TRX250R.ORG
Workshop => Suspension and Chassis => Topic started by: rablack21 on September 09, 2013, 09:21:12 AM
-
Here are some pics of the reservoir clamps that pumashine made for me to fit my Custom Axis rezzies. They look alot better than the metal band clamps. Tony, you should add these to the for sale list!
Before Pic with metal band clamps:
[ATTACH=CONFIG]1792[/ATTACH]
After with new rezzy clamps:
[ATTACH=CONFIG]1793[/ATTACH][ATTACH=CONFIG]1794[/ATTACH][ATTACH=CONFIG]1795[/ATTACH][ATTACH=CONFIG]1796[/ATTACH]
-
Looks good!!
-
Those look Awesome and work as good as they look!!!
-
I was very happy with the fitment. I was worried about where the location of the adjustment knobs on the compression rezzies would end up, but I was able to twist them just a little bit to point out toward the sides, which was great! The knobs are easy to get to, the hoses are clearanced well away from the frame, the rezzies are still protected from impact, and opens up the cooling area a little bit for the radiator.
-
I always hated the look of a hose clamp on the rezzy's...
Awesome job Tony!
-
The frame upright is not square where these mount so they only go on one way. Had to make clearance for the little posts that are welded to the frame for the OEM nose cone. So the template is done. The C portion of the clamp is modified to fit your reservoirs. In time I'm sure we will get all the sizes figured out. Just need to know the diameter of your ressies. Preferably measured with a dial caliper.
-
Can you make some for the rear rezzy? I am probably going to remove the mounting brackets this winter in hopes of getting a clamp like this.
-
Can you make some for the rear rezzy? I am probably going to remove the mounting brackets this winter in hopes of getting a clamp like this.
I think a rear one would be pretty cool, especially for the aftermarket shocks so you could put the rezzi right above the pipe mounted on the upper frame tube just below the gas tank. My TCS rear shock was setup like that, but I had to use a metal band clamp instead.
-
For the Pep guys,I will have some piggy back clamps this week if Puma wanted to copy them. They aren't the actual Pep ones,just ones that somebody machined,but they will allow the rezzy to be mounted to the shock. I would still recommend the shorty hoses but Im sure they could be tucked/routed out of the way.
-
Awesome guys and great offer Eric on the clamps.
-
Stock rear resi/old peps 2.225".
-
And if puma wants to do some for round frames I can send him mine this fall/winter...