See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: The Dream Build
Back at it folks. Sorry for the delay. Here it is. Brand new Narrow CR500 link chassis. This is the final piece to the puzzle. Build will commence.
February 21, 2018, 05:16:32 AM |
1 |
|
Re: The Dream Build
This Chassis was just built and finished last month. Just got back from powder yesterday. It’s Bengal Red in this powder type or Red Baron in Prismatic.
February 21, 2018, 06:43:40 AM |
2 |
|
Re: The Dream Build
So finally progress folks. Engines in arms are on, pipe and seat cover came and shocks are on the way. This one willl finally be done in the coming weeks. I have the swinger also but it had to go back to powder cause I screwed something up in a spot with the powder that was on there. June 17, 2018, 07:46:35 AM |
2 |
Re: The Dream Build
Nice, how does the subframe fit? Subframe fits perfect as it should. There where only a few small things that needed tweaking with this frame especially considering it is the first one ever made. . I couldn’t be happier how it turned out. Everything fits nice and tight as it should. This frame also uses a thicker wall tubing then was used on the Laeger, lone stars and any other of the frames that were produced and still only weighs in at 33 pounds. Isf did an amazing job on this frame. Few small things were added such as the Cr coil mount and the screw on holder for the rear brake lever. Isf also addressed the vertical bends at the exhaust port for the pipe to fit. Now the exhaust clears the frame with ease. It’s no wonder this wasn’t thought of yeas ago instead of having to wrestle with a tight fit. June 18, 2018, 05:02:49 AM |
2 |
|
Nos 89 fenders
For Sale are a New NOS Set of 89 Shasta White Honda Trx250r front & rear fenders. Sale is for both front fenders and rear fender. RED OEM HOOD AND FRONT FENDER DECALS ARE NOT INCLUDED IN SALE! ALSO, WHITE 89 HEADLIGHT HOOD IS NOT INCLUDED IN SALE EITHER. Fenders have never been mounted or used and have been stored in doors since I purchased them years ago. Fenders will not come in original Honda boxes, only the original oem bags. When I purchased them I did not receive them in the boxes. Also, the decal in the picture was never applied to fenders only held in place with painters tape to see how it would look then removed immediately. Fenders are in perfect condition as they would have came years ago from Honda. If you have any questions feel Free to message me and I will answer any question. Please know what you are buying as I do not except returns. Fenders will be shipped by way of fedex with insurance and signature verification of receipt. 2600 sent as gift or cover the PayPal fees plus shipping. Local pickup is also welcome. June 18, 2018, 12:24:48 PM |
3 |
|
Re: The Dream Build
So my shocks came in yesterday. I’m almost there. Still waiting on carb, exhaust flange, wheels & tires and my swinger from the shop from getting the bearings pressed in. I went With the Pep PB1 up front and the zps dual rate rear. These are really nice shocks. Didn’t realize how much goes into setting them up the right way. Hopefully within the week I should have the rest of my parts and be ready to get this thing tuned and get going with it. Been a very long time with this build but it has all the parts I wanted and is right the first time round. I also had my seat covered with a gripper cover from fourwerx. Cbr Rad and RTC shrouds and handles levers are what I went with. Front end is on too just need to get the shocks put on today. Coming out nice if I do say so myself.
July 07, 2018, 09:29:18 AM |
4 |
|
Re: The Dream Build
Here it is folks. Finally coming together. Had a few hiccups but hope to be done very soon. I guess working with custom stuff it’s to be expected. Front end and rear end is on and buttoned up. Did a leak down on my brand new engine and found out the cases were warped from the factory and wouldn’t seal. So apart engine came yet again but is going back together as we speak. On the other hand building with all new parts has been a blessing. Nothing to rebuild and don’t have to worry about it’s service life to come. Long as I maintain it should be good to go for a long time to come.
October 21, 2018, 11:18:04 AM |
1 |
|
Re: The Dream Build
Front end
October 21, 2018, 11:19:17 AM |
2 |
|
Re: The Dream Build
Rear line
October 27, 2018, 01:32:06 AM |
1 |
|
Re: The Dream Build
Finished side shot
February 28, 2019, 08:38:26 PM |
1 |
