TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: Quinnlt4 on December 06, 2013, 05:58:04 PM

Title: A arm bushing removal
Post by: Quinnlt4 on December 06, 2013, 05:58:04 PM

I have an older style Laeger a arms and I am having trouble removing the bushing, my LSR a arms fall right out. Are the Laegers pressed in or just being stubborn? Looking for some tips or tricks before I get to aggressive and ruin them.
Thanks
Chad

Title: A arm bushing removal
Post by: sameltoe on December 06, 2013, 06:16:50 PM

I'm kinda cheap and don't have a press...so I used a socket an extension washers nuts and a long bolt lol

Title: A arm bushing removal
Post by: jamieg45 on December 06, 2013, 08:26:06 PM

I use a vise and sockets on one side so the sleeve can come out and the socket that is the exact same size to push it out and then I have a special tool that fits in the hole and opens up and a slide hammer to pop them out.

Title: A arm bushing removal
Post by: Quinnlt4 on December 07, 2013, 04:44:02 AM

Ok. Thank you