TRX250R.ORG
Workshop => The Mad Scientist => Topic started by: croat1 on September 02, 2018, 07:59:14 PM
-
another project being worked on by Sonny Fricia and Dave Moore
-
I think it should work well
-
Nice looking piece.
-
looks nice. what are the benefits?
-
looks nice. what are the benefits?
Better fitment for those using ESR cylinder. Maybe ESR cylinder versions have different intake angles but one comparison against a PRO-X showed 1* difference. Seems like some people have no issue while others do have a problematic carb & air filter fitment.
-
I think it should work well
Looks like it'll fit well. I've heard some concerns over the added length causing lower signal to carb since it's moved back further relative to other intakes like stock, UPP, etc.
-
I think it should work well
Looks like it'll fit well. I've heard some concerns over the added length causing lower signal to carb since it's moved back further relative to other intakes like stock, UPP, etc.
Going back to what Jerry Hall said before the site change I wonder about carb bowl vibrations with this style of intake.
-
Going back to what Jerry Hall said before the site change I wonder about carb bowl vibrations with this style of intake.
The black rubber boot hopefully provides enough insulation
-
Should have a bit more than a rad valve I would think
-
is there a picture of the angle difference of it mounted on a cylinder?
-
one pic
-
Looks like a lot of clearance gained.
-
is this ready for purchase?
-
Purchasing info...
-
Thanks joe! I wish to purchase one but do not have facebook? any other way to get an order placed?
Thank you,
John
-
all the fuss with this here's what happens with carb alignment with an OEM frame. when I was assembling my led esr 363 here's what it looked like. I put together a mock up of a 30 degree intake and was ready to send it out to be fabricated at the same time I was posting on this problem sonny replied that he would look into this. i'm glad he did as i'm sure his intake would be superior to what I was working on.
-
So you'll have to post up some good pics of when you get one Douglas
-
someone needs to order an extra and I will pay them for it. any volunteers?
-
i'm already buying 2 of them if you want to send me the $ I will order 1. still waiting on Sonny to post pre sale. that will be any day now probably today. i'm sure it will be 4-6 weeks till there ready for shipping. he said 175 plus 8 for shipping. it supposed to come unpolished with bolts clamps carb hose and gaskets. that's the last I know
-
i'm already buying 2 of them if you want to send me the $ I will order 1. still waiting on Sonny to post pre sale. that will be any day now probably today. i'm sure it will be 4-6 weeks till there ready for shipping. he said 175 plus 8 for shipping. it supposed to come unpolished with bolts clamps carb hose and gaskets. that's the last I know
Doug, that would be greatly appreciated. Can I send you the funds, via Paypal?
-
Mounted up by Dave Moore
-
i'm already buying 2 of them if you want to send me the $ I will order 1. still waiting on Sonny to post pre sale. that will be any day now probably today. i'm sure it will be 4-6 weeks till there ready for shipping. he said 175 plus 8 for shipping. it supposed to come unpolished with bolts clamps carb hose and gaskets. that's the last I know
Doug, that would be greatly appreciated. Can I send you the funds, via Paypal?
ok my email is my63wildcat@msn.com douglas hoyt 978-855-0886 I am ordering them now
-
i'm already buying 2 of them if you want to send me the $ I will order 1. still waiting on Sonny to post pre sale. that will be any day now probably today. i'm sure it will be 4-6 weeks till there ready for shipping. he said 175 plus 8 for shipping. it supposed to come unpolished with bolts clamps carb hose and gaskets. that's the last I know
Doug, that would be greatly appreciated. Can I send you the funds, via Paypal?
ok my email is my63wildcat@msn.com douglas hoyt 978-855-0886 I am ordering them now
all paid for I ordered you 1
-
Sonny should be joining up soon...
-
Dana tracked me down. If anybody ever needs to get in touch with me, feel free to message me here, my email, or good ol' Facebook. Glad to be helping all of you keep the R alive.
Thanks for helping out Doug, appreciate it.
You're alright too Dana ::)
-
Dana tracked me down. If anybody ever needs to get in touch with me, feel free to message me here, my email, or good ol' Facebook. Glad to be helping all of you keep the R alive.
Thanks for helping out Doug, appreciate it.
You're alright too Dana :Dana tracked me down. If anybody ever needs to get in touch with me, feel free to message me here, my email, or good ol' Facebook. Glad to be helping all of you keep the R alive.
Thanks for helping out Doug, appreciate it.
You're alright too Dana ::)
Thanks for all your hard work Sonny!!! And Dave Moore and Bubba Ramsey
Joe
-
i'm already buying 2 of them if you want to send me the $ I will order 1. still waiting on Sonny to post pre sale. that will be any day now probably today. i'm sure it will be 4-6 weeks till there ready for shipping. he said 175 plus 8 for shipping. it supposed to come unpolished with bolts clamps carb hose and gaskets. that's the last I know
Doug, that would be greatly appreciated. Can I send you the funds, via Paypal?
well now sonny's joined the group any parts you can get from him now. but I still paid for 1 for you. remember will need that up front this is a pre pay . thank you
-
i'm already buying 2 of them if you want to send me the $ I will order 1. still waiting on Sonny to post pre sale. that will be any day now probably today. i'm sure it will be 4-6 weeks till there ready for shipping. he said 175 plus 8 for shipping. it supposed to come unpolished with bolts clamps carb hose and gaskets. that's the last I know
Doug, that would be greatly appreciated. Can I send you the funds, via Paypal?
well now sonny's joined the group any parts you can get from him now. but I still paid for 1 for you. remember will need that up front this is a pre pay . thank you
Thanks Doug. Sending you funds now.
John
-
i'm already buying 2 of them if you want to send me the $ I will order 1. still waiting on Sonny to post pre sale. that will be any day now probably today. i'm sure it will be 4-6 weeks till there ready for shipping. he said 175 plus 8 for shipping. it supposed to come unpolished with bolts clamps carb hose and gaskets. that's the last I know
Doug, that would be greatly appreciated. Can I send you the funds, via Paypal?
well now sonny's joined the group any parts you can get from him now. but I still paid for 1 for you. remember will need that up front this is a pre pay . thank you
Thanks Doug. Sending you funds now.
John
got it now we wait.
-
Thanks Doug.
-
has production began on these yet?
John
-
Beginning of next week after I finish the stator covers that were ordered.
-
DG made one similar back in the day.I think they were cast.I have 2 DG and 2 others for the aircooled 250r .
-
any updates?
-
sonny did not like the way the first one came out. he"s made some changes to the inside of the intake for better flow.
-
sonny did not like the way the first one came out. he"s made some changes to the inside of the intake for better flow.
I wonder if he is working with troy for CFD analysis???
-
when will these be ready?
-
I sent sonny a message on the progress and if he sent arlen 1 to try out. he said arlen never replied. sonny did not give me any time line.
-
sonny has completed the design and they have been tested. he is currently finishing the intakes.
-
sonny frica has finnished his intakes. they should be shipped in a week.
-
any info from arlen on this?
-
sonny said he tried to contact arlen but he did not reply.
-
here they are
-
Did they fix your carb fitment issue?
-
alignment is much better. still cannot use spacer plate
-
alignment is much better. still cannot use spacer plate
That's at least a positive for your build. Post up a pic when you get a chance, love seeing pics of that build!
-
What reed block are you using? I was able to fit a .550" reed block safety in a stock chassis.
-
Hello sonny do you currently have any stator covers or are you taking orders for them?im not too familiar with your products,what else do you make for the 250r ?
-
Yes, I am taking orders on them. I have a lot of blanks machined, but I am waiting to finish a couple other jobs before I send them all out to anodize. I used to anodize myself, but I just don't have the time any more.
As far as other things I make, I make the stator covers, water pump covers, miniature stator cover keychains these intakes, front and rear fuel tank mounts, and I am currently working on wheel hubs, a brake lever, and maybe radiator mounts. Haven't decided on that yet.
-
Would you mind to pm a price list for your items and how to order/purchase them.Im not on FB.Thank you.
-
Same here with no facebook.....
Would like to check out a keychain, and see your other parts.
Thanks
-
^^Agreed with others Sonny.
Please give buying options for the non-Book of Faces people. Thank you.
-
I don't mind doing it, but I do not want to break the rules of the forum either as I am not a paying advertiser. I'll post pictures of the stuff I make, but I'll have to message folks privately for pricing.
If that too is against the rules, please tell me admin.