TRX250R.ORG

General => Lounge => Topic started by: Rman on July 06, 2013, 01:34:23 AM

Title: Now (over here on .org) I can ask my questions!!
Post by: Rman on July 06, 2013, 01:34:23 AM

I have spoken to Arlan, Neil, and bdt about set ups/porting, and was satisfied with the courtesy and info they all three provided. Now my questions are this, who would you guys suggest I have port my 330 cylinder for dirt drag?? (not just out of the three places above, but out of ANYBODY) And who to port my next build (puma) for drag?? And why?? I have always built my own engines so all this custom work is new to me, any and all advice would be appreciated!

Title: Now (over here on .org) I can ask my questions!!
Post by: k10seibel on July 06, 2013, 03:04:54 AM

I would recommend Rob Selvy. He in particular if you get my drift.
Just my $.02 Good luck with your build! Feel free to PM if you care to.

Title: Now (over here on .org) I can ask my questions!!
Post by: dlunn on July 06, 2013, 06:31:57 AM

I was very satisfied with Neil and my mid range port that he did runs really good.  Neil also did a drag ported 6 mil for atvfan28 that is supposed to be very fast.

Title: Now (over here on .org) I can ask my questions!!
Post by: Polonda on July 06, 2013, 08:17:21 AM

I would recommend Pete at hybrid.  Especially for the Puma as he has built some very fast ones.  Tim at Titan and Packard are also great guys.  Give them a call and see what you think.  I have no experience with Neil's work p, but have heard great things.

Title: Now (over here on .org) I can ask my questions!!
Post by: rsss396 on July 06, 2013, 08:21:38 AM

stick to the drag guys if you are building a drag motor thats what they specialize in.

Hybrid,Packard,Titan,K&T,Shearer.............

Title: Now (over here on .org) I can ask my questions!!
Post by: motofool250r on July 06, 2013, 10:21:48 AM

if i wanted to be the fastest, i would talk to these guys Hybrid, Packard, Shearer, McCoy, K&T, Titan, maybe even LED almost likely in that order too. Niel makes some fast motors but i dont know if hes the best in the drag race motor arena. if you wanted a woods/tt/xc/MX motor Niel would be near the top of my recomendations

Title: Now (over here on .org) I can ask my questions!!
Post by: Rupp250 on July 06, 2013, 10:25:09 AM

X2 on what motofoolsaid, not exactly that order, but call and talk to them all and see how they make you feel.  You can also try Brandon at Wildcard Racing he is out of Utah.

Title: Now (over here on .org) I can ask my questions!!
Post by: Rman on July 06, 2013, 04:42:41 PM

Thanks for all the info guys, are all those guys/places as good with both cylinders?? The ESR and the PUMA??