TRX250R.ORG
Riding Styles => Drag Racing => Topic started by: johnny22 on March 07, 2014, 02:00:29 PM
-
its goin down in Santa Maria (http://forums.trx250r.org/vbulletin_imports/15_1134_2017-04-18_8603.jpg)
-
They are really making ways with the track as well.
If you notice in that pic the right lane has a 4ft drop off to a mud bog hole. Supposedly they are going to widen the sand track, and put a K-rail in.
Going to be a good year around here(if I can get my junk to make a clean pass)
-
Where was that posted Johnny?
-
Its gonna be fun man. How did your bike do at bako? Its posted on facebook
-
Huh I was just on there this morning and didn't see it.
Not good in Bako. First time with this setup and just learning as I go. Kept bogging off the line then I got out of the hole FAST then missed a gear. Must have been scared I guess. Even after bogging it would trap @60-61.
Hoping to get some T&T @ Santa Maria
-
They just posted it a couple hours ago. Oh ok. That's all it is just learning and getting used to a light . I've only done it once and its so much different than pismo. You'll get it man. I wish I could've found out where my bike is at bako
-
I've been doing it for the last couple of years now. It was just a new bike setup. A bar, 10paddles, alky....
And yeah I still need to get better at the light. On the sportsman its like "ok go on the last yellow, ok, yellow, yellow, yellow, green, shit it's green , go ,go, go. Damn"
-
I be sleeping at the light ...ha
But I wanna run Santa Maria this year ,track terrain looks good
Started to mess with my jetting
I'm running the same jets in my 370 that I had in my 310 ,maybe leaner needle
Crazy ,just need some bigboy sprockets
-
I checked on that bar and it sold. I may be able to pick up a 4 bar though.
-
the light is hard to get used to. I did exactly what you just explained when I went to santa maria for the tnt. really aj? what jetting are you at if you don't mind me asking
-
180 main ,50 pilot ,third clip on needle
I ran 4th clip on my 310 ,on the 370 I'm running the 3rd (leaner)
I'm also running a wider gap on my plug
-
Dang! I run a 190 main 52 pilot and needle on the third clip.wait what carb do you run? That probably makes a difference
-
I hope I can get my bike back together by then. I need to get some more tnt didn't get much at Bako sand drags
-
I run a 38 A/S
And I probably could go leaner if I could get it back to nate on the Dyno
But I've heard Russell has small jets in his 40 carb
-
Hmm maybe I'm running too rich haha im not sure
-
How did your bike run at bako aj?
-
The motor ran good
I was loading up on the line due to the 52 pilot
So I would come out sputtering,but picked up to 53 mph with 14 37 gearing
Still need to get 15 front sprocket and slap it on
My reaction was horrible and I weight about 270 myself
Still running in the 5's ,but don't wanna post up intell I get my setup perfect
-
Cool man. You can only get better from there. Are you planning to run more 300ft this year?
-
Yes more 300ft ,its addicting
-
haha it is. I knew i wasn't the only one who felt that way!
-
The motor ran good
I was loading up on the line due to the 52 pilot
So I would come out sputtering,but picked up to 53 mph with 14 37 gearing
Still need to get 15 front sprocket and slap it on
My reaction was horrible and I weight about 270 myself
Still running in the 5's ,but don't wanna post up intell I get my setup perfect
What set up do you have?
-
Depends?
U stirring a pot on something or want a honest answer
-
I'm not being offensive towards u Morse
I just don't want to be caught in any bs or lies
-
What set up do you have?
Don't worry Aj, Morse has a lot of info. He is on a few of the drag sites and I don't think I've ever seen him stir it up. If anything take it to PM's if you don't want it out there.
-
Nope I'm about your exact size and had gotten my pro x to run 4.6's pretty consistent. Just wanna help ya out
-
Nope I'm about your exact size and had gotten my pro x to run 4.6's pretty consistent. Just wanna help ya out
Pm sent ,thanks for the help