TRX250R.ORG

General => Lounge => Topic started by: csides66 on October 15, 2013, 11:01:50 PM

Title: How many springs on a esr trx5 pipe?
Post by: csides66 on October 15, 2013, 11:01:50 PM

Like the title says how many springs does the esr trx5 pipe require?

Title: How many springs on a esr trx5 pipe?
Post by: broken1 on October 16, 2013, 12:17:30 AM

Don't know about cm pipes but the standard pipe takes 4. 2 to hold the pipe together & 2 to the exhaust flange.

Title: How many springs on a esr trx5 pipe?
Post by: PROX370R on October 16, 2013, 02:13:20 AM

it uses 4 on the trx5 center mount as well...

Title: How many springs on a esr trx5 pipe?
Post by: csides66 on October 16, 2013, 08:52:38 AM

Thank you!

Title: How many springs on a esr trx5 pipe?
Post by: Rupp250 on October 16, 2013, 10:09:12 AM

Also make sure your springs are not worn out. My pipe was pushing away from the flange. I only noticed it because I could watch while on the dyno.

Title: How many springs on a esr trx5 pipe?
Post by: csides66 on October 16, 2013, 11:35:25 AM

Quote from: Rupp250;14929

Also make sure your springs are not worn out. My pipe was pushing away from the flange. I only noticed it because I could watch while on the dyno.

I just bought new from esr... the trx5 pipe i just bought didn't have them.

Title: How many springs on a esr trx5 pipe?
Post by: Pumashine on October 16, 2013, 08:24:14 PM

Quote from: csides66;14938

I just bought new from esr... the trx5 pipe i just bought didn't have them.

They only ship the 2 that holds the pipe together.