TRX250R.ORG

Site Sponsors => Pumashine 250R Products => Topic started by: mrmoto on July 07, 2013, 01:09:44 PM

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: mrmoto on July 07, 2013, 01:09:44 PM

Do these fit the ATC 250R? http://www.tlr-online.com/trx250r/oem_replacement

http://tlr-online.com/yahoo_site_admin/assets/images/14tna7k.75140945_std.jpg

I know the OEM's are interchangeable but want to be 100% sure

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: Pumashine on July 07, 2013, 01:27:01 PM

Quote from: mrmoto;1449

I know the OEM's are interchangeable but want to be 100% sure

I copied trx OEM from hole to hole. Spacers are provided for the other direction.

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: mrmoto on July 07, 2013, 01:29:21 PM

Sounds good to me. Buying the set now. thanks man!!

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: Fire1 on July 07, 2013, 01:34:15 PM

Very nice as soon as I know what silencer I'm going to end up with one or two holes I'm going to order a set.

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: Pumashine on July 07, 2013, 01:40:11 PM

All sales go back into paying for this site. Thanks to the .org 250r brethren. Tony

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: mrmoto on August 06, 2013, 06:49:12 PM

Follow up: No Joke, these hangers worked absolutley perfect for my 1985 OEM cylinder/Billet flanged ATC250r with a PT Hi Rev/Fatboy 2. The only thing I did was grind about .020" off the spacer for the front mount. My PT fits just perfect. I am completely stoked with these hangers!:ride:

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: Pumashine on August 06, 2013, 07:43:31 PM

Thanks guys. The spacers may need to be shortened or sometimes add a couple washers. Best fit is what you need. I will offer some adjustable mounts a little later for those hard to fit PT and other aftermarket pipes.

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: mrmoto on August 06, 2013, 09:46:50 PM

The spacers and washers give you a lot of flexibility. Like with mine. 1 simple 10 second adjustment and all is perfect. As we all know there are a ton of different pipes out there and none fit the same. Being able to make a quick adjustment is very important. The OEM hangers have no flexibility at all.

Title: Pumashine/TLR Exhaust Hanger ATC Fitment
Post by: Fire1 on August 28, 2013, 08:18:09 PM

Here's the rear on ATC . Super fast shipping thanks
(http://i399.photobucket.com/albums/pp71/fire1man2008/20130828_200032_zps1129d846.jpg)