TRX250R.ORG

Site Sponsors => LED Performance => Topic started by: ledperformance on August 23, 2013, 04:53:02 PM

Title: TRX 250R 350L Prototype Exhaust
Post by: ledperformance on August 23, 2013, 04:53:02 PM

Arlan works on the 350L prototype exhaust for TRX 250R.
Welding the pipe.
[ATTACH=CONFIG]1536[/ATTACH]
Cutting out the pieces.
[ATTACH=CONFIG]1527[/ATTACH]
Partially completed pipe.
[ATTACH=CONFIG]1528[/ATTACH]
Finished product.
[ATTACH=CONFIG]1529[/ATTACH]
Rolling the sections.
[ATTACH=CONFIG]1530[/ATTACH]
Finished product.
[ATTACH=CONFIG]1531[/ATTACH]
Fitting the sections.
[ATTACH=CONFIG]1532[/ATTACH]
Grinding the sections for a good fit.
[ATTACH=CONFIG]1534[/ATTACH]
Fitting sections.
[ATTACH=CONFIG]1535[/ATTACH]

Title: TRX 250R 350L Prototype Exhaust
Post by: trx250scar on April 27, 2014, 01:59:28 PM

Is it me or Does the pics not match the description.

Title: TRX 250R 350L Prototype Exhaust
Post by: Bigred on April 27, 2014, 03:54:23 PM

Lol a ya

Title: TRX 250R 350L Prototype Exhaust
Post by: havinnoj on April 27, 2014, 06:27:33 PM

Quote from: spiritaces;32528

It is, I think OJ added pics to anywhere they were missing. It was so we didnt have any broken links. [MENTION=276]ledperformance[/MENTION] can you put the pictures back?

Nothing special happened to the pics / links - just a byproduct of moving where the pics were stored.  Luckily it only pertains to the first few months of the forum's attachments.

Title: TRX 250R 350L Prototype Exhaust
Post by: JesseA420 on May 06, 2014, 05:28:55 PM

did anything come of this 350L??

Title: TRX 250R 350L Prototype Exhaust
Post by: ledperformance on May 17, 2014, 10:12:02 PM

I don't know what to do about the pictures.
The 350L was part of the development process. Today I have been working on LED 350RX4. It is a 27 piece big bore pipe for the 330-370, LED ESR and LED Sphinx cylinders. We a hoping to increase the peak hp and at the same time keep the great low end and mid range power of the 350G pipe. We have increased the amount of sections to make the bends smoother. Unfortunately this will increase the cost of the pipe. If it passes our test criteria it will be sold as a limited quantity Works Team pipe.  Notice I spelt works correctly!

Title: TRX 250R 350L Prototype Exhaust
Post by: christph on May 19, 2014, 12:39:39 AM

Quote from: ledperformance;34260

I don't know what to do about the pictures.
The 350L was part of the development process. Today I have been working on LED 350RX4. It is a 27 piece big bore pipe for the 330-370, LED ESR and LED Sphinx cylinders. We a hoping to increase the peak hp and at the same time keep the great low end and mid range power of the 350G pipe. We have increased the amount of sections to make the bends smoother. Unfortunately this will increase the cost of the pipe. If it passes our test criteria it will be sold as a limited quantity Works Team pipe.  Notice I spelt works correctly!

Any estimate on how much more?  Also, when will they be available?  I'll be looking for a new pipe this summer.

Title: TRX 250R 350L Prototype Exhaust
Post by: pinned250r on May 19, 2014, 09:26:24 AM

Quote from: ledperformance;34260

it will be sold as a limited quantity Works Team pipe.  Notice I spelt works correctly!

I almost got really upset....Then i realized correct grammar and got happy again.