TRX250R.ORG

Site Sponsors => Pumashine 250R Products => Topic started by: Pumashine on July 05, 2013, 10:16:11 AM

Title: Gusset Kits
Post by: Pumashine on July 05, 2013, 10:16:11 AM

All items can be purchased here: Gusset Kits (http://www.tlr-online.com/trx250r/gusset_kits)

You can view how to install pictures here: https://www.forums.trx250r.org/index.php?action=dlattach;topic=4525.0;attach=2426

Title: Gusset Kits
Post by: Hawaiiysr on August 29, 2014, 12:42:11 PM

The replacement lower mounts are great. I would grind off the originals and install weld in the pumashine mounts regardless if the originals are still good. The new metal is thicker. Seeing that out frames are 20 something years old all of our lower motor mounts are ovaled to some degree.

My subframe was cracked and repaired by the previous owner. I also cracked the same repair. Cleaned up the area, welded in a pumashine subframe gusset and it has not given me a problem since. Same goes for the rear fender mount area.

Tony's gusset kits breath life back into out frames. The next best thing to a aftermarket frame is a well guesseted frame.

Title: Gusset Kits
Post by: Pricecheck on November 03, 2014, 10:09:11 PM

On top of all of this greatness offered, Tony shipped it out to Alaska and within a few days it arrived here! I can't wait to get her all welded up.


Sent from my iPhone using Tapatalk

Title: Gusset Kits
Post by: jamieg45 on September 09, 2015, 08:06:37 AM

tony do you make the pieces for the front motor mounts on a 87-89 frames. Need to replace both of them on each side. If needed I will post pics of what I need.

Title: Gusset Kits
Post by: jamieg45 on September 22, 2015, 08:24:39 PM

Thanks tony, the boys are getting a few R's and the need some minor repairs.

Title: Gusset Kits
Post by: dirtygerman on June 04, 2016, 06:26:56 AM

Thank you for the high quality product!  I will post some pictures after I am done welding the guesset kit in place.  I was very pleased to see it wasn't just a laser or water table cut plate kit the bend on the shock tower reinforcement square tube was bent with knowledge of seam strength placement on a bend!

Title: Gusset Kits
Post by: dirtygerman on October 31, 2016, 05:49:00 PM

(http://forums.trx250r.org/vbulletin_imports/1785_8309_2017-04-18_1328.jpg)(http://forums.trx250r.org/vbulletin_imports/1785_8188_2017-04-18_8861.jpg)Thanks again for the great product!  I just ordered a front motor mount set from you Friday I should be getting my frame and other misc parts back from powder coating later this week.  I am so excited!