TRX250r.org

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - havinnoj

Pages: 1 2 [3] 4 5 ... 11
31
Wanted / WTB: Waterpump shaft OEM
« on: April 25, 2020, 12:04:28 PM »
Looking for a nice clean, nos, new, etc.

32
Lounge / .ORG Shirts Order Here!
« on: April 14, 2020, 11:45:36 PM »
Hi All -

This is for black shirts only.  Unsure about doing red shirts, design isn't up to my liking yet so TBD. 

>>>>>Order here <<<<<
https://www.customink.com/g/xdh0-00c6-f888

Shirts are $26/ea for the estimated # we were getting.  These are Hanes Beefy-T in TALL sizes (figure they shrink in the wash and who couldn't use the extra inches).  Instead of collecting payment, receiving bulk shipment, re-shipping to you - the above link allows us to select size(s), quantity, pay online directly, and enter our direct shipping info (which is even cheaper than I'd mail USPS).  So win win win!

Note that shipping is $4.99 to ship one item, $6.98 for 2 items, $8.97 for 3 items, and $9.99 for 4 or more items.

Pay with PayPal or credit card ($0.49 processing fee applies to credit card). 

Let me know if any questions, issues, etc.   Hopefully this is smooth sailing for all of us!

33
Lounge / .ORG Shirts & Hoodies - Opinions Wanted
« on: April 05, 2020, 06:41:24 PM »
Hey guys - want to make up some shirts and/or hoodies.  Not planning to make (& keep extras) so want to do a group order.  Typically after quantity of 6+, the price breaks start coming.  Would like opinions on which you'd prefer: 
1.  T shirts - short sleeve or long sleeve
2.  Hoody
3.  or both

Design feedback:
1.  Colors of shirt/hoody (white, red, grey, black, blue).  (Lots of options for logos - see the options below - we can refine this later).
2.  Logo placement for T's (large centered vs small pocket vs large rear).  For Hoody's I figure large center placement. 

For the T's - after reading reviews, will likely order these as Hanes Beefy TALL since the other options tend to shrink a bit in the wash.  Any issues with that, let me know please!

This will help me narrow down the options.  That will give us an idea on pricing and we can finalize logo design after.  For now here's a couple ideas to get the discussion started.

34
Wanted / WTB: NPM Brake Blockoffs
« on: April 04, 2020, 04:16:19 PM »
Looking for a couple NPM brake blockoffs - black, red, or raw. 

35
For Sale - Parts / FS: Hinson 8 plate
« on: March 30, 2020, 08:58:35 PM »
Hinson 8 plate w/gears - has some wear but came out of a running bike - went to a bigger motor & slingshot.  No fibers/plates/springs.  $475 shipped.  $950 new ($750 new without fibers, plates, springs). 

36
Carburetor, Intake, and Exhaust / 363 Sphynx Jetting Recommendations?
« on: March 30, 2020, 03:03:41 PM »
Looking for baseline PWK jetting recommendations, at sea level or post your elevation.

Needle
Main
Pilot

37
Wanted / WTB 2 ESR Brake Hangers
« on: March 30, 2020, 02:55:40 PM »
Looking for 2 brake hangers - great condition only.  Before I go new seeing what's out there.

38
Suspension and Chassis / Aftermarket 250R Axle w
« on: March 23, 2020, 10:08:33 PM »
Going through my notes and saw this, thought I'd post here for reference. 


Axle weights with wheel hubs
  • Durablue X-33                     = 18lbs
  • Rpm Dominator w/ std hub   = 22lbs
  • Rpm Dominator w/ race hub = 23lbs
  • Lonestar Axcalibur*              = 23lbs

*LSR quoted shipping weight.

39
Wanted / WTB: 3rd & 6th Gears Countershaft
« on: March 14, 2020, 05:43:14 PM »
Looking for great condition only 3rd & 6th countershaft gears 88-89.  Anybody got em?

40
Engine and Bottom End / Intake Clamps
« on: March 08, 2020, 04:19:02 PM »
Whats everyone running for intake to carb clamps?  I have a couple boyseen ones that have been good and another worm gear style.  I’ve seen these over the years but never personally tried.  What are people running?
http://www.clampco.com/products/t-bolt.asp

41
Engine and Bottom End / LED Light Options DC
« on: February 27, 2020, 07:15:39 PM »
Working on my lighting setup.  Utilizing Ricky Stator 40W AC stator (will be about 30W DC), Trailtech rectifier, Trailtech battery). 

What are people running?  I'm having a hard time finding quality lights are small enough AND under the wattage (25 total for the front) since I'll have provisions for rear brake light and lighted whip (though doubt I'll use them much really).  And what beam pattern are folks liking on the sand?

2 KC Flex - 10W/ea - 1950 lumens - could run one spot & one flood? 
https://www.kchilites.com/light-type/led/flex-led/flex-single-led-system-pr.html

1 Baja Designs S2 Pro - 24W - 2450 lumens - 2 led's but on one unit so lacks some redundancy
https://www.bajadesigns.com/products/s2-pro-led-driving-combo.asp

2 Baja Designs S2 Sports - 12W/ea - 2260 lumens - 2 units / 4 total LED's
https://www.bajadesigns.com/products/S2-Sport-LED-Driving-Combo.asp

42
Projects / I Did A Thing
« on: February 25, 2020, 05:52:22 PM »
Well this +4 hot rods showed up.. gotta figure out something to use it on lol.

43
Engine and Bottom End / CR Stator Options
« on: February 23, 2020, 10:49:23 PM »
Exploring getting DC power output for lights on 01 CR ignition.  Ricky Stator makes one, heard Trail Tech used to, any others to consider?  Issues or things to be aware of?

44
Body and Controls / Tool Box - OEM 88-89 vs 400ex
« on: February 19, 2020, 01:07:42 PM »
I've never had an 88-89 toolbox in my hands so can't compare.  Sounds like a 400ex box will fit, but is it a perfect fit or any issues (like the 250R tools don't fit or something)? 

Or am I better off finding a nice 88-89 toolbox?

45
Duner / Feb 2020 Oregon Dunes
« on: February 10, 2020, 11:39:14 AM »
Saw a break in weather and hit the dunes last minute.  Sand is heavy-soft and torn up but weather is great!

Pages: 1 2 [3] 4 5 ... 11