Messages

1

Suspension and Chassis / Re: Crf450 rear master cylinder

« on: April 19, 2022, 06:38:20 PM »

Mike's custom machine is who I had make that bracket in the above pic. Easy swap after that. They are a pain to bleed tho. Mike also made me a threaded washer that goes on plunger so you can have a return spring that's self contained.

2

Duner / Re: Little Sahara Oklahoma 2021

« on: October 01, 2021, 10:48:01 AM »

Really great week so far!
Not only did I get to see Joe again after a few years from silverlake, I got to camp next to him and Graham all week!
Thanks my friend.

3

Suspension and Chassis / Re: 04-05 450r rear master cylinder

« on: June 12, 2020, 11:17:01 PM »

On the 250r the threads to mount the master are on the frame.
On a 450 it is on tje master cylinder. Therfore you need to remove tje threads so you can bolt it properly on the frame,, don't need 2 set of threads. Hope that makes sense.

4

Suspension and Chassis / Re: 04-05 450r rear master cylinder

« on: June 07, 2020, 10:23:55 PM »

All 450r master are the same.
All you need to do is drill out the threads on the master.
If you need a 250r plunger I believe I have one still.

5

Suspension and Chassis / Re: Integrated Reservoir

« on: May 19, 2020, 11:40:19 AM »

Seen a couple on the facebook running them.
I personally use the crf master and had Mike's custom machine shop make a adapter. I believe he sells it on ebay now.

6

Duner / Re: 2020 Winchester 250r meet up.

« on: December 18, 2019, 10:29:59 PM »

I really want to make it, but think August isn't enough wallet prep time lol

7

Projects / Re: 86 Oregon R

« on: December 08, 2019, 08:55:49 PM »

Dang Joe! Now that's how you do it!

8

Duner / Re: 250R legends tour

« on: December 01, 2019, 03:28:40 PM »

!!!

9

Carburetor, Intake, and Exhaust / Re: Exhaust Hi Temp Foil

« on: November 19, 2019, 09:42:39 PM »

I used the aluminum back sound deadening for a couple years on one set of plastics. Held up good, kinda slide around a little.

10

TT/Flat Track / Re: Pine Lake Raceway

« on: July 10, 2019, 06:14:57 PM »

How far from that are you Joe?

11

Suspension and Chassis / Re: Heel Guards w/o Nerf Bars

« on: April 26, 2019, 10:48:57 PM »

Pm sent.

12

Suspension and Chassis / Re: Need some help with my cr500 linkage bolts.

« on: April 10, 2019, 10:18:38 PM »

Google isfracing, it might help. Otherwise messenger on fb is how I get ahold of Steve.

13

Duner / Re: Silverlake 2019

« on: January 29, 2019, 01:24:02 PM »

Looks like the Silverlake meet up this year is June 14-15.

Joe

You going this year Joe?

14

Suspension and Chassis / Re: 1986 250r front spindles ?????

« on: January 26, 2019, 11:03:01 AM »

[quote

😘 luv u babe
Happy belated birthday buddy!

15

Suspension and Chassis / Re: 1986 250r long travel setup?

« on: January 24, 2019, 10:13:53 PM »

I had Steve Buchinsky (ISF Racing) build me a tubular gullwing no link and I have a dc2 lsr both 88/89 length. Idk if I'd go any shorter. The difference in traction was really noticeable, unless it was a tt build.
Burns runs/ran a koq. Cracked the 1st one, haven't heard anyyhing on the 2nd one. I believe Michael88r? Had one an stuff wasn't lining up. Might do a search on the site here for it...