Topics

1

Pics and Vids / Riding video from the summer on my project250r

« on: January 10, 2014, 12:36:07 PM »

Check out a video of myself riding my "project250r" also follow me on youtube! for more 250r videos

-----------> Bill Vogt - YouTube <-----------

-----------> http://www.facebook.com/project250r <-----------



[video=youtube;C8Cae_I9IvU]http://youtu.be/C8Cae_I9IvU[/video]

2

Pics and Vids / My Project 250R Build Pics and Mod list

« on: January 10, 2014, 12:28:00 PM »

It's amazing how some people don't know what these are....
This frame and pile of parts was found on craigslist, at a storage facility. They had it sitting outside in a pile...
I consider this "rescued" as it was going to be thrown away...

We went through and did a complete restoration... See the following pics :-)

This just shows what you can do with a 1986 frame.


All Products are Items that i sell through my store , We are an ESR dealer also.

Everything was powder coated , repaired, modified and built in-house @ BVC Racing / Project250r

Here is a list of Products we added to this bare frame that we started with:

ENGINE

    ESR 310 Cylinder kit
    ESR TRX7 pipe
    ESR "new" Silencer
    ESR exhaust flange
    ESR Base spacer
    Hot rod "long rod" Crank
    Hot Rod crank bearings/seals
    Boyesen Reeds
    Keihin A/S 38mm Carb
    UPP Oversize intake boot
    Vesrah Clutch plates
    UNI air filter
    Outerwear

CHASSIS - SUSPENSION - COSMETIC

    LSR axcalibar pro Axle
    LSR dual row carrier
    LSR Antifade
    LSR steering stem
    Galfer wave rotor
    Cannondale "moto" A-arms
    Cannondale Spindles/calipers/hubs/brakes
    Elka stage 3 front shocks
    AC Racing bumper
    AC Racing YFZ450 pro peg nerfs
    DG Grab bar
    Factory Effex Seat Cover
    TM DESIGNS CHAIN SLIDER
    MOOSE CHAIN BUFFER/PAD
    TRX450R SHIFTER
    MAIER oem style front/rear plastic
    MAIER scoop hood
    MAIER tank cover
    PRO TAPER handle bars
    PRO TAPER grips
    MAXXIS RZR tires
    ITP front wheels
    400EX Rear wheels (powder coated)
    Regina GOLD Chain
    Project250r OEM replica graphics
    CRF450R Front brake master cylinder
    CRF450R / WC Red MC cover
    Aluminum Air Scoops (ebay)
    Billet exhaust hangers (ebay)
    Motion Pro Clutch cable
    Terry Cable Throttle cable
    Steel Braided rear brake line

POWDER COATING BY PROJECT250R.COM

    Frame
    Swingarm
    A-ARMS
    F Hubs
    R Hubs
    Engine Cases
    Engine Covers
    Wheels

MISC SEALS / GASKETS / REPAIR PCS

    K&L Rear MC Rebuild kit
    K&L Caliper Rebuild kit
    Cometic Gaskets
    K&S engine seals

FUEL - OIL - LUBES

    VP C-12
    Amsoil Dominator
    Bel-Ray Gear saver
    Bel-Ray Water Proof Grease
    Red Loc-Tite
    Engine Ice Coolant

3

Engine and Bottom End / Fmf, pro circuit vs other brands?

« on: September 10, 2013, 10:16:38 PM »

Hey guys been out of it for a few years

Our distributors have fmf and pc avail fast and cheap

Question is how do they compare to the sparks, duncan and esr that ive ran in the past??

I plan on running a 295 cyl or a esr310 kit

Mx riding

4

Pics and Vids / Some 250r vids and other vids

« on: August 31, 2013, 08:07:55 PM »

Hey guys figured I'd post this.  I'm sure some remember these vids from the old site.

Here is my last 250r I had in 2006.  Was a lonestar no link chassis

http://youtu.be/bx3Opr2q2ek


http://youtu.be/U-1WAuvtCLk



Here's recent of my cdale.  Loved riding it time to go  back to Honda!

http://youtu.be/BIm3WiBXaoA

Some vids riding my 2011 crf450. I am at beginning of video #16

http://youtu.be/7J5iwi3a6lY

5

Projects / Building another 250r....has been a few years!

« on: August 31, 2013, 07:53:23 PM »

Well guys.  Has been since 2006-ish since I last built a trx250r ( I have built and owned over 10)

Time has come for me.   After messing with cdales for the last year I plan on getting back to my roots.  After selling .net I got out of it, and really do miss it!!!

I will post build progress on this post as I get parts together

I will be using a lot of my cdale parts ( elkas, front end, rims tires....) on this build.   It's crazy how much of a copy the cannondale moto was to a trx250r.  At least in the front end design.

 I am hoping to use my 86 frame that I've had kickin around.

Want to find or make a no link swingarm.  I am going to run the 15.5" no link Elka that I have

As for the motor .... I still have tons of parts kicking around.  I picked up a set of mint cases.  Going to start there :-)

I will also be powder coating every piece of this quad in house.

Will have pics soon!

6

Wanted / No link swingarm for Oem frame

« on: August 31, 2013, 07:45:09 PM »

Looking for a no link swingarm that fits Oem frame

I have a 15.5" Elka to use on it

I think roll and LSr built some for this?

7

Project 250R / Facebook link

« on: July 22, 2013, 08:13:50 PM »

Be sure to " like" us on face book.  It usually gets updated every few days with current deals and projects!


http://Http://www.facebook.com/bvcracingllc

My personal page! Add me! Updated every day

http://Http://www.facebook.com/bvcracing

8

Project 250R / Best way to contact bvc racing

« on: July 22, 2013, 08:08:58 PM »

Open 7am to 6pm mon-friday eastern
9am to 4pm saturday
Closed sunday

We extended our hours this summer due to the phone ringing non stop! Trying to reach as many as we can

Phone: 518 563 3699

Email.  Bvcracing@gmail.com

My wife samantha runs our parts department, if you call you will get her on the phone.
She is very knowledgable and takes care of hundreds of orders every week.  

If you have a tech question please email me and i will reply as fast as i can

9

Project 250R / We made it!!

« on: July 22, 2013, 07:57:38 PM »

Hows it going guys??

We are happy to be on here! This site looks great!