TRX250R.ORG
General => Pics and Vids => Topic started by: oldschool85250r on February 04, 2014, 08:09:39 PM
-
[video=youtube_share;cRALCRJPt6I]http://youtu.be/cRALCRJPt6I[/video]
It's not that fastest but it does pretty good for a trike
-
cool. trikes are a rare sight where i ride
-
Thats a fast stock cylinder
-
It's a stock cylinder but not a stock bore. It's set up pretty good. Hoping to run in the low 5s at the Bakersfield sand drags.
-
Very nice bro
-
I spotted a cameo in there.
Bako is gonna be over run with singles this year it seems.
-
We single cylinders are trying to give those 2 cylinders a run for their money. I think mine is going to shock a few people. Just hope I have some good runs
-
Very cool. Good luck at Bakersfield!
-
i managed to look closely at your card and cylinder , I see it is taped to run a pump, is it set up for alky?
-
No I'm running race gas in it.
-
thats a wicked stock cylinder, cool video!
john
-
Thanks I need to rebuild my rear shock or get another one. Stupid thing was like a pogo stick.
-
Sweet vid! Looks like you were cleaning up house there!
-
It was fun. I thought it ran good on Thanksgiving but we did a little more to it and now it gets up and goes
-
That is one hell of a fast trike!!! I was wondering the same thing about your rear shock.. Good luck at the drags!!
-
Kick ass, everyone knows real riders don't need training wheels!! lol. Unless your gonna up grade to a works or other aftermarket shock, a good rebuild with the proper valving on the stocker will work just fine for ya.
-
We pulled it apart to get the spring powder coated then put it back together and the reservoir started leaking so I jb welded the end to seal it up. Need to recharge the shock with oil to see if it will work before I go spend money on a new shock