TRX250R.ORG

General => Pics and Vids => Topic started by: havinnoj on December 30, 2013, 12:03:25 AM

Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 12:03:25 AM: Picked up this 1989 framed trx250r today to add to the stable. I'm planning to use this as a foundation for a new build this summer.

Stock frame and front end, pro-x esr powervalve 310, pwk carb, boyseen reeds, hinson clutch and quick change cover, esr pipe and silencer, +8 swigarm, Lonestsr axle, LSR antifade, LSR carrier, 10p extremes, ims pegs, lots of chrome, etc.

Came with a bunch of other used parts. Hasn't been ran in a few years but fires right up.

(http://forums.trx250r.org/vbulletin_imports/87_89_2017-04-18_5101.jpg)
(http://forums.trx250r.org/vbulletin_imports/87_87_2017-04-18_4093.jpg)
(http://forums.trx250r.org/vbulletin_imports/87_88_2017-04-18_5685.jpg)
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 12:12:43 AM: Quote from: spiritaces;20936
She looks good!! Some nice go go stuff there! This isn't that one from CL a week or two back?

I found this one on Craigslist but it wasn't the stock one in Eugene close to Tony. This one does have some red race cut oem front fenders. One side has some decent cracks but the otherwise and hood are good. Not sure if that would be of interest to ya Jon.
Title: 1989 Dune 250R in the Stable
Post by: atv fan 28 on December 30, 2013, 12:16:22 AM: I likey!!!
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 12:21:04 AM: Quote from: atv fan 28;20938
I likey!!!

Thanks man. It came with a billet set of a-arms, spindles, tie rods, etc - looks pretty slick. I'll probably sell it so if you know anybody interested send em my way!
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 12:21:48 AM: Quote from: spiritaces;20939
Let me know what they look like. I got a set of oem race cuts now and one side has a broken mount and I could use a diff hood

I'll shoot ya some pics tomorrow Jon
Title: 1989 Dune 250R in the Stable
Post by: broken1 on December 30, 2013, 01:49:03 AM: I saw this R on the local cl. Congratulations on the score, it's always nice seeing these bike's being purchased by fellow members & not by sap's that wouldn't know what to do with them.
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 11:09:28 AM: Quote from: broken1;20946
I saw this R on the local cl. Congratulations on the score, it's always nice seeing these bike's being purchased by fellow members & not by sap's that wouldn't know what to do with them.

Thanks man. Now I'm just looking for a day with nice weather to take it down to the dunes!
Title: 1989 Dune 250R in the Stable
Post by: Pumashine on December 30, 2013, 11:57:52 AM: Looks nice, like it has already been redone. Great start for what you are building?
Title: 1989 Dune 250R in the Stable
Post by: Greg Huntley on December 30, 2013, 12:01:18 PM: Wow nice quad, Motor looks clean! She run strong?
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 12:09:11 PM: Quote from: Pumashine;20959
Looks nice, like it has already been redone. Great start for what you are building?

It needs more motor, suspension, and shiny stuff! Since I'll be down in Miami until mid-May, the major rebuild will be a ways out.

Quote from: Greg Huntley;20960
Wow nice quad, Motor looks clean! She run strong?

I picked it up yesterday so haven't had a chance to really run it. The motor is a old style ESR PRO-X 310 PV with stock ignition. I'm waiting on a CR mounting plate from ESR to show up so I can throw in a CR250 ignition.
Title: 1989 Dune 250R in the Stable
Post by: Pumashine on December 30, 2013, 12:15:38 PM: Quote from: havinnoj;20961
I'm waiting on a CR mounting plate from ESR to show up so I can throw in a CR250 ignition.
Are you going with the 02-07?
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 12:29:45 PM: Quote from: Pumashine;20962
Are you going with the 02-07?

No - I just saw the 07 last week. I have a full 01 CR250 just waiting on the mount.
Title: 1989 Dune 250R in the Stable
Post by: fast350r on December 30, 2013, 12:32:19 PM: nice buy,,, very clean bike
Title: 1989 Dune 250R in the Stable
Post by: JasonB on December 30, 2013, 12:51:56 PM: clean TRX! nice find
Title: 1989 Dune 250R in the Stable
Post by: red88r on December 30, 2013, 07:04:14 PM: Nice find! That baby looks clean!
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 09:23:40 PM: Thanks guys. Pulled the Pyramid reed cage and reed spacer off today. Forgot what a pain the Boyseen setup is with a open air filter. Think I'm going to sell those reeds and put V-Force's with a UPP intake. If anyone wants the Boyseen reeds, shoot me a PM.
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 30, 2013, 09:53:33 PM: Quote from: spiritaces;21002
Is it a rad valve?

Yes I believe so Jon.. Besides replacement reeds, did they make another type of reed cage/valve assembly?
Title: 1989 Dune 250R in the Stable
Post by: Sand_Blaster on December 31, 2013, 06:52:19 PM: He wanted alot for it were you able to talk him down at all?
I was always eyeing that one every so often.
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on December 31, 2013, 07:38:30 PM: Quote from: Sand_Blaster;21067
He wanted alot for it were you able to talk him down at all?
I was always eyeing that one every so often.

Yeah he came down quite a bit. It was a good buy for what I plan on building.
Title: 1989 Dune 250R in the Stable
Post by: Sand_Blaster on December 31, 2013, 11:47:34 PM: I'll take the rear swing arm & rear tires if your willing to part with them.
Title: 1989 Dune 250R in the Stable
Post by: ACampbell on January 01, 2014, 02:36:43 AM: Nice looking quad. I think I spoke to the previous owner and he spent quite a bit of time and money on the build
Title: 1989 Dune 250R in the Stable
Post by: jamieg45 on January 01, 2014, 11:24:32 AM: Nice buy and nice bike man.
Title: 1989 Dune 250R in the Stable
Post by: havinnoj on January 01, 2014, 07:02:45 PM: Quote from: Sand_Blaster;21085
I'll take the rear swing arm & rear tires if your willing to part with them.
I'm not planning to get rid of those but will let you know if I do.

Quote from: ACampbell;21090
Nice looking quad. I think I spoke to the previous owner and he spent quite a bit of time and money on the build
Thanks. He definitely put some money into the build.

Quote from: jamieg45;21102
Nice buy and nice bike man.
Thanks man.