TRX250R.ORG
Site Sponsors => Pumashine 250R Products => Topic started by: Pumashine on November 30, 2013, 11:28:23 AM
-
The resi clamps are made from 6061 Aluminum 1/2" thick. One side has a clearance hole for a 6mm bolt. The other side is tapped for the 6mm thread Honda uses on out quads. After fabrication the part is bead blasted for a consistent bare aluminum finish. So the surface is porous and perfect for paint color of your choice. Some sort of paint is recommended to help easily clean the surface down the road.If you like the natural look clear is a good choice. Most of you racing prefer flat black. If you want them polished you will have to let me know before ordering.
The ones below with the square OEM frame rectangular notches are designed for mounting up front between the shocks or behind the radiator. The ones with the round cutouts are for 1" aftermarket frames. You will have to measure your resi's to find out what size you need to order. So far the sizes cut are 1 15/16" or 50mm, 2" and 2 1/4". Not all resi's are the same from the same brand as well as different brands. So at this point it is best to measure your resi with a dial caliper if available and give me the dimension. Will also need to know what the frame tube size you are mounting to.
To keep these affordable the bare finished is offered a $10 a clamp. 2 clamps are recommended per resi. Shipping will be the flat rate box at $8
(http://i39.tinypic.com/1zc1xte.jpg)
-
VERY NICE TONY way to go . steping up an making parts for us .i am going to need some for a round tube frame soon. i will get back too you later an get some .
-
Sweet product! PM sent.
-
What you all have been waiting for Rear resi clamps. One member wants to get rid of his OEM clamp set up off the frame. So these will take the place of them on the OEM frame.
(http://i39.tinypic.com/e5p85h.jpg)
A side view to show how they line up with existing OEM set up.
(http://i42.tinypic.com/29vl36f.jpg)
Then there are the after market frames made with 3/4" tubing do these were developed. And maybe the 3 wheeler frames.
(http://i39.tinypic.com/2v9q6b6.jpg)
-
I desperately need that for my OEM frame OEM rear resi. When I powder coated my frame I stripped all the OEM brackets off thinking I could easily find a clamp. Wasn't so easy so now I have rubber and two zip ties for a resi clamp.
-
I desperately need that for my OEM frame OEM rear resi.
I always build an extra set when doing the first run so I got you covered. At first I though who the heck would ever take these off. Then I remembered my brother one day cutting everything off with the intention of making it lighter. I am sure others have been damaged or broken. In time I am sure to have a stock of everything everyone needs.
-
Got mine in yesterday! Great product and Great fitment. Mine were installed on an 85 ATC R that has the round tube frame.
Worked great and looks awsome.
Thank you Sir!
-
I'm going to measure up my 450r frame, I think this will work for my Axis front shocks. Nice work Tony!
-
Rear resi clamp installed on OEM frame.
(http://i44.tinypic.com/raywxx.jpg)
-
When r these going up for sale. Need two for the rear pretty bad.
-
When r these going up for sale. Need two for the rear pretty bad.
I have an extra set of the size shown above for stock frame with stock resi.Its too early to put them on the site. I have made 10 different sizes so far. Just PM me what size you need and your paypal address and I will send you an invoice. You can pay whenever you get the funds or go a different route. I know what size the stock ressi's are but each brand uses a different mold. Some brands even has 3 different sizes for different applications. Clamps are $10 each and $7 to ship. The set pictured above was $27 shipped.
-
Slick Tony. Thank you for all your hard work.
-
(http://forums.trx250r.org/vbulletin_imports/42_668_2017-04-18_858.jpg)
Here are the OEM frame OEM shock rezzi clamps. Fit great look great. Thanks puma.
-
I would like to order a pair of these. Plese let me know how I can go about it. I am local, here in Eugene, so it would be easy and convenient! The sooner the better. Thanks
-
I would like to order a pair of these. Please let me know how I can go about it.
Just have to measure your resi diameter to know what size to cut. Thr jet was down for awhile but its back up to spec. I have 3 existing orders and usually cut as many as possible in a run.
-
Measure the diameter of the resi and let me know how many you want.
-
Tone - My works rezzies are 1.822in diameter. I'll need 4 clamps.
-
Tone - My works rezzies are 1.822in diameter. I'll need 4 clamps.
Great, they are now cut and I will finish them tommorrow.
-
Awesome
-
Tony, just checking in to make sure I didn't miss a message or something.
-
Tony, just checking in to make sure I didn't miss a message or something.
February was so freakin busy I have not had time to get all the orders done. I work 50 hours a work and do this stuff in my spare time. I will try to finish tomorrow.
-
Take ur time man. 2 feet of snow on the ground. I aint riding any time soon.
-
Tony,
Can I get 4 of the clamps?
Stock TRX 86' Frame
PEP Shocks Resi Clamps - 57.20mm
What is the paypal address to send payment?
PumaRocks@Comcast.net (PumaRocks@Comcast.net)
-
Hey Tony can I get some clamps to mount my rear custom axis resi on the frame rail behind the radiator?
(http://i603.photobucket.com/albums/tt116/Allison55/Mobile%20Uploads/image_1.jpg) (http://s603.photobucket.com/user/Allison55/media/Mobile%20Uploads/image_1.jpg.html)
-
No?
-
I'm still waitin too.
-
No?
I have got to get the older orders finished up first before I jump ahead. I have done those ones you would like in the pic. Not a problem. The water jet is a high maintenance machine. Its broke down more than it works. I will get Mikes shipped and you and the next guys started. Must be 10 guys on FB that are waiting. I work on members stuff first. Members here are high priority.
-
Thanks Tone
-
Thanks Tone
I found yours on the milling machine. Don't remembers whos are finished in the bead blast cabinet
-
Nice!
-
I have got to get the older orders finished up first before I jump ahead. I have done those ones you would like in the pic. Not a problem. The water jet is a high maintenance machine. Its broke down more than it works. I will get Mikes shipped and you and the next guys started. Must be 10 guys on FB that are waiting. I work on members stuff first. Members here are high priority.
Okay just let me know. Can I get mine without bead blast so I can polish them?
-
I found yours on the milling machine. Don't remembers whos are finished in the bead blast cabinet
Any chance they could be for me? I asked about getting a set that are 55mm in diameter and bolt up to an oem subframe.
-
Any chance they could be for me? I asked about getting a set that are 55mm in diameter and bolt up to an oem subframe.
Yep, they are the OEM subframe size. Thanks for letting me know. Handling orders from here and FB drives me nuts sometimes. They are ready to ship!
-
Hey Tony can I get some clamps to mount my rear custom axis resi on the frame rail behind the radiator?
I can make them to fit on those uprights but I need your resi diameter to proceed.
-
Okay just let me know. Can I get mine without bead blast so I can polish them?
I can make them to fit on those uprights but I need your resi diameter to proceed.
Resi diameter is 2.0" and frame rail is 0.90" thanks
-
Nice!
Yours are finished
-
Sweet. PM me the paypal info.
-
Okay just let me know. Can I get mine without bead blast so I can polish them?
Yep, no bead blast and they are ready to ship. Please PM your paypal address so I can send an invoice. Thanks, Tony
-
guys these clamps are top notch quality! well worth the little wait imho!
-
(http://i537.photobucket.com/albums/ff335/dem3500/TRX250R/IMG_20150126_194639411_HDR_zpsrbny2gci.jpg) (http://s537.photobucket.com/user/dem3500/media/TRX250R/IMG_20150126_194639411_HDR_zpsrbny2gci.jpg.html)
(http://i537.photobucket.com/albums/ff335/dem3500/TRX250R/IMG_20150126_194632932_zpsn9roeumq.jpg) (http://s537.photobucket.com/user/dem3500/media/TRX250R/IMG_20150126_194632932_zpsn9roeumq.jpg.html)
-
Tony,
Can I get 4 of the clamps?
Stock TRX 86' Frame
PEP Shocks Resi Clamps - 57.20mm
What is the paypal address to send payment?
pumarocks@comcast.net (pumarocks@comcast.net)
Yep, got these made over the weekend. 4 clamps at $10 each plus $6 shipping is $46 to the email address above.
-
I need some more clamps. You made me some for the OEM ressi on sub frame. Now I put my new shock on and it has the ressi up front. The old clamps fit the elka ressi bit not the frame. U can see in the picture it's mounted to the down tube behind radiator. (http://forums.trx250r.org/vbulletin_imports/42_6702_2017-04-18_661.jpg)
-
I need some more clamps. You made me some for the OEM ressi on sub frame. Now I put my new shock on and it has the ressi up front. The old clamps fit the elka ressi bit not the frame. U can see in the picture it's mounted to the down tube behind radiator.
No problem on that location but I do need the resi diameter to make the sets.
-
No problem on that location but I do need the resi diameter to make the sets.
These are for a rear elka shock. The rear OEM ressi and rear Elka ressi are the same diameter. I put the clamps you made for me for the OEM rear around the rear Elka ressi and it fits perfectly.
-
These are for a rear elka shock. The rear OEM ressi and rear Elka ressi are the same diameter. I put the clamps you made for me for the OEM rear around the rear Elka ressi and it fits perfectly.
Am I supposed to remember what size those were? :rofl: I build hundreds of parts every day with thousands of different dimensions each job. The stock resi's are around 2.250"
-
:rofl::rofl:
Am I supposed to remember what size those were? :rofl: I build hundreds of parts every day with thousands of different dimensions each job. The stock resi's are around 2.250"
Where's your cheat sheet :rofl:
-
Am I supposed to remember what size those were? :rofl: I build hundreds of parts every day with thousands of different dimensions each job. The stock resi's are around 2.250"
Well I didn't expect that you would remember my clamps but I did expect you would remember the OEM ressi size as the first time you made them you knew the OEM size. I figured it would be the same this time. My ressi is 2.245". Thanks
-
Are you still making the resi clamps for a stock frame?
-
Are you still making the resi clamps for a stock frame?
I will be making one last run so I can build a set for [MENTION=6]atv fan 28[/MENTION]
-
I will take 6 if you can do that...you just need my resi size?
Sent from my E6782 using Tapatalk
-
I will take 6 if you can do that...you just need my resi size?
Yes sir. Use a dial caliper if available
-
I will take 6 if you can do that...you just need my resi size?
Yes sir. Use a dial caliper if available
So this guy wants clamps made and never gives me the cut size. I am so tired of the important people (in their minds) and the equally stupid peeps on face book I cannot make these anymore. Now if your are a real member here just send me the resi diameters and we will get stuff done! For example
The message they sent you was:
I'm needing two clamps both for a stock frame. I'll get sizes for you sometime today. But wanted to be sure you would want to make them.
Thanks,
Gene
-
If there are any members here would like resi clamps, let me know so we can get an order going.
-
Tony you still up for making clamps? I need 2 for some works, and my buddy needs 2 as well for his works. I can get you specs in a bit if you are interested.