TRX250R.ORG

Classifieds => For Sale => For Sale - Parts => Topic started by: jamieg45 on September 01, 2013, 01:34:48 PM

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 01, 2013, 01:34:48 PM

Ok what I have here is a +3 Laeger pro trax front t-pin front end, the arms and stem are powdered flat black. All seems real tight and in very nice shape. I have one side complete and the stem comes with a standard anti-vibe pro trax stem clamp also and its polished too. $1,150.00 shipped. ( I will have more pics of it all up today, my camera messed up last night for the rest of the pics.) And this also takes oem Honda trx 250r calipers, I did check that already.

                         Pending sale on arms and spindles
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Honda%20parts%20for%20sale/IMAG0368_zpsdc899380.jpg)

(http://i1258.photobucket.com/albums/ii530/jamieg4558/Honda%20parts%20for%20sale/IMAG0435_zps21cf996f.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Honda%20parts%20for%20sale/IMAG0436_zpsab4abd88.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Honda%20parts%20for%20sale/IMAG0437_zps8fb91d55.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Honda%20parts%20for%20sale/IMAG0438_zps5491cdb6.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Honda%20parts%20for%20sale/IMAG0439_zps49bd87b1.jpg)
(http://i1258.photobucket.com/albums/ii530/jamieg4558/Honda%20parts%20for%20sale/IMAG0440_zps809ee0fa.jpg)

Title: +3 Laeger T-Pin front end (pro trax )
Post by: sidcon on September 01, 2013, 01:46:24 PM

Shoot, if this was a +4 id buy it so fast it would have been on my bike already. Once you go protrax you never go back lol. Good luck with the sale.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 01, 2013, 01:47:58 PM

Thanks sidcon, it's a very nice front end and I will be getting all the pics up just as soon as I get my batteries for my camera.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: Vroomy on September 01, 2013, 06:44:36 PM

Dam Jamie I wish this was for sale before I spent all my coin on these poxy LSR arms!

Title: +3 Laeger T-Pin front end (pro trax )
Post by: DnB_Racing on September 01, 2013, 06:57:26 PM

I want that bar clamp !!!

Title: +3 Laeger T-Pin front end (pro trax )
Post by: 89Longrod on September 01, 2013, 07:35:21 PM

I had one of those bar clamps a few years back and got rid of it...I regret it all the time.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 01, 2013, 08:21:22 PM

Quote from: DnB_Racing;10683

I want that bar clamp !!!

Sorry the clamp goes with the stem.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 02, 2013, 10:10:46 AM

Its the standard stem, you are correct. What I was told from a friend who is a big laeger guy that its a newer style and much better that way. He says the heims and what not to the stem don't hold in for mx as well as this one does. But I'm only going off of what he said, please help me if I'm wrong.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: havinnoj on September 02, 2013, 11:15:12 AM

Quote from: jamieg45;10738

Its the standard stem, you are correct. What I was told from a friend who is a big laeger guy that its a newer style and much better that way. He says the heims and what not to the stem don't hold in for mx as well as this one does. But I'm only going off of what he said, please help me if I'm wrong.

Scott at Laeger's will tell you that the reason they went to the ball joint stem was to keep the cost of the kit down.  They still make the clevis / original pro-trax stem and to my understanding it performs better than the ball joint stem.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 02, 2013, 11:27:19 AM

Quote from: havinnoj;10743

Scott at Laeger's will tell you that the reason they went to the ball joint stem was to keep the cost of the kit down.  They still make the clevis / original pro-trax stem and to my understanding it performs better than the ball joint stem.

Thanks man I wasn't quite sure, I was just going off of what my buddy was saying and why.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 02, 2013, 10:10:41 PM

All of the pics are up for this now

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 10, 2013, 11:37:52 PM

Taking reasonable offers.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 15, 2013, 10:03:46 PM

Ok with all the questions and such about the spindles and if all is tight, I found some issues with some items. It will need new tierods one end is stripped for the oem r tierod end. The upper and lower part of each spindle is nice and tight, but when I wentand pulled out the clevis from the upper a-arm the part that goes in the arm is tweeked. I called and talked to laeger and all is in stock and the cost for 2 tierods is $100 and the upper clevis is $125. I am lowering the price on the set because I don't have the money to order the new parts and will let he buyer get them themselves. $1,250.00 shipped and like I think I said these take 250r calipers not 400ex ones

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 18, 2013, 02:34:55 PM

This is it all, last price drop. I will let it go for $1,150.00 shipped

Title: +3 Laeger T-Pin front end (pro trax )
Post by: havinnoj on September 18, 2013, 05:53:20 PM

PM me with a price shipped without the stem.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 18, 2013, 06:11:53 PM

Quote from: havinnoj;12565

PM me with a price shipped without the stem.

Pm sent bud.

Title: +3 Laeger T-Pin front end (pro trax )
Post by: jamieg45 on September 18, 2013, 11:11:35 PM

Pending sale on arms and spindles, stem and clamp will be sold separately. Clamp is spoken for as of now