TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: rough250r on September 12, 2013, 09:42:42 PM

Title: any one have a positive I.D on these
Post by: rough250r on September 12, 2013, 09:42:42 PM

Can any one help me out with a positive I.D on these a arms?  I'm looking to get a new set of bushings and some ball joints in the near future..thanks gents![ATTACH=CONFIG]1863[/ATTACH][ATTACH=CONFIG]1864[/ATTACH]

Title: any one have a positive I.D on these
Post by: jamieg45 on September 12, 2013, 11:31:27 PM

Are you happy with those bud or no.

Title: any one have a positive I.D on these
Post by: The Phantom on September 12, 2013, 11:54:46 PM

Almost look like LSR's to me but cant be positive.

Title: any one have a positive I.D on these
Post by: rough250r on September 13, 2013, 01:08:37 PM

As happy as I can be Jamie, there just sitting in my work bench at the moment though. God only knows when I'll have them on my machine and actually get to use them ! I figured I'd just get new hardware for them so i don't have to replace them later.. might as well do it now I suppose.
I guess I could email every a arm company a picture and say hey did you guys every make these? Haha

Title: any one have a positive I.D on these
Post by: rough250r on September 15, 2013, 07:23:09 AM

Any one else have a a opinion on what these may be?

Title: any one have a positive I.D on these
Post by: 89Longrod on September 15, 2013, 10:23:25 AM

Look like either LSR or Laegers std travel arms.

Title: any one have a positive I.D on these
Post by: Sky on September 15, 2013, 01:10:20 PM

Dont look like Laegers to me. Cross support on Laegers are arched round bar. May be jus the type I have

Title: any one have a positive I.D on these
Post by: rough250r on September 15, 2013, 10:30:43 PM

i have still yet to find a picture that shows some one else with arms like these.. the big kicker is that the bracket on the lower arms is square...
they almost look like housers,  with that bar cut off up near the bushing.. if you copy and paste that link it will show the set mine look close to..not a very good picture though.  there are no marks were some one cut those off and filled them.. ether it was done nicely( if it is that particular style)..or it is just and odd ball set .. the world may never know


http://www.racingquads.com/files/houser_standard_a_arms.jpg

Title: any one have a positive I.D on these
Post by: rough250r on September 15, 2013, 10:50:36 PM

i have still yet to find a picture that shows some one else with arms like these.. the big kicker is that the bracket on the lower arms is square...
they almost look like housers,  with that bar cut off up near the bushing.. if you copy and paste that link it will show the set mine look close to..not a very good picture though.  there are no marks were some one cut those off and filled them.. ether it was done nicely( if it is that particular style)..or it is just and odd ball set ..  now the world may never know


http://www.racingquads.com/files/houser_standard_a_arms.jpg