TRX250R.ORG

Site Sponsors => Pumashine 250R Products => Topic started by: Pumashine on February 25, 2014, 08:40:55 PM

Title: The lost stealth shroud thread
Post by: Pumashine on February 25, 2014, 08:40:55 PM: I am guessing I started this thread on the other site and forgot to copy it over here. I hope this is not repetitive of the old thread. The shrouds I am copying came from a shop known as RTC. They are a little on the spendy side as the material was polished and clear plated before it was worked into shape. The side view of the shroud resembles the Stealth aircraft. The main point is to offer a different design than the flat shrouds everyone else makes. But more important is to be at half the price. These will be made with raw aluminum and the customer will paint or PC to match his quad.
(http://upload.wikimedia.org/wikipedia/commons/thumb/a/a1/F-117_Nighthawk_Front.jpg/220px-F-117_Nighthawk_Front.jpg)
I took the program I had and added an extra inch to one side to create the V. RTC uses 2 inches and the V seems a bit steep. So as not to copy the other guys I will stick with these.
(http://i57.tinypic.com/20f2r11.jpg)
The front view shows how wide these will be.
(http://i57.tinypic.com/2psjfcx.jpg)
With a little color.
(http://i57.tinypic.com/2gwysxy.jpg)
(http://i58.tinypic.com/2cnzgqp.jpg)
Title: The lost stealth shroud thread
Post by: supernutt on February 25, 2014, 08:45:57 PM: Put my name on a set or 2 for sure!!!!!
Title: The lost stealth shroud thread
Post by: Pumashine on February 25, 2014, 08:47:22 PM: Quote from: supernutt;26902
Put my name on a set or 2 for sure!!!!!
I still have your PM...that was not lost

Went back to see where I left off. The shrouds from a side view have a dip to them. So rev 1 is adding 3/8 of an inch to the center of the V so it will appear straight after bending.
(http://i59.tinypic.com/2ewekqt.jpg)
Title: The lost stealth shroud thread
Post by: 05450r on February 25, 2014, 11:51:46 PM: The front view pic was always one on my favorites, those shrouds with the green frame looks like some kind of angry reptile! !! :ride:
Title: The lost stealth shroud thread
Post by: bholzgen on February 26, 2014, 08:25:09 AM: Will you be doing a polished set of these?
Title: The lost stealth shroud thread
Post by: Pumashine on February 26, 2014, 09:27:58 AM: Quote from: bholzgen;26945
Will you be doing a polished set of these?
Yes, in stainless and aluminum
Title: The lost stealth shroud thread
Post by: pinned250r on February 26, 2014, 09:46:27 AM: You say 1/2 the cost, roughly what are these going to cost? cuz im digging the design!
Title: The lost stealth shroud thread
Post by: etccb on February 26, 2014, 10:02:05 AM: Look good. I like those.
Title: The lost stealth shroud thread
Post by: havinnoj on February 26, 2014, 10:05:45 AM: Any pics mounted with plastic or on a complete bike? Trying to get an idea how it'll look with the "bowed sections"
Title: The lost stealth shroud thread
Post by: rablack21 on February 26, 2014, 10:07:32 AM: It will be excited to see these completed. Can't wait to get ahold of some new shrouds!
Title: The lost stealth shroud thread
Post by: Pumashine on February 26, 2014, 02:33:17 PM: Quote from: havinnoj;26967
Any pics mounted with plastic or on a complete bike? Trying to get an idea how it'll look with the "bowed sections"
I remember posting pics I got from other members on ATVriders. http://www.atvriders.com/vbb/showthread.php?465221-RTC-Radiator-Shrouds&highlight=Radiator+Shrouds
Sam posted a link in this thread to .Net which may have been deleted http://www.trx250r.net/forum/body/20327-pumas-stealth-shrouds.html

They are the same size as my originals. Just added an inch for the V
(http://i61.tinypic.com/b8sftc.jpg)
(http://i61.tinypic.com/34xj05h.jpg)
Title: The lost stealth shroud thread
Post by: rablack21 on February 26, 2014, 02:43:46 PM: When you think you might have some ready Tony?
Title: The lost stealth shroud thread
Post by: Pumashine on February 26, 2014, 02:49:08 PM: Quote from: rablack21;26996
When you think you might have some ready Tony?
It hurts too much to think. I just have to get back on them. I promised a set to member #300 last August. He is needing them for his dune trip in March. I gotta get these figured out and modified to fit his frame/radiator.
Title: The lost stealth shroud thread
Post by: Pumashine on March 23, 2014, 11:51:55 AM: I grabbed this pic off FB to show yall. Got to get Nicks set done today

(https://scontent-a-sea.xx.fbcdn.net/hphotos-ash3/t1.0-9/1794531_707353995983300_1335375343_n.jpg)
Title: The lost stealth shroud thread
Post by: red88r on March 23, 2014, 02:11:16 PM: No kidding. That thing is super clean!
Title: The lost stealth shroud thread
Post by: T8R6X on March 23, 2014, 05:17:44 PM: how much for the set like the picture above i really want a set.
Title: The lost stealth shroud thread
Post by: slayer_424 on March 23, 2014, 05:51:18 PM: Do u have any of these shrouds yet I have been wanting a set for sometime now also what do u have for a price on them
Title: The lost stealth shroud thread
Post by: Pumashine on March 25, 2014, 12:42:37 AM: I worked on them all day Monday. I wanted to do a no finish aluminum for $50 a set. Hope to have everything figured out tomorrow
Title: The lost stealth shroud thread
Post by: Pumashine on March 25, 2014, 06:14:30 PM: Old shrouds had lots of space between shroud and radiator.
(http://i59.tinypic.com/287pyqp.jpg)
New stealth has less than 1/8" gap
(http://i60.tinypic.com/35ireiq.jpg)
Title: The lost stealth shroud thread
Post by: Allison#51 on March 25, 2014, 09:30:31 PM: Cool I'm in!
Title: The lost stealth shroud thread
Post by: 86-250rbuild on March 26, 2014, 12:25:54 AM: Yea tony i will take a set also
Title: The lost stealth shroud thread
Post by: Mitch88R on March 28, 2014, 09:25:48 AM: Those look super sweet. ...I'm ready for a set when you get em done.
Title: The lost stealth shroud thread
Post by: fergmyster on March 28, 2014, 03:01:34 PM: I would like a set also.
Title: The lost stealth shroud thread
Post by: Pumashine on March 29, 2014, 08:42:28 AM: These were the first prototypes sent to Nick Zoucha as a prize for being member #300 on this site

(https://scontent-b-sea.xx.fbcdn.net/hphotos-prn2/v/t34.0-12/1962821_10152286641546113_110284608_n.jpg?oh=0637708b9844f8ab47324228004d1aeb&oe=5338E8AB)
(https://scontent-b-sea.xx.fbcdn.net/hphotos-prn1/v/t34.0-12/14578_10152286642041113_767749516_n.jpg?oh=de35495018cd2a5a4dbfb871fb27b8cb&oe=53392583)
(https://scontent-b-sea.xx.fbcdn.net/hphotos-prn2/v/t34.0-12/1459898_10152286642171113_580704705_n.jpg?oh=3c6310e98ad5a2038747c0f25cd9611c&oe=53392F63)(https://scontent-b-sea.xx.fbcdn.net/hphotos-prn2/v/t34.0-12/10153889_10152286641801113_2078309399_n.jpg?oh=66f730ea0be4689445fd60f860a438d9&oe=53393743)
Title: The lost stealth shroud thread
Post by: Mitch88R on March 29, 2014, 09:40:03 AM: Look great to me.
Title: The lost stealth shroud thread
Post by: zoucha_42 on March 29, 2014, 06:08:05 PM: (http://forums.trx250r.org/vbulletin_imports/93_1446_2017-04-18_9227.jpg)(http://forums.trx250r.org/vbulletin_imports/93_1447_2017-04-18_7289.jpg)(http://forums.trx250r.org/vbulletin_imports/93_1448_2017-04-18_163.jpg)(http://forums.trx250r.org/vbulletin_imports/93_1449_2017-04-18_7964.jpg)
Title: The lost stealth shroud thread
Post by: fergmyster on March 29, 2014, 11:57:52 PM: Nice bike wear did u get that bumper never seen one before?
Title: The lost stealth shroud thread
Post by: Pumashine on March 30, 2014, 07:37:53 PM: I have 3 sets that are not perfect to give away for shipping cost. $15 if you want to get them shipped. First come first serve.
Title: The lost stealth shroud thread
Post by: Mitch88R on March 30, 2014, 07:44:49 PM: PM sent
Title: The lost stealth shroud thread
Post by: Pumashine on March 30, 2014, 07:51:30 PM: Quote from: Mitch88R;30289
PM sent
OK, great then there are 2 sets left.
Title: The lost stealth shroud thread
Post by: red88r on March 30, 2014, 09:03:16 PM: Pm sent
Title: The lost stealth shroud thread
Post by: Brett on March 30, 2014, 09:43:56 PM: I'm definitely interested in these if the Walsh ones I'm looking at fall through, How will these fit on an oversized radiator like a pwr or Walsh (like I have)?

-Brett-
Title: The lost stealth shroud thread
Post by: Pumashine on March 30, 2014, 10:14:14 PM: Quote from: red88r;30297
Pm sent
Great set #2 is on its way to a happy owner.
Title: The lost stealth shroud thread
Post by: Pumashine on March 30, 2014, 10:19:05 PM: Set #3 is going to Allison#51 and set #4 which I am making in the morning is going to 86-250rbuild. All the prototypes have been spoken for. Everyone will have to wait a week until material comes in and I can get a few good sets made.
Title: The lost stealth shroud thread
Post by: 86-250rbuild on March 30, 2014, 10:25:01 PM: Pm sent tony
Title: The lost stealth shroud thread
Post by: red88r on March 30, 2014, 10:39:58 PM: Quote from: Pumashine;30307
Great set #2 is on its way to a happy owner.

Thanks Tony! Can't wait to get them installed.
Title: The lost stealth shroud thread
Post by: Hawaiiysr on March 31, 2014, 12:01:54 PM: Dang! You guys wake up earlier then me lol! Early bird gets the worm. I think these shrouds would look great on a drag R I'm thinking of building in the future. Sand drags in Hawaii getting serious:) yea!
Title: The lost stealth shroud thread
Post by: zoucha_42 on March 31, 2014, 03:40:36 PM: Thank you fergmyster, its a blingstar maltese bumper for a honda 450

Quote from: fergmyster;30224
Nice bike wear did u get that bumper never seen one before?
Title: The lost stealth shroud thread
Post by: jamieg45 on April 04, 2014, 04:14:32 AM: I'm gonna need a set of these in mirror finished Tony, I want to see how they will look on the pink lsr.
Title: The lost stealth shroud thread
Post by: Pumashine on April 06, 2014, 02:44:43 PM: Quote from: jamieg45;30785
I'm gonna need a set of these in mirror finished Tony, I want to see how they will look on the pink lsr.
Great, for $200 you can decide how they look on your pink bike. If you don't like the Bling then put them on another one of your spoiled bikes.
Title: The lost stealth shroud thread
Post by: jamieg45 on April 15, 2014, 12:01:27 PM: Quote from: Pumashine;30976
Great, for $200 you can decide how they look on your pink bike. If you don't like the Bling then put them on another one of your spoiled bikes.

Ok tony sounds good to me, I will have the money in a few weeks for them and just send it. Just let me k kw when there are done sir.. This is no joke I want them.
Title: The lost stealth shroud thread
Post by: Pumashine on April 15, 2014, 12:17:31 PM: Quote from: jamieg45;31569
Ok tony sounds good to me, I will have the money in a few weeks for them and just send it. Just let me k kw when there are done sir.. This is no joke I want them.
Yes, I know you want them. I am still going to make these for $50 a set from .060 aluminum unfinished. When anyone asks about the price of the mirror finish stainless polished on both sides they are usually thinking maybe $100 a set. But you are the 3rd member who needs to have the polished stainless. If you live on the coast or around large bodies of water the polished aluminum fades very quickly.
Title: The lost stealth shroud thread
Post by: jamieg45 on April 15, 2014, 12:19:15 PM: Ok bud, I don't live on the coast just want the mirror set up like Jon's

Sent from my SPH-L900 using Tapatalk
Title: The lost stealth shroud thread
Post by: Pumashine on April 20, 2014, 05:05:24 PM: Quote from: spiritaces;31595
Thats right, everybody wants my pristine set up!!
Only to see their ugly face when taking pictures.
(http://i60.tinypic.com/33eojdk.jpg)
(http://i59.tinypic.com/jfwaki.jpg)
Front view is not as exciting as double sided polish
(http://i60.tinypic.com/oho32w.jpg)

And I hope Ryan is happy there is less than a 1/4" gap between the shroud and radiator.
(http://i62.tinypic.com/23h635x.jpg)
Title: The lost stealth shroud thread
Post by: etccb on April 20, 2014, 05:22:40 PM: Nice!!!!!
Title: The lost stealth shroud thread
Post by: Pumashine on April 21, 2014, 10:31:00 AM: Quote from: etccb;31945
Nice!!!!!
Thanks bud, I made 4 sets of these before finding out they look like shxx. I am sending a set of these to pinned and sameltoe for shipping of $20. I have 2 more sets to give away for the shipping price. 1st come 1st serve. Just want to see if anyone even watches these threads!
Title: The lost stealth shroud thread
Post by: Pumashine on April 21, 2014, 10:36:47 AM: Quote from: spiritaces;31982
Good deal someone hop on the free train (well 20 train)

Sent from my iPhone using Tapatalk

I had to butcher an old grill to get them to fit. Then this morning I did the last rev where they meet the grill apron. I now am finished with the prototypes. Working on double sided polish today.
Title: The lost stealth shroud thread
Post by: Hawaiiysr on April 21, 2014, 01:10:12 PM: Everyone watches your threads Tony!
Title: The lost stealth shroud thread
Post by: etccb on April 21, 2014, 02:05:16 PM: Those shown are perfectly use able and shine shine shine from the side. Sweet deal.
These are really a nice setup that puma is making.
Title: The lost stealth shroud thread
Post by: Pumashine on April 21, 2014, 03:09:54 PM: Quote from: Hawaiiysr;31999
Everyone watches your threads Tony!
Hey Josh I gave your set to Pinned250r. These double sided mirror finish are easier than I thought. You get the first set. Won't have pics until Wednesday.
Title: The lost stealth shroud thread
Post by: TRXforever on April 21, 2014, 03:45:31 PM: Quote from: Pumashine;31981
Thanks bud, I made 4 sets of these before finding out they look like shxx. I am sending a set of these to pinned and sameltoe for shipping of $20. I have 2 more sets to give away for the shipping price. 1st come 1st serve. Just want to see if anyone even watches these threads!

I would take a set for shipping cost. (http://forums.trx250r.org/vbulletin_imports/736_1704_2017-04-18_9760.jpg)Just got my rezzie holders powdered and installed BTW. They are awesome, Thank you !
Title: The lost stealth shroud thread
Post by: Pumashine on April 21, 2014, 06:03:01 PM: Quote from: TRXforever;32024
I would take a set for shipping cost.Just got my rezzie holders powdered and installed BTW. They are awesome, Thank you !

Great, the other 2 sets are now spoken for. One for you and the other set for Jeff at FerrinMotorsports.
Title: The lost stealth shroud thread
Post by: TRXforever on April 21, 2014, 07:21:06 PM: awesome let me know where to send the funds.
Title: The lost stealth shroud thread
Post by: Hawaiiysr on April 21, 2014, 09:18:55 PM: Quote from: Pumashine;32015
Hey Josh I gave your set to Pinned250r. These double sided mirror finish are easier than I thought. You get the first set. Won't have pics until Wednesday.
No complaints here:)
Title: The lost stealth shroud thread
Post by: pinned250r on April 25, 2014, 10:12:23 AM: Justs an FYI guys, these things are wicked cool on the screen, but 10x cooler in person. Got mine last night and wow.
Title: The lost stealth shroud thread
Post by: JesseA420 on April 25, 2014, 10:28:03 AM: those look so good, i may have to get some polished stainless ones

(http://1.bp.blogspot.com/-YlNEtWVGoAQ/T0dx2hZ71GI/AAAAAAAAAzg/As0eZtbx2Ug/s320/jimmy-fallon-popcorn.gif)
Title: The lost stealth shroud thread
Post by: Pumashine on May 11, 2014, 12:57:17 PM: Double sided polished
(http://i57.tinypic.com/2le6yw7.jpg)
(http://i59.tinypic.com/imqsn5.jpg)
(http://i57.tinypic.com/rw86tu.jpg)
Just have to make the new grills so complete sets are available.
Title: The lost stealth shroud thread
Post by: TRXforever on May 11, 2014, 02:51:15 PM: I would be interested in one of those grilles! I just got my polished outsides on and they are awesome! Thanks again...
Title: The lost stealth shroud thread
Post by: Pumashine on May 11, 2014, 03:43:18 PM: Quote from: TRXforever;33671
I would be interested in one of those grilles! I just got my polished outsides on and they are awesome! Thanks again...
You will notice there is a hole on each side of your shroud where the apron will attach. The old program made the grill and apron a one piece part and was very time consuming to install. Removal of the steering stem was the norm. Not gonna go there anymore. The grill will attach to the radiator with 4 screws and the apron will attach to the grill and shroud.
Title: The lost stealth shroud thread
Post by: TRXforever on May 11, 2014, 09:15:14 PM: Sounds awesome! I would take a kit, for sure!
Title: The lost stealth shroud thread
Post by: traxman on May 11, 2014, 09:18:04 PM: pm sent
Title: The lost stealth shroud thread
Post by: TRXforever on May 11, 2014, 09:18:22 PM: Is that red anodizing or powder?
Title: The lost stealth shroud thread
Post by: rablack21 on May 12, 2014, 08:06:02 AM: I need a grille as well. I will get one as soon as you have them ready, Tony.
Title: The lost stealth shroud thread
Post by: Sky on May 12, 2014, 09:42:28 AM: Puma a-shinin away! Those look fantastic
Title: The lost stealth shroud thread
Post by: Pumashine on May 12, 2014, 10:52:00 AM: Quote from: rablack21;33725
I need a grille as well. I will get one as soon as you have them ready, Tony.
Hey Ryan, I will probably send you a new set of shrouds as I do not think those will fit the new apron. What problems did you encounter mounting those up? I think you said the a-arms hit. But these are 1/2" higher than the old ones so I do not think I can fix that.
Title: The lost stealth shroud thread
Post by: rablack21 on May 12, 2014, 10:57:55 AM: Quote from: Pumashine;33737
Hey Ryan, I will probably send you a new set of shrouds as I do not think those will fit the new apron. What problems did you encounter mounting those up? I think you said the a-arms hit. But these are 1/2" higher than the old ones so I do not think I can fix that.

Mounting them up was no problem. The one hole was about 3/4" off at the top, but you told me that before you sent them. They did hit the a-arms, so I grabbed the bottom front corner and pushed them up which bent everything slightly upward. I also took a hammer and bent the edge/corner up just a little til it cleared. Whatever you end up with, I'm sure I can make it work either way. :friendly_wink:
Title: The lost stealth shroud thread
Post by: Pumashine on May 12, 2014, 11:08:10 AM: Quote from: TRXforever;33700
Is that red anodizing or powder?
That was the anodized red color the run we made 15 years ago ended up being. There are just not enough of these made to get them anodized different colors. If I was making a 100 pieces it would be no problem. It is more economical for you to send them to powder along with your other build parts. It was a $100 minimum for any color 15 years ago. Many parts were damaged in the process also. But back then there were 6 people working here. Now its just me.
Title: The lost stealth shroud thread
Post by: TRXforever on May 12, 2014, 04:29:40 PM: I would be fine with raw material. I have a great local powder coater! Let me know when these grille/apron sets are available, I am definately ALL IN on a set!
Title: The lost stealth shroud thread
Post by: Pumashine on May 31, 2014, 08:12:38 PM: I pulled the shrouds off the 88 and put them on a bare frame to get a couple pics with a grill I made for Higgy 5 years ago
(http://i62.tinypic.com/2qkqpsj.jpg)
(http://i60.tinypic.com/2ltovu0.jpg)
(http://i61.tinypic.com/2w5n9na.jpg)
(http://i59.tinypic.com/n2zhop.jpg)

Oh yeah, and a top view so you can see that shrouds are fit to the top of the radiator also. There are not any other shrouds that do this. (http://i61.tinypic.com/2posl1s.jpg)
Title: The lost stealth shroud thread
Post by: Hawaiiysr on May 31, 2014, 10:30:30 PM: Dam Tony you got skills!
Title: The lost stealth shroud thread
Post by: bnau267 on May 31, 2014, 10:35:06 PM: Quote from: Hawaiiysr;35467
Dam Tony you got skills!

Second that. Those are bad as$
Title: The lost stealth shroud thread
Post by: TRXforever on June 01, 2014, 07:36:59 AM: Grilles for sale yet? I am wanting one pretty bad!
Title: The lost stealth shroud thread
Post by: CeaserTheThird on June 23, 2014, 12:05:20 PM: Any updates Tony ?
Would love to own a set...
Title: The lost stealth shroud thread
Post by: Pumashine on July 05, 2014, 02:53:19 PM: Quote from: CeaserTheThird;37314
Any updates Tony ?
Would love to own a set...

Working on the grill and apron. The lip needs to be bent up a few more degrees. To get the correct angle of the apron a strip is placed flat along the plain you want to end up at and bend to meet where you want the flange to start. The white strip is the one I'm working with. The apron will get the same bend.
(http://i59.tinypic.com/2mr8mtd.jpg)
Title: The lost stealth shroud thread
Post by: Pumashine on July 05, 2014, 06:01:06 PM: Quote from: TRXforever;35484
Grilles for sale yet? I am wanting one pretty bad!
I am pretty close to the perfect fit. Just have to make a couple perf designs now.

(http://i57.tinypic.com/2mobcsh.jpg)

(http://i58.tinypic.com/20js6s3.jpg)
Title: The lost stealth shroud thread
Post by: red88r on July 06, 2014, 12:00:04 AM: Dannng.....I might have to scrap the the ones on my 87 build and buy this complete setup now......
Title: The lost stealth shroud thread
Post by: CeaserTheThird on July 06, 2014, 02:13:43 AM: Let me know when your finished, I'll be taking a complete set in stainless & a motor stand.
Title: The lost stealth shroud thread
Post by: wretched73 on July 06, 2014, 10:43:26 AM: Those are so shiny i can hardly tell where one piece ends and the other begins haha
Title: The lost stealth shroud thread
Post by: TRXforever on July 06, 2014, 04:22:02 PM: DAM...that looks REALLY nice! I am definitely ready for a set. Just let me know when.
Title: The lost stealth shroud thread
Post by: CeaserTheThird on August 18, 2014, 01:02:06 AM: Tony checking in see if you have any updates on these beautiful Stealth Shrouds ???

Sent couple PM's didn't get a reply been few weeks or more...

Thank you for the all the great parts you make !
Title: The lost stealth shroud thread
Post by: CeaserTheThird on September 22, 2014, 09:17:56 PM: Dropping in monthly check in, updates ?
Title: The lost stealth shroud thread
Post by: JesseA420 on November 18, 2014, 12:01:15 PM: bump, i need a set of raw aluminummmmmm
Title: The lost stealth shroud thread
Post by: TRXforever on November 20, 2014, 08:21:25 AM: Tony,
I am ready for the grille to go with my shrouds...any updates?
Title: The lost stealth shroud thread
Post by: Jimbo45 on March 09, 2015, 01:07:10 PM: Bumping and tagging this!
Title: The lost stealth shroud thread
Post by: Pumashine on March 17, 2015, 10:53:01 AM: :stupid: Spring is in the air. I am going to be doing a frame swap on the red bike cause the sub-frame is severely cracked. Screw FB. I will only be building these for my peeps. If you are not part of this site then don't expect me to make these parts for you. The only reason I am building these is cause of the face-lift I will be doing more my rider. If you were to get these shrouds on the open market you could expect to pay $250 a set and $400 with the grill. If you try to order these through FB expect to never get them.
Title: The lost stealth shroud thread
Post by: JesseA420 on March 17, 2015, 11:12:45 AM: IN.

pretty pls
Title: The lost stealth shroud thread
Post by: sameltoe on March 17, 2015, 11:24:55 AM: This makes me feel special...
Title: The lost stealth shroud thread
Post by: Pumashine on March 17, 2015, 12:50:42 PM: Quote from: sameltoe;51702
This makes me feel special...

SAM has requested a self cleaning grill to go with his stealth shrouds:rofl:
Title: The lost stealth shroud thread
Post by: TRXforever on March 17, 2015, 03:06:21 PM: Quote from: Pumashine;51699
:stupid: Spring is in the air. I am going to be doing a frame swap on the red bike cause the sub-frame is severely cracked. Screw FB. I will only be building these for my peeps. If you are not part of this site then don't expect me to make these parts for you. The only reason I am building these is cause of the face-lift I will be doing more my rider. If you were to get these shrouds on the open market you could expect to pay $250 a set and $400 with the grill. If you try to order these through FB expect to never get them.

I can't wait. Been wanting one of these fine grilles for a long time.
Title: The lost stealth shroud thread
Post by: Jimbo45 on March 17, 2015, 10:30:49 PM: This is awesome. Mine doesn't even have to be polished. I know, that will break your heart, Tony, I know how much you love to polish. :character0029:
Title: The lost stealth shroud thread
Post by: rockstar on March 18, 2015, 12:15:43 AM: This is my first ever post here been reading and learning here for two years when I got my 250r ( what was there) in boxes and she finally came to the point of maiden voyage... With that said like many of you I've been patiently waiting to hear I could get me a set of these shrouds from Tony. Count me in Tony and I blame you for setting the bar so high that theres no other shrouds that could compare... Please count my 250r in for a set... Thanks
Title: The lost stealth shroud thread
Post by: Leftynanners on March 18, 2015, 01:15:14 AM: I'll take a set as well please! I've been wanting these for a long time.

I've been on this site since the beginning, and was banned from the FB group when I asked to join! So I'm 100% .org!
Title: The lost stealth shroud thread
Post by: CeaserTheThird on March 24, 2015, 10:03:14 PM: Tony will getter done, when? I don't know but I support him :)

I first in line Mr.Pumashine :)

Thank you for the all the help and support !
Ceaser
Title: The lost stealth shroud thread
Post by: traxman on March 25, 2015, 01:54:47 AM: Quote from: CeaserTheThird;52121
Tony will getter done, when? I don't know but I support him :)

I first in line Mr.Pumashine :)

Thank you for the all the help and support !
Ceaser

B.S.!! I had already paid for mine before you ever posted in this thread... I'm first... :chuncky:
Title: The lost stealth shroud thread
Post by: Pumashine on March 25, 2015, 09:23:41 AM: Quote from: traxman;52126
B.S.!! I had already paid for mine before you ever posted in this thread... I'm first... :chuncky:
:rofl: true dat^^^^
Title: The lost stealth shroud thread
Post by: JesseA420 on July 02, 2015, 05:21:56 PM: i take it you never got around to making these mmm?
:coffee_pc:
Title: The lost stealth shroud thread
Post by: Pumashine on July 02, 2015, 06:28:10 PM: Quote from: JesseA420;55710
i take it you never got around to making these mmm? :coffee_pc:
Feel free to take over when ever you get anxious. I am finishing up my frame swap for the 4rth. All shrouds look the same to me. But I think mine just look better. I proly have over 100 hours into these shrouds. If you can slow time down maybee I can make your dead line!
Title: The lost stealth shroud thread
Post by: JesseA420 on July 02, 2015, 07:52:05 PM: just touching base as this hasnt been brought up for a while lol
Title: The lost stealth shroud thread
Post by: sameltoe on July 02, 2015, 08:49:10 PM: :Boobies2::lol:I touched mine today

(http://i1310.photobucket.com/albums/s659/cynnsam/20150426_123910_zpsazdjwt1x.jpg) (http://s1310.photobucket.com/user/cynnsam/media/20150426_123910_zpsazdjwt1x.jpg.html)
Title: The lost stealth shroud thread
Post by: Pumashine on July 03, 2015, 01:19:11 AM: Quote from: sameltoe;55723
:Boobies2::lol:I touched mine today

(http://i1310.photobucket.com/albums/s659/cynnsam/20150426_123910_zpsazdjwt1x.jpg) (http://s1310.photobucket.com/user/cynnsam/media/20150426_123910_zpsazdjwt1x.jpg.html)

I they they look extra nice on your bike Sam
Title: The lost stealth shroud thread
Post by: phil_koliss on July 21, 2015, 11:14:23 PM: Are they still available or this was a member's special? I could use a set and a few of your other parts on your website Tony. Just no polishing or chrome, they will be powder coated black.
Thanks
Title: The lost stealth shroud thread
Post by: Piediddy on November 29, 2015, 08:32:37 AM: Still make these Pumashine? I don't see any on your website
Title: The lost stealth shroud thread
Post by: Wrench U on January 09, 2016, 02:13:45 PM: Say the word. What do I got to do?
Title: The lost stealth shroud thread
Post by: protrax on January 10, 2016, 11:23:47 AM: Tony you should make another run of these beautiful shrouds !
Title: The lost stealth shroud thread
Post by: Pumashine on January 10, 2016, 11:58:28 AM: Quote from: protrax;63085
Tony you should make another run of these beautiful shrouds !
The polished stainless ones are cut. As for colors there are not enough committing to a specific color to get a run anodized aluminum. Seems as if I am always to busy to get these things done.
Title: The lost stealth shroud thread
Post by: protrax on January 10, 2016, 12:04:39 PM: Great I will take a set and some motor mounts
Thanks
Title: The lost stealth shroud thread
Post by: Wrench U on January 11, 2016, 08:53:29 PM: What about a raw aluminum finish? How many units to make a raw aluminum run? I figure that will help with cost and will keep it all in house. Everyone can get there own desired finish. If u can keep the $ down and make $. Everyone is happy. Lol! What about with a grill? Lol!! Ok ill b happy!! Sorry don't mean to b pushy. But u the man!
Title: The lost stealth shroud thread
Post by: Pumashine on January 11, 2016, 09:12:54 PM: Quote from: Wrench U;63128
What about a raw aluminum finish? How many units to make a raw aluminum run? I figure that will help with cost and will keep it all in house. Everyone can get there own desired finish. If u can keep the $ down and make $. Everyone is happy. Lol! What about with a grill? Lol!! Ok ill b happy!! Sorry don't mean to b pushy. But u the man!

Its all about the grill. Never got time to finish the last step. I have 20 sets of the mirror finish 2 sides setting here. Formed up around 8 sets. Some have shipped. Some are waiting for orders. Once I get the grill done I will make a run of aluminum ones cost effective.
Title: The lost stealth shroud thread
Post by: huntertools on January 12, 2016, 08:44:53 PM: PM sent
Title: The lost stealth shroud thread
Post by: Goose on June 26, 2016, 03:25:27 PM: Did u ever find time to get more of these made up? I'd be interested in a set or 2 of them if you did or when you do.