TRX250R.ORG

General => Pics and Vids => Topic started by: BVCRacing.com on January 10, 2014, 12:28:00 PM

Title: My Project 250R Build Pics and Mod list
Post by: BVCRacing.com on January 10, 2014, 12:28:00 PM: It's amazing how some people don't know what these are....
This frame and pile of parts was found on craigslist, at a storage facility. They had it sitting outside in a pile...
I consider this "rescued" as it was going to be thrown away...

We went through and did a complete restoration... See the following pics :-)

This just shows what you can do with a 1986 frame.

All Products are Items that i sell through my store , We are an ESR dealer also.

Everything was powder coated , repaired, modified and built in-house @ BVC Racing / Project250r

Here is a list of Products we added to this bare frame that we started with:

ENGINE

ESR 310 Cylinder kit
ESR TRX7 pipe
ESR "new" Silencer
ESR exhaust flange
ESR Base spacer
Hot rod "long rod" Crank
Hot Rod crank bearings/seals
Boyesen Reeds
Keihin A/S 38mm Carb
UPP Oversize intake boot
Vesrah Clutch plates
UNI air filter
Outerwear

CHASSIS - SUSPENSION - COSMETIC

LSR axcalibar pro Axle
LSR dual row carrier
LSR Antifade
LSR steering stem
Galfer wave rotor
Cannondale "moto" A-arms
Cannondale Spindles/calipers/hubs/brakes
Elka stage 3 front shocks
AC Racing bumper
AC Racing YFZ450 pro peg nerfs
DG Grab bar
Factory Effex Seat Cover
TM DESIGNS CHAIN SLIDER
MOOSE CHAIN BUFFER/PAD
TRX450R SHIFTER
MAIER oem style front/rear plastic
MAIER scoop hood
MAIER tank cover
PRO TAPER handle bars
PRO TAPER grips
MAXXIS RZR tires
ITP front wheels
400EX Rear wheels (powder coated)
Regina GOLD Chain
Project250r OEM replica graphics
CRF450R Front brake master cylinder
CRF450R / WC Red MC cover
Aluminum Air Scoops (ebay)
Billet exhaust hangers (ebay)
Motion Pro Clutch cable
Terry Cable Throttle cable
Steel Braided rear brake line

POWDER COATING BY PROJECT250R.COM

Frame
Swingarm
A-ARMS
F Hubs
R Hubs
Engine Cases
Engine Covers
Wheels

MISC SEALS / GASKETS / REPAIR PCS

K&L Rear MC Rebuild kit
K&L Caliper Rebuild kit
Cometic Gaskets
K&S engine seals

FUEL - OIL - LUBES

VP C-12
Amsoil Dominator
Bel-Ray Gear saver
Bel-Ray Water Proof Grease
Red Loc-Tite
Engine Ice Coolant

(http://www.project250r.com/v/vspfiles/assets/images/oldvsnew4.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/comingtogether.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/slidehammer.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/strippedcases.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/masked%20cases.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/powdercoatedcases.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/lsrparts.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/bottomend.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/bottomendframechain.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/esrparts.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/250rbikelift.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/finishedproduct.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/dougspose.jpg)
(http://www.project250r.com/v/vspfiles/assets/images/ridingdougs.jpg)
Title: My Project 250R Build Pics and Mod list
Post by: Trx250r on January 10, 2014, 10:03:28 PM: Never knew Cannondale arms would fit the R....nice R!!
Title: My Project 250R Build Pics and Mod list
Post by: jcs003 on January 11, 2014, 06:37:01 AM: nice build!

john
Title: My Project 250R Build Pics and Mod list
Post by: BVCRacing.com on January 11, 2014, 07:54:39 AM: Quote from: Trx250r;21980
Never knew Cannondale arms would fit the R....nice R!!

Yup, i was in process of parting out my cdale moto

Decided to give it a try. They pretty much copied honda
Title: My Project 250R Build Pics and Mod list
Post by: ryanowarrior on January 11, 2014, 03:52:44 PM: What did you use to cover the cases with? The green stuff in the pics
Title: My Project 250R Build Pics and Mod list
Post by: red88r on January 11, 2014, 05:59:36 PM: Yeah don't even give him a compliment first.....^^^^^:sign0157: All I can say is awesome job on saving that one from the scrap pile. And I know aftermarket frames are cool and I want one still......most of the time for most people a stock gusseted frame is all you need. If you can get by without spending money right away for a frame is a plus for me. Alot of respect for guys that run a stock frame yet.
Title: My Project 250R Build Pics and Mod list
Post by: bnau267 on January 11, 2014, 06:18:58 PM: I love that picture where it's just sitting there in front of the grassy knoll. Probably one of the coolest R pictures I've ever seen!
Title: My Project 250R Build Pics and Mod list
Post by: fastfail on January 11, 2014, 11:12:31 PM: I'm digging the pic of it on the lift, looks badass.
Title: My Project 250R Build Pics and Mod list
Post by: jamieg45 on January 13, 2014, 12:19:59 AM: Nice job great build and rescue from the scrap pile.
Title: My Project 250R Build Pics and Mod list
Post by: BVCRacing.com on January 15, 2014, 06:54:25 PM: thanks guys! will be upgrading to a LSR frame in the future.... for now i have another spare frame that ill be gusseting/powder coating. For the MX riding i do it will prob last a season... but i know it will eventually fail

and the stuff on the cases is green heat tape , it doesn't melt when baked in the oven... http://www.columbiacoatings.com