TRX250R.ORG

Site Sponsors => Pumashine 250R Products => Topic started by: Pumashine on July 05, 2013, 10:22:35 AM

Title: Engine Stands
Post by: Pumashine on July 05, 2013, 10:22:35 AM: All items can be purchased here: TRX250R - Engine Stands (http://www.tlr-online.com/trx250r/engine_stands)
Title: Engine Stands
Post by: Pumashine on July 05, 2013, 10:23:48 AM: TRX250R Engine Stand - Aluminum
Engine Stand
Made out of 5052 Aluminum, .125 Thick
Light Duty - Mainly for Engine Storage
Includes 3 Bolts/Nuts
Honda Logo cut out
Can stand alone, be attached to a desk or a work bench

(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/125alumstand.jpg)

TRX250R Engine Stand - Aluminum w/Base
(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/125alumstandwithbase.jpg)

Engine Stand
Made out of 5052 Aluminum, .125 Thick
Light Duty - Mainly for Engine Storage
Includes 3 Bolts/Nuts
Honda Logo cut out

Base
Made out of Polished Diamond Plate, .063 Thick
Includes Bolts/Wing Nuts
Title: Engine Stands
Post by: Pumashine on July 05, 2013, 10:24:54 AM: TRX250R Engine Stand - Steel
Engine Stand
Made out of Steel, .125 Thick
Heavy Duty - Used for Storage or to Perform Engine Work
Painted with Metallic Silver Polyurethane to Prevent Rusting
Includes 3 Bolts/Nuts
Honda Logo cut out
Can stand alone, be attached to a desk or a work bench

(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/125steelstand.jpg)

TRX250R Engine Stand - Steel w/Base
(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/125steelstandwithbase.jpg)

Engine Stand
Made out of Steel, .125 Thick
Heavy Duty - Used for Storage or to Perform Engine Work
Painted with Metallic Silver Polyurethane to Prevent Rusting
Includes 3 Bolts/Nuts
Honda Logo cut out

Base
Made out of Polished Diamond Plate, .063 Thick
Includes Bolts/Wing Nuts
Title: Engine Stands
Post by: Pumashine on July 05, 2013, 10:25:51 AM: TRX250R Engine Stand - Stainless Steel - Polished
Engine Stand
Made out of #8 Stainless Steel, .105 Thick
Heavy Duty - Used for Storage or to Perform Engine Work
Polished on Both Sides
Includes 3 Bolts/Nuts
Honda Logo cut out
Can stand alone, be attached to a desk or a work bench

(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/1058stand.jpg)

TRX250R Engine Stand - Stainless Steel w/Base - Polished
(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/1058standwithbase.jpg)

Engine Stand
Made out of #8 Stainless Steel, .105 Thick
Heavy Duty - Used for Storage or to Perform Engine Work
Polished on Both Sides
Includes 3 Bolts/Nuts
Honda Logo cut out

Base
Made out of Polished Diamond Plate, .063 Thick
Includes Bolts/Wing Nuts
Title: Engine Stands
Post by: Pumashine on July 05, 2013, 10:26:46 AM: TRX250R Engine Stand - Steel
Engine Stand
Made out of Steel, .125 Thick
Heavy Duty - Used for Storage or to Perform Engine Work
Painted with Metallic Silver Polyurethane to Prevent Rusting
Includes 3 Bolts/Nuts
TRX250R & Honda Wing cut out
Can stand alone, be attached to a desk or a work bench

(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/standpics003.jpg)

TRX250R Engine Stand - Steel w/Base
(http://i1020.photobucket.com/albums/af328/TLR-Online/Parts/standpics005.jpg)

Engine Stand
Made out of Steel, .125 Thick
Heavy Duty - Used for Storage or to Perform Engine Work
Painted with Metallic Silver Polyurethane to Prevent Rusting
Includes 3 Bolts/Nuts
TRX250R & Honda Wing cut out

Base
Made out of Polished Diamond Plate, .063 Thick
Includes Bolts/Wing Nuts
Title: Engine Stands
Post by: tcoop474 on July 25, 2013, 09:27:30 AM: Just ordered me a engine stand :)
Title: Engine Stands
Post by: JoePA on July 25, 2013, 09:36:49 AM: These stands are AWESOME!!! Best money ever spent. I didn't think I would use it that much but holy crap, I could use 3!!
Title: Engine Stands
Post by: Pumashine on July 25, 2013, 09:46:03 AM: Redred55 bought 3 extra sets of the aluminum just for motor storage. Hate have to slide them around on the oil drain plug.
Title: Engine Stands
Post by: troybilt on July 25, 2013, 11:50:27 AM: All motor's I've sold and shipped are shipped with one as well. I love them!! I've still got the prototype polished stainless one on my wall!! I want do draw up a 450r one as well sometime...
Title: Engine Stands
Post by: etccb on July 25, 2013, 11:57:59 AM: No engine should be stored without one.....
Title: Engine Stands
Post by: Tbone07 on July 25, 2013, 12:34:31 PM: I'll never work on or assemble another engine without one of these stands. Complete life saver
Title: Engine Stands
Post by: jamieg45 on August 20, 2013, 09:57:49 PM: Hey can you cut the Honda logo in the stainless version also, I see the last pic of the steel one is that way.
Title: Engine Stands
Post by: Pumashine on August 20, 2013, 10:33:40 PM: Quote from: jamieg45;9368
Hey can you cut the Honda logo in the stainless version also, I see the last pic of the steel one is that way.

You mean the Honda Wing with the TRX250r? Yes. I have them but they are $10 more than the standard Honda logo. I must not have got a pic to Trevor for that one. Let me take a pic tomorrow
Title: Engine Stands
Post by: jamieg45 on August 20, 2013, 11:03:51 PM: Thanks tony, I will start saving for one then.
Title: Engine Stands
Post by: RIDE-RED 350r on August 21, 2013, 01:01:53 PM: I bought one of these as the site was launching... Great products from the Pumashine shop! Thanks Tony! :)
Title: Engine Stands
Post by: Pumashine on August 21, 2013, 01:46:22 PM: I don't remember why this is not on the site. Must have not been double polished at the time.
(http://i44.tinypic.com/1zc08c5.jpg)

(http://i41.tinypic.com/21kikh2.jpg)
Title: Engine Stands
Post by: Pumashine on February 14, 2014, 03:53:28 PM: Here's what I have been working on end of January beginning of February. The ones closest are the .ORG stands. There will be a drawing for 2 lucky members as soon as these are finished. I spent 12 hours programming the new ATC version. The old version is in the back. Lost the programs last year. This set is free if someone wants to pay $15 for shipping and mounting bolts. One side is bent, as it had a motor on it that was dropped. Considering sending a couple sets to our member Powderillusions for some sweet PC. Anyone interested in a certain PC can ask now.
(http://i58.tinypic.com/30nktjo.jpg)
Title: Engine Stands
Post by: jcs003 on February 14, 2014, 04:31:44 PM: i will buy the bent one since im cheap. money sent with a couple extra dollars/ thanks

john
Title: Engine Stands
Post by: 86-250rbuild on February 15, 2014, 02:32:47 AM: Very nice . Do you still have the old sets available .
Title: Engine Stands
Post by: havinnoj on February 15, 2014, 10:40:19 AM: Sweet stands here!!
Title: Engine Stands
Post by: Pumashine on February 15, 2014, 01:37:40 PM: Quote from: 86-250rbuild;25609
Very nice . Do you still have the old sets available .
These are 4 styles of the steel stands. The aluminum and stainless are run separately.

After deburring the stands with a standard belt sander they are run through a deburring machine which this one is called a Timesaver. Its a 2 foot wide sander with the belt on top. Parts are fed in 2 at a time
(http://i61.tinypic.com/okc0i1.jpg)
Coming out the other side.
(http://i62.tinypic.com/8vrkv6.jpg)
This deburrs the letters on the inside of the part. Cleans any dirt/oil off the parts and gives a brushed finish.
(http://i59.tinypic.com/2ds390x.jpg)
Next the parts are formed before painting.
Title: Engine Stands
Post by: Powderillusions on February 15, 2014, 06:36:46 PM: Oh thats awesome -- automatic De-burring, BIG time time saver!!
Title: Engine Stands
Post by: Pumashine on February 17, 2014, 12:24:14 PM: Quote from: spiritaces;25656
Frickin sweet!!! .org engine stands!!!
Little error in letter placement on the .org stands. The cut outs go too far into the bend area. You can see in the pic.

(http://i59.tinypic.com/k00dop.jpg)

So I moved the letters over and ran a couple more. I made a set for PDX Bigfoot Jason you can see in the rear.

(http://i62.tinypic.com/1zz74if.jpg)
Title: Engine Stands
Post by: rablack21 on February 17, 2014, 12:56:44 PM: Me likey....da shiny!
Title: Engine Stands
Post by: Pumashine on February 17, 2014, 02:46:27 PM: Quote from: rablack21;25840
Me likey....da shiny!
The shine will disappear with a few coats of paint. Were ready to paint.
(http://i58.tinypic.com/33u95zm.jpg)
Title: Engine Stands
Post by: Morse250r on February 17, 2014, 08:13:20 PM: Looks good tony!
Title: Engine Stands
Post by: Piney0 on February 24, 2014, 02:05:05 PM: I put my engine in the engine stand yesterday, and wanted to say the engine fits better in the stand than it does in the frame! Just dropped engine on the stand and all bolt holes were aligned without any fuss! I couldn't be any happier.
Title: Engine Stands
Post by: 86-250rbuild on March 02, 2014, 05:33:44 AM: Cant wait Too get mine.
Title: Engine Stands
Post by: rsss396 on March 02, 2014, 10:10:37 AM: anybody that does not have one because they dont think they would use it, is missing out!
They are very handy have around even if you only use it during rebuilding your chassis or assembling the topend of the motor.

Thanks Tony these are awesome!
Title: Engine Stands
Post by: Pumashine on March 21, 2014, 09:15:51 PM: Quote from: spiritaces;29534
You ever get the .org stands done yet?
Yep, got all the .org stands painted and ready to give away. Who wants one?
Title: Engine Stands
Post by: rk88r on March 21, 2014, 10:01:36 PM: I'll buy one.
Title: Engine Stands
Post by: Pumashine on March 21, 2014, 10:53:48 PM: Quote from: rk88r;29556
I'll buy one.
Jon and Ryan get there's for spending all their time improving this website. We are having a free drawing for 3 .org stands and 2 ATC stands that are being given away as a website promotion.
Title: Engine Stands
Post by: hickwheeler on March 21, 2014, 11:24:44 PM: so how do I put in for the free drawing.
Title: Engine Stands
Post by: Pumashine on March 22, 2014, 12:12:01 AM: Quote from: hickwheeler;29566
so how do I put in for the free drawing.
We have to start a thread and anyone who posts will be put in the drawing. We will be reaching out to FB and .net for new members beginning next week. Will give it 1 week and do the drawing Sunday night March 30. Will be posting in the chat box everyday. I know that will get the attention of all on .net as we cannot go there!
Title: Engine Stands
Post by: drtydzel on August 19, 2014, 09:38:07 AM: I didnt see the TRX250R.ORG ones on your site, are they still available for purchase? If so how much for the Heavy Duty Steel one with the base. I would like the sides in raw or unpainted if possible and the base in the polished diamond plate.
Title: Engine Stands
Post by: Pumashine on August 19, 2014, 10:00:04 AM: Quote from: drtydzel;41214
I didnt see the TRX250R.ORG ones on your site, are they still available for purchase? If so how much for the Heavy Duty Steel one with the base. I would like the sides in raw or unpainted if possible and the base in the polished diamond plate.
I did not put the .org stands for sale. There were 8 in all that I gave away as site promotion and to the site administrators. I would have to cut them for you if you want a set. They are $45 a set.
Title: Engine Stands
Post by: drtydzel on August 19, 2014, 11:00:22 AM: How much would that be with the base plate, and is the base always polished diamond plate?
Title: Engine Stands
Post by: Pumashine on August 19, 2014, 11:11:29 AM: Quote from: drtydzel;41224
How much would that be with the base plate, and is the base always polished diamond plate?
$45 for the stand and $10 for the baseplate. They are .080" thick aluminum diamond plate.
Title: Engine Stands
Post by: TRXjeeper on August 19, 2014, 11:24:11 AM: Nice work, what brand of water jet do you all have ?
Title: Engine Stands
Post by: Pumashine on August 19, 2014, 12:02:26 PM: Quote from: TRXjeeper;41227
Nice work, what brand of water jet do you all have ?
Jet edge is the brand, the software is sigmanest.
Title: Engine Stands
Post by: drtydzel on September 25, 2014, 05:33:13 PM: Just wanted show some of Pumashine's awesome work off this thing is nice. I almost want to build a nice motor and just use it as decoration but I'm not sure they will let me take it with when I move back to Japan.

(http://forums.trx250r.org/vbulletin_imports/687_3221_2017-04-18_2255.jpg)
Title: Engine Stands
Post by: Skeans1 on November 03, 2015, 09:33:23 PM: A black stand Tony did to give you guys an idea what it looks like.
(http://i68.tinypic.com/148hvma.jpg)
Title: Engine Stands
Post by: sameltoe on November 04, 2015, 07:49:48 AM: Wow! That Blue would look great with my spare! I might have to paint mine...
Title: Engine Stands
Post by: Robsessed86 on November 04, 2015, 07:53:39 AM: I've got to get a few of these after Christmas. Great craftsmanship. Plus these have been so needed for so long. Great idea Pumashine!!!
Title: Engine Stands
Post by: Robsessed86 on November 04, 2015, 07:55:47 AM: Plus its nice that your offering different options with aluminum, steel, ss. Keep the new 250r products coming. Never stop designing new stuff.
Title: Re: Engine Stands
Post by: Pumashine on May 14, 2017, 12:14:36 PM: Quote from: Robsessed86 on November 04, 2015, 07:55:47 AM
Plus its nice that your offering different options with aluminum, steel, ss. Keep the new 250r products coming. Never stop designing new stuff.

We have gone to a different color with the motor stands. The stands them selves are Cardinal Red Powder coat. The bases are thicker .080" aluminum powder coated black. I have new pics on the website along with the no logo models of aluminum and steel. These are for low cost storing and shipping. http://www.tlr-online.com/trx250r/engine_stands

Got pics of the ATC stand and you can see them here down towards the bottom. http://www.tlr-online.com/atc250r/8586_engine_stands