TRX250R.ORG
General => Projects => Topic started by: Tbus93 on August 29, 2013, 01:49:43 PM
-
just bought this bike only gave 3 grand for it put its got already 6 grand in aftermarket parts on it which includes a rad +4 axle long travel elka front shocks long travel a arms (I think laeger not for sure pwr aluminum radiator aftermarket bumpers original plastics no cracks esr brake pedal nacs kickstarter pro design shifter esr water pump cover pro taper low contour bars vforce 3 reeds rad anti fade locknut and bearing carrier and I purchased a kit from esr which will add a trx 5 pipe 38mm pwk carb billet exhaust flange and air breather eliminator kit the only thing I noticed is it runs a little fat on the stock pj carb almost forgot the hiper tech carbon fiber wheels it's an 88
-
[ATTACH=CONFIG]1646[/ATTACH][ATTACH=CONFIG]1644[/ATTACH][ATTACH=CONFIG]1645[/ATTACH]
-
Pretty nice bike you got there. Welcome to the site.
-
Thanks look forward to my new esr trx 5 pipe that's only thing i wanted to change on the whole bike
-
Looks good,welcome!
-
Welcome! Very nice. I like those winged graphics. :smile-new:
-
Nice bike and welcome, you got a hell of a deal from what I can see and from what you told us. Man I wish they were around here like that to find that cheep and if I had the money to buy and part out to help all of us brothers.
-
I thought about buying it to part out because between the a arms shocks an hiper tech wheels that's 3 grand but then I found it had original plastics and decided I was gonna keep all of it, I also think it might have a the laeger pro trax a arms and spindles I had to do some research on it to see what they look like ill have to double check
-
[ATTACH=CONFIG]1654[/ATTACH][ATTACH=CONFIG]1655[/ATTACH][ATTACH=CONFIG]1656[/ATTACH][ATTACH=CONFIG]1657[/ATTACH] took a few more pics of the bike found out there now pro trax spindles can anyone tell me what kind of Long travel A arms?
-
Can you get a better pic of the arms for all of us to help you figure out what they are.
-
I will do that tomorrow for you guys
-
[ATTACH=CONFIG]1678[/ATTACH]
-
Those look like Houser arms
-
[ATTACH=CONFIG]1691[/ATTACH][ATTACH=CONFIG]1692[/ATTACH][ATTACH=CONFIG]1693[/ATTACH] here is some more pics of the A arms most people tell me they are roll design i just want to know exactly
-
Well I could be wrong but that's not a roll design front end bud, I do know that for a fact.
-
I was thinking Roll too. It's not a Houser IMO and def not a protrax. Why are you so sure it's not Roll Jamie? Educate us please.
-
All rolls have a plate on the bottom arm for the shock mount, and all I've seen on the upper is heims for there long travel. I use to have all the roll/Duncan catalogs and I checked the site too. But like I said I could be wrong. But the design and so on really look like a set of Houser arms my buddy had on his race r back in the day.
-
The only reason I don't think there houser is the way the top a arm connects to the frame I'm not sure I know roll has the plate
-
Check this out to Already emailed ESR hopefully they get back to me soon [ATTACH=CONFIG]1703[/ATTACH]
-
Check this out to Alr emdailed ESR hopefully they get back to me soon [ATTACH=CONFIG]1703[/ATTACH]
So what happened to your pipe man, or is that Your new esr pipe.
-
that was the brand new ESR trx 5 pipe I got on saturday morning it came with a hole in it must not have been pressure checked or anything
-
Man that just sucks, especially if your like the rest of us when parts come in you look them over and want to go put them on asap. Well I know they will take care of you man, good luck.
-
Had it all the way on the bike even siliconed the pipe together Noticed it when it started the bike I felt some heat on my leg
-
Bummer on the pipe!
-
Got ahold of esr there sending me a new pipe this week and the exhaust flange they forgot no big deal, I think once I get my 85 atc motor back from f.a.s.t racing I'm gonna switch my cylinders between the two bikes because Im having a esr 310 big bore on it and I'd rather have it only my quad here's a pic of the bike before I got some oem plastics (no new rear to hard to find) and a 2+2 durablue
-
Nice looking trike man, so now you have 2 cool rs. Sweet, you will need to get a pic of both of them together and post it.
-
My motor on that's been getting rebuilt for 4 months had to get new center cases for it because I shattered the piston in it and it made about a quarter size hole inside the crankcase and about 4 stress fractures once it's done ill get pictures of em together now that I got my quad I almost want to do something big for the motor maybe a 350 or 370
-
Bigger is always better, who's doingthe motor for your atc, rite now
-
F.a.s.t racing he builds some pretty sweet stuff but the turn around is not good I probably won't take it there again
-
yah that's gotta suck man.
-
New pic with the new pipe
-
[ATTACH=CONFIG]1932[/ATTACH][ATTACH=CONFIG]1931[/ATTACH] just got my motor back today going into tomorrow esr 310 kit moose racing billet basket dp clutches 88 update kit hotrods shortrod crank v force 3 reeds new shift shaft billet exhause flange oem cases in great shape no cracks piston shattered destroyed alot just happy to get it back after 5 months
-
Looks nice, so install and break in tomorrow and riding this weekend then. Must be nice.
-
Don't your just love the look, of a fresh motor sitting on the dining room table? It's like, Motor Porn! :applouse: Good luck!
(http://i532.photobucket.com/albums/ee328/RideRed187/G%20Pics/ass12-1.jpg) (http://s532.photobucket.com/user/RideRed187/media/G%20Pics/ass12-1.jpg.html)