TRX250R.ORG

Classifieds => For Sale => For Sale - Parts => Topic started by: Deuce on July 06, 2013, 12:01:03 AM

Title: Custom Axis Shocks
Post by: Deuce on July 06, 2013, 12:01:03 AM

I have the following shocks for sale...

Axis rear shock for no link type setups.  17" center to center and set up for 180 lbs I believe (hard to tell since the numbers have faded and been rubbed off the springs).  Overall in good shape but should probably be freshened up because I am unsure of the time on it.  Biggest flaw is blemishing from rubbing on the reservoir can (see last picture).

$320 Shipped

(http://imageshack.us/a/img14/1193/bofx.jpg)
(http://imageshack.us/a/img607/335/u60u.jpg)
(http://imageshack.us/a/img577/7426/1kv8.jpg)

Title: Custom Axis Shocks
Post by: Deuce on July 06, 2013, 12:03:08 AM

First generation front shocks which were rebuilt recently with all new updated seal heads and are ready to rock. They are sprung and valved for 210 - 220 lbs mx on +3 arms. I had the work done by Colby at C&D racing. These have 0 hours on them since they were rebuilt and all I had them on was my 89 roller which never made it past that phase (I don't think I even torqued the bolts down when they were on).

$720 shipped through usps (usually will take only 3-4 days max to get from me to you)

(http://imageshack.us/a/img819/4961/pjdk.jpg)
(http://imageshack.us/a/img15/8420/8hza.jpg)
(http://imageshack.us/a/img836/2811/8pb0.jpg)

Title: Custom Axis Shocks
Post by: tretimit16 on July 09, 2013, 11:37:56 PM

I can't believe there's no takers... Ive seen these go on ebay for up to $900

Title: Custom Axis Shocks
Post by: Deuce on July 10, 2013, 01:13:20 AM

That makes two of us...

Title: Custom Axis Shocks
Post by: Tyler 54 on July 10, 2013, 02:39:41 AM

what length swing arm is the no link shock good for?

Title: Custom Axis Shocks
Post by: Deuce on July 10, 2013, 10:08:52 AM

If I recall correctly 17.5 - 18.5"  but she should be serviced anyway so get it set up for you while doing that

Title: Custom Axis Shocks
Post by: Deuce on July 12, 2013, 08:10:09 PM

Front shocks SOLD!!!!


Now lets get that rear shock moving

Title: Custom Axis Shocks
Post by: Tyler 54 on July 12, 2013, 08:29:37 PM

^^ Waiting to hear back about a swing arm....