TRX250R.ORG

General => Lounge => Topic started by: Pumashine on July 03, 2013, 09:35:03 PM

Title: I am just testing the site for pics
Post by: Pumashine on July 03, 2013, 09:35:03 PM: I am just testing the site for pics
This is the post I was making when I got banned
This is not building #1
(http://i44.tinypic.com/2u7llyu.jpg)
These are not the parts I do on the side.
(http://i41.tinypic.com/2m34pb7.jpg)
This is not my Polishing shop.
(http://i40.tinypic.com/effper.jpg)
These are not the new redesigned Puma Stealth Shrouds
(http://i40.tinypic.com/2igge2x.jpg)
Title: I am just testing the site for pics
Post by: RIDE-RED 350r on July 03, 2013, 09:37:59 PM: Love the sig Tony! LMAO!
Title: I am just testing the site for pics
Post by: Pumashine on July 03, 2013, 09:55:07 PM: Quote from: RIDE-RED 350r;24
Love the sig Tony! LMAO!
Thanks Joe, sent your stand out yesterday. This post was a answer to Carlos's statement that I was evicted from my work and did not have a business anymore. The first half the post got deleted by FFpower. I posted the building from the street. The overhead door open with a quad frame and a couple motors on a rolling table. Packages going out priority mail. You can only put so many pics in one post. Sometimes there is not enough room on the page.
Title: I am just testing the site for pics
Post by: RIDE-RED 350r on July 03, 2013, 09:59:16 PM: Gotcha...

Looking forward to receiving the engine stand... Going to be nice working on an engine that's not wanting to roll all over my work bench ha ha! Love your polishing work, looks top notch to my eye!
Title: I am just testing the site for pics
Post by: RIDE-RED 350r on July 03, 2013, 10:00:12 PM: Quote from: spiritaces;40
you should be able to put 5 picks in one post. Do you need me to add more than 5

I have found that on occasion the ability to post more than 5 would be handy. Saves making 2 posts where one would suffice.
Title: I am just testing the site for pics
Post by: 05450r on July 03, 2013, 10:04:27 PM: Looks good,I knew I should've ordered motor mounts when I ordered my coil mount today!
Title: I am just testing the site for pics
Post by: Pumashine on July 03, 2013, 10:13:45 PM: Quote from: spiritaces;40
you should be able to put 5 picks in one post. Do you need me to add more than 5
This was something I copied on Monday. No worries.
Title: I am just testing the site for pics
Post by: Rupp250 on July 03, 2013, 10:23:38 PM: I am just testing pics as well.[ATTACH=CONFIG]53[/ATTACH][ATTACH=CONFIG]54[/ATTACH][ATTACH=CONFIG]55[/ATTACH]

Seems to work
Title: I am just testing the site for pics
Post by: derby on July 03, 2013, 10:27:28 PM: You know it is serious when you handle the polished parts with white gloves. Nice shop tony.
Title: I am just testing the site for pics
Post by: Pumashine on July 03, 2013, 10:32:06 PM: Quote from: Rupp250;61
I am just testing pics as well.[ATTACH=CONFIG]53[/ATTACH][ATTACH=CONFIG]54[/ATTACH][ATTACH=CONFIG]55[/ATTACH]

Seems to work
That may be objectionable material right there. Wheres a mod? JK LOL
Title: I am just testing the site for pics
Post by: Rupp250 on July 03, 2013, 10:41:36 PM: Wait, Tony is not a mod? Is he just a Martyr?
Title: I am just testing the site for pics
Post by: Pumashine on July 03, 2013, 10:54:17 PM: Quote from: Rupp250;80
Wait, Tony is not a mod? Is he just a Martyr?
FFpower said Fred was a Martyr. He has not come up with a name for me yet. Oh wait, its in my signature.
Title: I am just testing the site for pics
Post by: jcs003 on July 04, 2013, 07:52:45 AM: puma, what do you think about making rotor and sprocket guards?

john
Title: I am just testing the site for pics
Post by: Pumashine on July 04, 2013, 09:03:37 AM: John, did you have a design in mind? Its easy to make parts. The hard part is building something that works, is popular and does not cost a fortune to build.
Title: I am just testing the site for pics
Post by: Farmboy1979 on July 04, 2013, 09:07:42 AM: Puma- if you could make some frame guards- to protect the paint where your boots rub it off, I'll buy two sets.
Title: I am just testing the site for pics
Post by: motofool250r on July 04, 2013, 09:08:57 AM: Quote from: Rupp250;61
I am just testing pics as well.[ATTACH=CONFIG]53[/ATTACH][ATTACH=CONFIG]54[/ATTACH][ATTACH=CONFIG]55[/ATTACH]

Seems to work

These Pics need to have a caption on them of some sort or they dont exist
Title: I am just testing the site for pics
Post by: jcs003 on July 04, 2013, 09:28:15 AM: Quote from: Pumashine;248
John, did you have a design in mind? Its easy to make parts. The hard part is building something that works, is popular and does not cost a fortune to build.

i was thinking something you could cut out of aluminum or stainless like many of your parts. maybe use spacers and longer bolts. obviously be round. let me find pics of something that will inspire. troy is an excellent designer, im sure he will help.

john
Title: I am just testing the site for pics
Post by: jcs003 on July 04, 2013, 09:36:58 AM: how are these?

http://www.ebay.com/itm/250ex-300ex-400ex-450r-Honda-Sprocket-Guard-Steel-Clear-Zinc-Coating-/171055649043?pt=Motors_ATV_Parts_Accessories&hash=item27d3b61113&vxp=mtr

[ATTACH=CONFIG]62[/ATTACH][ATTACH=CONFIG]63[/ATTACH][ATTACH=CONFIG]64[/ATTACH]

here is the sprocket bolt circle.

john
Title: I am just testing the site for pics
Post by: jcs003 on July 04, 2013, 09:41:44 AM: here are a couple more ideas:

http://www.ebay.com/itm/TRX-450-300-EX-250-R-MX-XC-Sprocket-Guard-/251296748623?pt=Motors_ATV_Parts_Accessories&hash=item3a8274144f&vxp=mtr

front sprocket guard:

http://www.ebay.com/itm/Q-TRX400EX-FSG-BLINGSTAR-FRONT-SPROCKET-GUARD-FOR-HONDA-TRX400EX-99-04-/140916078407?pt=Motorcycles_Parts_Accessories&hash=item20cf40b747&vxp=mtr

john
Title: I am just testing the site for pics
Post by: Rupp250 on July 04, 2013, 10:26:03 AM: Hmmm I like that front sprocket guard. Possibly make one that replaces the washer/bolt setup.
Title: I am just testing the site for pics
Post by: sameltoe on July 04, 2013, 10:37:17 AM: John, you mean something like these?? :) obviously these are on my 450. And I don't have a stock frame to test them on...but if pumashine is willing. I would send these to him for reproduction. This set I've had on that quad for 5 years and their just starting to wear.
Title: I am just testing the site for pics
Post by: Pumashine on July 04, 2013, 10:57:40 AM: I believe we want to stay with aluminum. The UHMW is light and I cut this stuff for hours on the waterjet. The plated steel ones might look stronger but I think the point is to just keep junk from derailing the chain. That aluminum front one is real cute. In real life on a 250r its going to be much larger. It is much more economical to build than the wing design we all have by Honda.
Title: I am just testing the site for pics
Post by: Pumashine on July 04, 2013, 12:55:48 PM: Quote from: Rupp250;293
Hmmm I like that front sprocket guard. Possibly make one that replaces the washer/bolt setup.
Don't be ridiculous, that will never work!!!!!!
(http://i42.tinypic.com/27wxds0.jpg)
Something like this?
(http://i41.tinypic.com/2epn3tu.jpg)
Title: I am just testing the site for pics
Post by: etccb on July 04, 2013, 01:04:15 PM: Cool tony.
Title: I am just testing the site for pics
Post by: jcs003 on July 04, 2013, 01:06:52 PM: you got the idea puma. i love UHMW its light and durable. aluminum is also a great idea. i am just so brutal on parts, as im sure we all are and i hate paying hundreds for something i will break and need to replace for a reasonable price. plus, i hate standard swingarm skids. they always get hung up and rip bolts from the machine.

john
Title: I am just testing the site for pics
Post by: Rupp250 on July 04, 2013, 02:28:30 PM: Are they on the site yet?? Make them and I will buy. Oh and I think you need to take that one back to the polisher, slacker.