TRX250R.ORG

General => Projects => Topic started by: Jtwatsonz7 on March 31, 2014, 03:07:36 PM

Title: Esr 310 kit
Post by: Jtwatsonz7 on March 31, 2014, 03:07:36 PM

Hi everyone I'm new here. I have a 88 trx250r I'm strongly considering a brand new esr 310 kit (310 kit 6) with the trx9 center mount exhaust. Any input would be greatly appreciated.

Title: Esr 310 kit
Post by: pinned250r on March 31, 2014, 03:52:38 PM

Well howdy and welcome! What kind of riding do you do? The 9 is a great top end pipe and a ton of fun, it just feels like the top end never ends!

Title: Esr 310 kit
Post by: Tbone07 on March 31, 2014, 03:54:55 PM

I'm assuming you visit the dunes often because you're in Michigan? I nice mid-top ported ESR kit and a similar pipe to go along with it would be a great upgrade

Title: Esr 310 kit
Post by: etccb on March 31, 2014, 04:07:14 PM

Make sure you get the 9 port on the cyl as well. That sounds like a very fun ride....pinned

Title: Esr 310 kit
Post by: aberegg05 on March 31, 2014, 04:12:08 PM

Quote from: pinned250r;30399

Well howdy and welcome! What kind of riding do you do? The 9 is a great top end pipe and a ton of fun, it just feels like the top end never ends!

Very true! I have the 330 +4 with the 9b pipe trx9 port. Great mid to top end.

Title: Esr 310 kit
Post by: Jtwatsonz7 on March 31, 2014, 05:54:52 PM

I ride dunes, trails, and I used to do a lot mx on dirt bikes. My brother in law has a banshee that he re built last year and we want to get the 250r comparable to it. I have done a lot of home work and I was thinking the trx9 bc wanted something more mid range. All my previous toys were built more for low end

Title: Esr 310 kit
Post by: Jtwatsonz7 on March 31, 2014, 06:06:45 PM

That 310 kit I'm considering seems to be a pretty good price for everything it comes with plus you get the matching port. I started looking at building it piece by piece but I would spend more

Title: Esr 310 kit
Post by: etccb on March 31, 2014, 06:56:11 PM

The port match 9 is as cast matched up to the 9 sleave. I would try to fit that + $100.00 trx9 port into the budget if you can.

Title: Esr 310 kit
Post by: aberegg05 on March 31, 2014, 07:32:56 PM

Call eddie himself. He might work with you. He gave me a steal on my cylinder I got off him and trx9 hand port

Title: Esr 310 kit
Post by: slayer_424 on March 31, 2014, 08:25:33 PM

I have an ESR 310 kit with a trx 5r pipe with 9 port suppose to be a very good pipe and recommended with a 38mm      a/s and  a +3 stroker crank I like it myself

Title: Esr 310 kit
Post by: pinned250r on March 31, 2014, 10:34:25 PM

You may want to look into the trx5 pipe too.