TRX250r.org

Recent Posts

Pages: [1] 2 3 ... 10
1
ATC250R / Re: 85 250r built from spare parts
« Last post by dp250r on June 23, 2022, 08:33:26 PM »
I raced tt with the 450r swingarm setup the trike handles totally different. It corners alot better seams  to hold a line better.
2
Wanted / 88 Cylinder
« Last post by zmoto93 on June 23, 2022, 03:19:35 PM »
I currently have a 88 bottom end with 86 top end and I’m looking for a 88 cylinder to buy.
4
The Mad Scientist / Re: WP covers
« Last post by SFricia on June 23, 2022, 03:34:43 AM »
For anybody that ordered the Selvy WP covers from Cyndi, I finished machining them a few days ago, and they'll go to anodize in the next few days.

Thanks,
S
5
Engine and Bottom End / Re: Best idea to repair this in place?
« Last post by The norm on June 22, 2022, 07:29:15 PM »
I do not believe that you can apply enough torque to the nut to seat the flywheel on the taper. The flywheel could wobble which will make your situation worse. Cases are not cheap neither is case repair.
Loren
6
Suspension and Chassis / Re: Atv shocks and suspension facts
« Last post by Burns363R on June 22, 2022, 08:39:27 AM »
Good write up, but one thing they missed was that longer arms can give more travel on the same ballpoints over shorter arms. 
7
Lounge / Re: LED Performance Intake Filter and Outerwear Part Numbers
« Last post by croat1 on June 22, 2022, 12:06:03 AM »
Blake, I tried searching.  No luck my friend.  For whatever reason when I search on FB the comments no longer come up on older posts….does the same thing happen to you?  Any others here have the same issue?

Joe
8
Lounge / Re: St. Jude fundraising (case set giveaway)
« Last post by Langbolt on June 19, 2022, 07:24:47 PM »
Done!

:)
9
Pics and Vids / Re: Engine marking (internal)
« Last post by croat1 on June 19, 2022, 11:06:50 AM »
1986 ATC250R transmission.  Blue mark on gear.

Joe

10
The Mad Scientist / Re: Brake pedal
« Last post by croat1 on June 19, 2022, 12:03:42 AM »
Yes sir, I have another batch going to anodize here in a few days, so please reach out to me before I get them back and put them back under the knife.

Ok cool I’ll send you my order on messenger. 

Thanks as always

Joe
Pages: [1] 2 3 ... 10