TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: supernutt on April 02, 2014, 08:29:50 PM

Title: Needle help
Post by: supernutt on April 02, 2014, 08:29:50 PM

Currently running a CEL needle in #5 position richest setting bottom clip. My machine is not overly rich at 10 degrees. Would like to get the clip back into the middle position. Needle just seems a little lean everywhere.  So do I need a CCL or a DCK to get the clip back towards the middle?  My other machine is about the same as far as jetting and same issue with that one. 76x72 pro-x Neil's porting on race gas 38 pwk trx5 pipe cr ignition.

Title: Needle help
Post by: C-Leigh Racing on April 03, 2014, 10:39:56 AM

Try a DGH, they just seem to work better with the big bores.
Neil

Title: Needle help
Post by: supernutt on April 03, 2014, 12:43:36 PM

Ok. Thanks Neil. I will get one coming