Topics

1

For Sale - Misc Stuff / SHOT Carbon fiber helmet and 686 goggles

« on: July 17, 2019, 11:57:27 AM »

Lightest helmet on the market. 2.2 pounds. Constructed from 5x5 carbon fiber twill.  Extra Large Size. Fits true to size.

686 Sinister goggles with extra lenses and bag.

All of this is in like new condition with original packaging included. Worn for a few months of light riding around my property. Liner is removable and washable.

$220 shipped. I can take a pic of the actual product for anyone interested once I am at the house.

2

For Sale - Parts / FS: Sand Star tires $150 shipped

« on: May 23, 2019, 09:52:50 AM »

Sand Star tires. Excellent condition. $150 to mainland USA. Thanks

3

Wanted / Anyone have a red OEM hood for sale?

« on: March 21, 2019, 10:39:07 AM »

I'm going back and forth on carbon or OEM red hood.. Does anyone have a decent red hood they'd like to get rid of? I'm not scared to do a little sanding and polishing. Just want all the mounting tabs intact and no cracks.

Thanks guys.

4

For Sale - Parts / SOLD! Fourwerx Carbon scooped hood.

« on: March 20, 2019, 10:35:28 AM »

Hey guys. I decided to try the flat carbon hood. This hood has been putted around my trails once or twice and around the neighbor hood. It is like new. Not a scratch. I'll even include the sticker pack.


SOLD.

5

The Mad Scientist / CR250 ignition lighting coil

« on: February 25, 2019, 03:43:31 PM »

Anyone here running lights with a CR250 ignition? What kit or parts did you use? Any and all info welcome.

I'm looking to add a small 6" light bar behind my front bumper and I prefer to not use the Ballistic Batteries setup that I currently have.

Ricky Stator or OEM trx ignition are not an option at this time. I am partial to the benefits of the CR ignition and want to continue running it.

6

Suspension and Chassis / Brake pad options

« on: February 14, 2019, 12:03:43 PM »

What do you guys recommend? I figured I would ask as there are all sorts of compounds and brands. What works and what do I stay away from?

This will be for my back brake. Might even be going on a well used factory rotor. 

7

For Sale - Parts / OEM thumb throttle, ESR cover $35 shipped

« on: December 03, 2018, 05:33:19 PM »

OEM throttle from an 88 as far as I know. It is pretty worn out on the inside, but it actually worked and pulled my 39mm carb WOT. ESR cover. Any of you guys need it for parts or is it worthless?

$35 shipped.

8

For Sale - Parts / All Balls tie rod kit (52-1011) $60 shipped.

« on: December 02, 2018, 11:16:48 PM »

All Balls tie rod kit. Fits 86-89 Trx250R. Retails for $100. Includes heavy duty rods, rod ends, and all hardware. Looking to get $60 shipped. Thanks.

https://www.allballsracing.com/tie-rod/52-1011.html

9

Lounge / Cleaning your R after a trip... What methods are you guys using?

« on: November 29, 2018, 01:51:00 PM »

What method do you guys prefer for clean up? I'm looking into getting a pressure washer to help with clean up after some of these muddy rides and am curious of what others use.

Most of you dune guys probably don't have to use very much elbow grease lol, but here in Alabama it get's nasty during the colder months. Hand washing was a 2-3 hour job last time and honestly it keeps me from casual riding after it's clean. After that much work I don't want to get it nasty again for a trip around my property.

10

For Sale - Parts / Hiper CF1 REAR 10" beadlocks $250 shipped

« on: November 13, 2018, 04:48:51 PM »

Like new. Single locks. Red rings. 10" diameter, 9" width. These wheels held air for months before I took the sand tires off. Zero leaks, zero stripped hard ware, zero issues. Like new condition. I am only selling so that I can turn around and buy 9's.

$300 and I will ship on my dime. I will send detailed pictures to anyone that is interested. Thanks guys.

11

Wanted / WANTED: FourWerx "scooped" carbon hood

« on: October 18, 2018, 10:02:33 AM »

Just seeing if anyone has a used one they would like to get rid of before I drop $200 on a new one. Thanks guys

12

For Sale - Parts / FOR TRADE: Hiper CF1 10" rear wheels trade for 9"

« on: October 17, 2018, 01:57:08 PM »

Long shot I know, but figured I would try it before selling. I have TWO 10" diameter 9" wide Hiper Carbon CF1 wheels in excellent condition. No spun riv nuts or any gimmicks. Used in the dunes four times is what I was told.

I would like to have 9x9's for more dirt tire options. If you are interested just let me know and I'm sure we can work something out. Thanks

13

For Sale - Parts / SOLD!! Alba Racing nerfs w/heel guard (any year TRX)

« on: September 06, 2018, 01:15:21 PM »

Alba raw aluminum finish nerf bars with heel guards and red nets. Extra wide "pro pegs" and hardware for any year trx250r. They may have some scuffs or dings here and there but they are nice and not very old. All hardware, plus spares, included. You will need to use your peg mount bolts if you have an 86 model and drill a hole in the Alba supplied peg stub.

 $75

14

The Mad Scientist / Durbin Machine wp hose barbs and AN fittings

« on: September 05, 2018, 12:27:19 PM »

This place makes some cool parts for the R's. He has clutch parts that are no longer made and also makes water pump hose barbs in several colors. They also make these barbs with an AN male fitting. I use AN's at my radiator and love to use them anywhere I can on other projects. Just figured I would let you guys know if you did not already.

I could not find these listed, but he responded quickly and sent me a pic so if you are looking for something you do not see send them a message.

15

For Sale - Parts / SOLD!! JL Engineering LED grab bar $50 or trade? (88-89)

« on: August 27, 2018, 12:02:16 PM »

Looks good and works great, but it will not fit my new 86 frame without drilling a new hole. One half inch bit of the LED rubber coating is peeled up. Could be super glued easily. All LED's work fine as is. Flag pole mount included.

$50, buyer pays shipping. I can use my company account for a discounted rate.

Thanks