Messages

1

MX / Re: Pusheta Creek MX

« on: September 05, 2023, 08:39:32 AM »

Made my way out to this place again. Caught a couple of my better laps from the GoPro, enjoy.

https://m.youtube.com/watch?v=_xosFmC7lbI&pp=ygUScHVzaGV0YSBjcmVlayAyMDIz

2

MX / Re: TX MX national 2023

« on: April 25, 2023, 01:03:51 PM »

https://atvmotocross.com/2023/04/25/photo-gallery-underground-amateur

I see an R. Maybe atvmxr?

3

Suspension and Chassis / Re: Crf450 rear master cylinder

« on: April 19, 2022, 10:01:27 AM »

Here’s a picture without the pedal on I’ll get one later today with it on.

4

Suspension and Chassis / Re: Crf450 rear master cylinder

« on: April 19, 2022, 08:11:19 AM »

broken1, worth a shot thanks for the tip

Joe yes that is it. I wanted to get rid of the hose so I thought it would be pretty easily swapped out. Turning out to be the other way around lol.

5

Suspension and Chassis / Re: Crf450 rear master cylinder

« on: April 18, 2022, 08:00:08 PM »

Joe, bleeding it on the quad. Swingarm is relaxed without the shock on so it’s feeding it down to the caliper. I’m starting to think the pushrod is not long enough.

2ndmoto, I’ll check but I thought they were all the way in, thanks for the tip.

gentner8, I’m using something very similar hooked up to an air compressor. First time using it and it bled the fronts in less than a minute.

6

Suspension and Chassis / Crf450 rear master cylinder

« on: April 13, 2022, 03:51:44 PM »

I’m having trouble getting mine bled. It will not build pressure at all. New line, caliper rebuilt and brand new master cylinder. I’ve been wanting to use one to get rid of the hose and mounting to the air box. Has anyone who uses one had the same issue? Pedal throw too short? I didn’t see anything in a search on here. Thanks for any help.

7

MX / Re: Redbud

« on: January 13, 2022, 04:22:13 PM »

Sorry don’t come here much anymore unfortunately. Went 2-3 for third overall out of 12 in 2 stroke and 5-8 out of 18 in 30+. Hope all is well Joe!

8

MX / Re: Redbud

« on: August 05, 2021, 05:05:23 AM »

https://m.youtube.com/watch?v=92hUa49VWoY

9

MX / Pusheta Creek MX

« on: March 24, 2021, 04:37:37 AM »

This track is having a quad only day Saturday March 27th 11-5 if anyone is in the area and wants to ride. Track is located in Wapakoneta, OH.

https://pushetacreekmx.com/

10

MX / Grear’s MotorSports Park

« on: June 02, 2020, 12:43:26 PM »

Finally was able to get the R out this past weekend at a newer track in Zanesville, OH. If any one is interested in the surrounding area, they have quad only days and want more quads to come out so support those who support us. Overall good day. Messed with some compression settings and got my CCP stabilizer dialed in. Side note, looking at getting the LED intake. Has anyone come up with a Uni filter that will work on it instead of the K&N? I’ll have to get an airbox made also.

https://m.youtube.com/watch?v=rVCPu-HED1k

11

MX / SE Quads 7/28

« on: July 30, 2018, 07:50:20 PM »

Bummed I couldn't make it to Red Bud this year but met up with the SE Quads series at Daniel Boone over the weekend. First race of the year for me and first race with the cr ignition. Definitely like the cr better than stock, it suits my riding style a lot better.

Moto 1: Got the holeshot! Let go of the lead pretty quick though as I got a little wide and pinched myself out over the first jump. Held second the whole way out.

Moto 2: Terrible start and they watered hard pack making it really slick so I struggled in a couple corners finding traction. Caught and passed for second and held it the rest of the way.

There were only three in our class, Open C, but I had a great time watching the other races and getting back out there. This was the first race my dad has been to in a while and it was just like old times which made it all worth it. Had fun, R ran good, didn't break anything, good weekend. I'm definitely going to be working on my corner entry speed though. It is terrible. Corner exit is fine but entry needs work.

https://www.youtube.com/watch?v=rx18aJBjuvk

https://www.youtube.com/watch?v=IVSGnBCF4N0

12

MX / Re: Who’s still racing?

« on: April 05, 2018, 09:58:08 PM »

I'll be out there soon.  Waiting on shocks from SF. Should be at the open practice listed below once I do. He's almost a year old already?!

https://www.facebook.com/briarcliffmx/photos/pcb.2334226663269417/2334225763269507/?type=3&theater

13

Pics and Vids / Atv Scene race reports

« on: January 11, 2018, 11:45:54 PM »

There's a ton of these on their site. I haven't been on it in so long I forgot but check out some of these pics!

http://atvscene.com/fast-trak-12-30-01/

http://atvscene.com/nathan-dallas-and-cole-robbins-8-27-98/

http://atvscene.com/wayne-county-speedway-orrville-oh-2003/

I was actually at the race above. They used to have a sick motocross track I raced my Blaster on all the time.

14

MX / Re: Battle for Ohio 2017

« on: August 25, 2017, 08:32:47 AM »

Third and final round this weekend at Briarcliff MX in Nashport, OH. Quads race Saturday at 3pm.

15

MX / Re: Battle for Ohio 2017

« on: July 24, 2017, 02:55:10 PM »

That's a good point. My entry speed probably isn't good either. I'm running 7psi in the rear tires now maybe I'll experiment with 8 and go from there. That's free at least haha.