good choice with that blue.
-
Thats a nice build the orange was a good choice with that blue.
Thanks goon, ready for graphics and some other goodies.
-
Well my esr race gas dome will be here in a day or so, my blue esr head from my good buddy Jon (spiritaces) will be here by the end of the week. And my skid plate mounting hardware will be here in a few days also from works connections. I mite have tires real soon, a member that had bought some stickers from me is badly wanting my riken front radials I have and is gonna get me the maxxis razor cross fronts I want for the Walsh. Hopefully next week I can get the chain and then off to the race shop to set up the front end and ride height.
-
That blue head will look good with the rest of the blue. Did you have to have the pipe re-chromed then?
-
That blue head will look good with the rest of the blue. Did you have to have the pipe re-chromed then?
No I did not Jeremy, he tig welded it and it didn't even mess up the chrome on the pipe. I will take a pic of that tomorrow and post it up for all to see.
-
Looking good jamie.
-
Jeremy here is a pic of where he cut and tigged the pipe back together, it didn't hurt the chromeor nickel if that what it is at all.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0514_zps2d777e1e.jpg)
Well I tried to install my skid plate from walsh but the new clamps from worksconnection and the pre-drilled hole from walsh aren't out far enough to do both sides so I will address that tomorrow. Here is some pics of it though with a few clamps just holding it up there the best they can. And I also talkedto Pro Armor today about the buckles and they aresending them to me fro free for the nets, which I never expected from them at all. So congrats to them and I appreciate it so very much.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0515_zps7dacc372.jpg)(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0516_zpsf62a6ffe.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0517_zps82a827d5.jpg)
And here is the new look with the short spacer compared to the way it was before it was cut and reangled.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0518_zps6c76600a.jpg?t=1378871527)
old way
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/100_1804.jpg)
So much better now
-
Looks good Jamie....that thing was way out of whack. I think that's the worst one I've ever seen. Good to go now.
-
Yah it was, the last pic is how it would of had to be without the cur and weld done so the stinger would be in the rear shock spring. Its all good now. It has just the rite clearance and no interference at all. Now I have to fix the skid plate issue, it never fails when you think or it all seems to be coming together something else has to have a issue or a bump in the road.
-
Well through the terrible day I had with my truck and having no brakes because of a brake line hole in it. My new to me ESR blue cool head came in and I got to install it while I was waiting on tools from my brother in law. I got the pro-x head off and installed new O-rings and I also installed the full race gas dome from esr (28cc), got the rest of the new coolant lines on along with the new ESR blue temp gauge too. Lets just say she runs and has some serious kick back now (wow) I cant wait for the cr ignition, well got it running and checked for leaks and got all of the air out of the coolant system and all was good no leaks at all. Now I need a chain and some money, thanks to the truck it took my money, but its just a little more important to drive than the quad is. Here is some pics and a vieo for you.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0544_zps61722c6c.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0545_zps97072e9c.jpg)
-
Thanks Jon I appreciate the help bud.
-
Well I didn't get to do anything to either quad today thanks to mother nature, been raining on and off all day so far.
-
Sounds good. Make sure to put the chain on if you are taking pics for QOTM, LMAO!!!!
-
Sounds good. Make sure to put the chain on if you are taking pics for QOTM, LMAO!!!!
Thanks Tony, I will get a hold of contracthunter and see if he has a chain.
-
i have a chain.. JS
-
i have a chain.. JS
How much for the chain wayne, and what is JS mean. I never was good at abbreviations to understand.
-
How much for the chain wayne, and what is JS mean. I never was good at abbreviations to understand.
i was being sarcastic about having a chain... :)
JS = Just Sayin
-
i was being sarcastic about having a chain... :)
JS = Just Sayin
Sorry not so up to date on the abbreviations and man you got me all excited about a chain for my ride
-
[QUOT=danhung11;12402]I think I have a new chain and some billet rear LSR. What else you need?[/QUOTE]
Well i got the lsr hubs coming from troy, but what kind of chain, is it a oringed chain and how much you want bud.
-
Ok no problem man, ow well I will get one soon then from the local shop.
-
The builds on this site rock!
Nice man!
-
The builds on this site rock!
Nice man!
Thanks man, its getting closer to finish time, my graphics will be here soon. I just got my strap buckles in from proarmor today, I hope to be getting a chain this weekend and some other things taken care of too. Then I will figure out my seat cover, and order it and the scooped hood from fwc also. And save up for my levers and other goodies also. It never ends does it, but it is so much fun building them too.
-
I love seeing your Walsh come together. Very nice!
-
I love seeing your Walsh come together. Very nice!
Thanks man, I worked on it today some finally. I will have pics up tomorrow, I got the strap buckles on and got the skid plate re drilled and mounted up also. I also got the rear fender # backgrounds off with no sticky left on the plastic. I just need to clean up the plastic and get them ready for the new graphics that should be here onMonday or Tuesday. Getting really close to being done but not a 100% of what I want though.
-
Jamie, I have confirmation the graphics shipped Friday. FYI
-
Jamie, I have confirmation the graphics shipped Friday. FYI
How did they ship usps or ups. But sweet man, I cant wait to see them. Hey did you get my pm on the exhaust flange bud, and the hubs should be here on Tuesday is what it says on the fedex site tracking.
-
Here is what I got done yesterday, I will have more pics later today as I get more done and get ready for graphics to be installed.
Here is the nets wrapped around the frame with the buckles from Proarmor. ( they sent me these for free, which was very nice of them)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0579_zps66931f83.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0580_zpsd2b6d794.jpg)
Here is the skid plate mounted after drilling some new holes and so on for mounting.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0578_zps78d2073b.jpg)(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0577_zpsc65722ad.jpg)
-
When I get home I will have more pics from today's work, but I found a major problem though that is gonna be a major set back. The upper ball joints are toast and no longer available to get, but I am gonna see if a friend of mine can make all new ones for me. I'm gonna take the Walsh to him and leave it and see what he can come up with. So I can save money for now and start saving up for the new Walsh arms, since what I have are from the year 2000 and they are the first gen of the flatties. I will see what they will give me on there buy back program and use that towards the new ones along with my stem too.
Well time to watch some nascar and relax for a bit with my relatives and have dinner too.
-
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0589_zpsff3ab9fa.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0593_zps22729486.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0591_zpsf6ada62e.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0594_zps9a2c4b88.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0592_zps4731941b.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0590_zps1063ac9d.jpg)
-
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0597_zpsaf58fcb0.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0595_zps72317415.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0596_zps553c3a3a.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0598_zps95e2d186.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/LSR%20and%20Walsh%20R%20pictures/IMAG0599_zpsc7477227.jpg)And I got the grill from Tony installed on the hood for the pink lsr today also.
-
Looking good jamie. That matching hood grill and bumper grill looks cool and stands out as a match.
-
Looking good jamie. That matching hood grill and bumper grill looks cool and stands out as a match.
Well thank you and all the credit goes to Tony (Pumashine) the bumper was like that already from AC and tony made the hood grill to match. Well the walsh will soon have graphics on it, they just arrived today. Thank you so much Troy, they look awesome.
-
From a distance it looks like a spherical bearing could be fitted to your arms. They kind of look like a Gibson, which takes a com12.
-
Well I will be looking around and get it tore apart and get some measurements so I can see what I can use, if not I will try to find the correct ball joint and make them how walsh did.
-
Call Bob at Rod End Supply, I'm sure he can help you out with all the bearings, pins, and heims. I believe Walsh uses FK Rod Ends.
Thanks Dan, I will get one out and see if they can help me. Because what Walsh had done was buy ball joints and cut the threaded end off and then stick it in a lathe and cut the other part down to drop it in the arm.
-
Ok I got one side done today on the graphics, here are some pics of it so far.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0601_zps3ce5fff2.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0602_zps4a5e5b53.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/IMAG0603_zpse8089598.jpg)
let me know what yall think, I am not sure about a hood from fwc or not. I pry will get one.
-
Dont put a hood on it,as much as I like them,dont do it! Otherwise it looks good!
-
saweeeet
-
Looks great don't put the hood on it though.
-
Nice!!!
-
Looks great Jamie!
-
I'm still thinking a hood, not just positive yet. I mite have to take the one off the lsr and see what I think, And I got some more pics too.
-
Here goes some more pics from in the trailer, I will get some outside tomorrow.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/IMAG0618_zps97799def.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/IMAG0619_zps07f7c648.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/IMAG0620_zpse43acaea.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/IMAG0612_zps9a4e1457.jpg) I think the hood will look really good with this on it when its on the quad and the plastic.
-
That cool man, to each is there own.
-
Pics of here rideable now.
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/20131008_155500_zpscb8591d6.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/20131008_155511_zps05f010ff.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/20131008_155515_zpsb6f4a96c.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/20131008_155523_zps2bebc083.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/20131008_155530_zps1e0492b1.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Walsh%20build/20131008_155536_zps4df96465.jpg)
-
Looks good man! When you going to go beat on her?
-
Soon as possible, well as soon as I can come up with money for race gas to ride for a day. I am out after I put what I had left in this one and the lsr too, and I am gonna do some fine tuning on the front end as well.
-
Damn that thing looks nice man...good job on the build. Everything looks good on it! Lets see some action pics!
-
Damn that thing looks nice man...good job on the build. Everything looks good on it! Lets see some action pics!
I will post some action pics if someone goes with me to take pics when I ride it. Rite now its hunting season and meat in the freezer is on my mind.
-
Very nice Jamie! Top notch builds sir!
-
Very nice Jamie! Top notch builds sir!
Thanks sam and no need for the sir, I'm not that old man. I'm close to 40 but still no need for the sir.
-
Sweet ride jamie, well done.
-
Sweet ride jamie, well done.
Thanks man and I wish it was completely done the way I want it too.
-
Really nice build!! Don't see any people doing the Walsh and that makes it so much sweeter.
-
Really nice build!! Don't see any people doing the Walsh and that makes it so much sweeter.
Yah I don't think there are that many of them out there to tell you the truth.
-
Your graffics kit turned out cool jamie.
-
your walsh is so cool, thats me being serious too. Now if you could be up to par with the quad, we would be good LOL. Thing is looking great and to think its only taken the whole time I've known ya to get there. Cant wait to ride it
And you will get to ride it and the lsr too bud. And I get to ride yours bro.
-
And you will get to ride it and the lsr too bud. And I get to ride yours bro.
You two trying to start a thread called "quad swap"?
-
You two trying to start a thread called "quad swap"?
You can ride them too Scott don't be jealous bud, its not a harley that no one can touch or ride bud.
-
You can ride them too Scott don't be jealous bud, its not a harley that no one can touch or ride bud.
That's very generous of ya. I'd let ya ride mine depending on what I have running at the time, but I don't think it would be worthy. Maybe it would just make you appreciate your quads that much more!
-
That's very generous of ya. I'd let ya ride mine depending on what I have running at the time, but I don't think it would be worthy. Maybe it would just make you appreciate your quads that much more!
It don't matter bud, I'll ride it and throw some dirt with it. A R is a R and it don't have nothing to do with looks and all that, mine took me a long time to get where I'm at at this moment. You will get there for what you want some day too, it takes time and money bud.
-
Well I have got some more goodies for the walsh, a new bar pad some odi grips and a cr ignition. I have checked the compression on it the other day to help a friend who has almost the exact same motor and all and I got 245psi. She kicks a little hard to now, I just need to get the money up for the esr adapter plate. I need to figure out my FW seatcover design I want and then get the money up for the shock ls to be done and a +2+1 chrome walsh stem. And a new set of 3/2 dwt rockout front wheels and some tires too. I will get some pics posted with the new bar pad when I can.
-
Thanks for posting the pics for me Jon. Hopefully I will have internet again soon.
-
Got the new ball joints installed from jerry white at white chassis ( thanks man, much appreciated). And I also got the 01 cr 250 ignition installed and the motor runs with it too.
-
Great looking bike so far!!
-
(http://img.tapatalk.com/d/14/04/02/ba7ejyhe.jpg)
(http://img.tapatalk.com/d/14/04/02/e7y2e8eb.jpg)
Sent from my SPH-L900 using Tapatalk
-
Ok all I'm asking for some advice, my rad shrouds. Should I leave them clean or put some sponsor stickers on them.
(http://img.tapatalk.com/d/14/04/15/pumu6azu.jpg)
(http://img.tapatalk.com/d/14/04/15/zyranypa.jpg)
Sent from my SPH-L900 using Tapatalk
-
Stickers but don't over do it. IMHO
-
+1 for stickers but like he said don't over do it.
-
Yah that's what I was thinking to, like my outwear stickers, hinson, and maybe rpm or vp race fuel ones. I'm gonna get it all figured out, she is all ready to go to the dealership who sponsors me for there open house this week.
-
Sounds good. I would maybe put 2 on the horizontal part and then one on the vertical part.
-
Yah i will use some tape and stick some on for seeing which ones and if i like them. I will post pics before i stick any on for real.
-
Here is how she sits before I left for work today. All cleaned up and ready to go sit in North End Cycles showroom for there open house. They are a sponsor of mine and asked if I could bring one of them for 3 days.
I'm ready for some better and warmer weather to stay so I can go hit the track with her now.
(http://img.tapatalk.com/d/14/04/16/ahy9etu6.jpg)
Sent from my SPH-L900 using Tapatalk
-
Sponsors are important. That being said I like the sano look.
-
Ok I went and put these stickers on the shrouds after work. What do you all think.(http://img.tapatalk.com/d/14/04/16/hygasusa.jpg)
Sent from my SPH-L900 using Tapatalk
-
Looks good Jamie.
-
Thanks zack much appreciated bud, now loading her up and heading to the dealership with her
-
very nice machine. as all yourr quads are. even your tool box is bad ass.lol
john
-
Thanks guys for all the compliments
-
all the kids at the dealer are going to be "whats that?" haha it will be like a old muscle car in a new car showroom
-
^^^ exactly. It'll be the best looking thing there.
-
Yah it already is the best looking toy they have there in the show room, the owner himself and the parts manager and the head mechanic was all like man that is so awesome looking. They are gonna be hooking me up with a great deal on a precision stabile for the walsh and some other parts as well. And I get a real good deal from them on vp 110 now as well too. I can't wait to start racing again now.
-
Build looks great Jamie! Well.. except for the angled ITP sticker that makes my OCD alarm go off! :lol:
-
Build looks great Jamie! Well.. except for the angled ITP sticker that makes my OCD alarm go off! :lol:
Yah that was the only way to put any of the stickers I had there because of the quick disconnect screw. I'm good with it, it's a mx bike not a show piece, lol. Even though I've knkw it looks like a show quad but that's how I like my quads to look.
-
Build looks great Jamie! Well.. except for the angled ITP sticker that makes my OCD alarm go off! :lol:
I agree!
-
It's good enough for me, sorry I can't please everyone.
-
Well I'm happy with, so that's all that matters
-
(http://img.tapatalk.com/d/14/04/29/guta8ejy.jpg)
Ok this was at ride height to set up the front end, and after a few adjustments on the shocks she sits real close to that with me on it as well.
(http://img.tapatalk.com/d/14/04/29/y9yme8e7.jpg)
I had to add 2 more stickers to the plastics, I forgot a sponsor who has been there for me for a very long time. Chad and Bill Reed have helped me out alot and I do as much help as I can at Redbud when he is racing. (Chad is a pro racer, but had to take this year off after a bad crash after nationals were over down in Texas at Caleb Moores tribute race)
(http://img.tapatalk.com/d/14/04/29/ru7a9ugy.jpg)
Here is how she sits now ready to hit the track for some much awaited seat time. I need front shock covers and a set of 4/1 front dot rock out wheels and Maxxis razors. She is too wide with the 3/2 on her rite now.(http://img.tapatalk.com/d/14/04/29/yjane8ad.jpg)
Sent from my SPH-L900 using Tapatalk
-
Lookin' good Jamie.
-
Thanks jeremy