TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: Tbus93 on September 10, 2013, 11:11:52 PM

Title: Jetting my 310
Post by: Tbus93 on September 10, 2013, 11:11:52 PM

anybody recommend a good start point for my Jetting on my ESR 310 cylinder shortrod with 110 race gas dome on a 39mm pwk carb Standard TRX 5 Pipe and V Force 3 reeds 725 ft above sea level

Title: Jetting my 310
Post by: ledperformance on September 10, 2013, 11:44:32 PM

52 pilot, DEJ needle 4 clip position from top, main jet 175-178

Title: Jetting my 310
Post by: Tbus93 on September 10, 2013, 11:52:06 PM

appreciate the knowledge for a good starting point