TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: Tyler 54 on November 04, 2013, 06:53:31 PM

Title: alright long rod crank, long rod piston, ahort rod cylinder...HELP
Post by: Tyler 54 on November 04, 2013, 06:53:31 PM

I have the following to work with long rod crank, short rod cylinder and a long rod piston. Can this be made to work with a spacer plate???

Title: alright long rod crank, long rod piston, ahort rod cylinder...HELP
Post by: rsss396 on November 04, 2013, 07:00:22 PM

dont need a spacer, the piston is matched to the crank that is all that matters
they move the pin 5mm higher on the 87+ pistons because the rod is 5mm longer, the cylinder deck height is the same on all years

Title: alright long rod crank, long rod piston, ahort rod cylinder...HELP
Post by: Tyler 54 on November 04, 2013, 10:10:55 PM

Sweet, so I'm good to go. Thanks man!!!